Advertisement
Quick Links
20____
Year of Manufacture:
Utility Cart and Dri-Cab
Assembly, Operating, and Maintenance Instructions
Contents
Utility Cart Assembly
Dri-Cab Assembly
Safety, Operation, and Maintenance
Wiring Diagram
Warranty
Serial Number:
VTX
(Please log your machine's serial number and date of purchase for future reference.)
(Dri-Cab Shown)
Page#
Date:____
Vastex International, Inc.
7 Emery St
Bethlehem, Pa. 18015 USA
Phone# 610 625-2702 Fax# 610 625-2775
Web Site www.vastex.com
2
Authorized Representative in Europe:
Certification Experts BV
Nieuwstad 100 1381 CE Weesp,
3-5
The Netherlands
Tel : + 31 (0) 294 – 48 33 55
6
Fax : + 31 (0) 294 – 41 46 87
7
Vastex E-mail assistance
8
Purchasing & Product Info:
sales@vastex.com
Electrical Support:
stech@vastex.com
Tech Support, Mechanical Setup, and Operation:
/
/
____
______
techsupport@vastex.com
Screen Printing Issues & Support:
printech@vastex.com
Doc. # 01‐14‐012A
Original Instruc ons
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for VASTEX VDC-2331
Summary of Contents for VASTEX VDC-2331
- Page 1 Doc. # 01‐14‐012A 20____ Year of Manufacture: Original Instruc ons Utility Cart and Dri-Cab Assembly, Operating, and Maintenance Instructions (Dri-Cab Shown) Vastex International, Inc. 7 Emery St Bethlehem, Pa. 18015 USA Phone# 610 625-2702 Fax# 610 625-2775 Contents Page# Web Site www.vastex.com Utility Cart Assembly...
- Page 2 Assembly Tools Needed: (1) Philips Head Screwdriver, (2) 7/16” open end wrench or socket, (1) Adjustable wrench or 3/4” Open end/Socket Wrench, Tape Measure. Hardware List: A– Caster(4) Parts List: B– 1/2-13” Hex Nut(4) G– Bottom Panel (Note 4 large holes for casters) C–...
- Page 3 - Use a Phillips head screwdriver for Sheet metal screws 6) Install **Screen Shelves as shown below, start from bottom. **UC-1000 has 10 shelves, UC-1000-1 has 20 shelves and VDC-2331 has 20 shelves. 5) Utility Cart Assembly Finished. Please continue for Dri-Cab Assembly...
- Page 4 Dri-Cab Assembly Le Side Right Side Hardware List: Parts List: A– #8x3/8” Phillips Sht Metal Screw(24) F– Back Panel B– 4-40 x 5/8” Phillips Pan Head Bolt(4) G– Diffuser H– Hinge Bracket– Door C– 4-40 Hex Nut w/ star washer(4) D– #8 x 3/8” Sheet Metal Screw-Blunt tip(10) J–...
- Page 5 Dri-Cab Assembly cont’d 4) Install Hinge Brackets using 1/4-20 bolts and Serrated nuts. Leave this slightly loose un- til door is aligned. 5) Install (3) Catches using #4 bolts and nuts. Leave this slightly loose until door is aligned. 6) Install 4 pieces of rubber seal around front outside edge of cabinet.
- Page 6 VASTEX Screen Drying Cabinet is intended for the drying of emulsion on screen printing screens. Do not use for any other purpose unless authorized by Vastex International, Inc. Use of this equipment for any other purpose can be dangerous and may cause damage to this equipment voiding the warranty.
- Page 8 The defective part or parts will be repaired or replaced at the discretion of Vastex International, Inc. If the equipment in question is less than one (1) year old, it will be shipped to the customer at no charge, with an RGA issued by Vastex for the defective part. The defective part must be shipped back to Vastex freight prepaid within 30 days or the account will be billed.
Need help?
Do you have a question about the VDC-2331 and is the answer not in the manual?
Questions and answers