Page 2
NOTE: The serial number of your machine is located on the back of the handlebars. SERIAL NUMBER SERI RI RIAL UMBE AS OUR POLICY IS ONE OF CONSTANT IMPROVEMENT - ALL INFORMATION AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. - 2 - TC-EDGE-ISO-OP-EN...
TABLE OF CONTENTS Table of Contents Safety Messages Scrub Scrub With Water Change Pad Weights Moving Machine Operation Motor Information Common Wear Parts EDGE Pads and Screens: EDGE Diamonds For Polishing Marble/Terrazzo: - 3 - ISO-EDGESTICK-OP-EN...
• Use caution when maneuvering close to walls • Use PPE BEFORE LEAVING THE MACHINE: • Turn the machine OFF and unplug the power cord BEFORE SERVICING THE MACHINE: • Turn the machine OFF and unplug the power cord - 4 - TC-EDGE-ISO-OP-EN...
Page 5
Do not operate this machine if any parts this machine. have been damaged or removed. CAUTION CAUTION Always unplug the power cord before changing the pad. Alterations to this machine may result in personal injury or property damage, and WILL void the warranty. - 5 - ISO-EDGESTICK-OP-EN...
Scrubdeck motor 6. SWIVEL CORD WRAP: Rotate the cord wrap to allow for easy coiling and uncoiling of the Power cord 7. SLOTTED WEIGHT PLATES (OPTIONAL): Add/remove weight plates for different Pad and application usage - 12 - TC-EDGE-ISO-OP-EN...
Lower operating temperature, longer life, and lower noise levels are typical benefi ts of high effi ciency motors. FLPF = Full Load Power Factor The ratio of real or true power and the apparent power that is supplied [PF=P(watts)/S(va)] - 13 - ISO-EDGESTICK-OP-EN...
6000 Grit Diamond Polishing Pad EDGE-4070 Tile/Grout Renovator Pad EDGE-4018 Microfi ber Pad EDGE-4036 Abrader Plate EDGE-4011 Dominator HD Strip Pad EDGE-4006 Maroon ECO Prep Pad EDGE-4007 Remover Burnishing Pad EDGE-4008 Porko Burnishing Pad EDGE-4017 Velcro Pad 300-4023 - 14 - TC-EDGE-ISO-OP-EN...
Page 15
BLANK THIS PAGE WAS INTENTIONALLY LEFT BLANK...
Need help?
Do you have a question about the ISO and is the answer not in the manual?
Questions and answers