Page 1
Operating Instructions Pole Pruner Attachment WARNING: To reduce the risk of injury, fire, or electric shock, please read and understand the operating instructions for this product. Save these instructions for future reference.
FIXED HEAD PRUNER ATTACHMENT - MFT26I-PS-FA with shear-proof protection devices. - Always wear protective gloves and eye-goggles Parts and Controls and safety anti-shear boots with non-slip soles. - Always wear ear and hearing protection devices. - Never wear scarves, shirts, necklaces, or any hang- chine or in any objects or materials in the work area.
F) CAUSES AND OPERATOR PREVENTION OF KICK- • BACK: by the manufacturer. Incorrect replacement bars and chains may cause chain breakage and/or kickback. Kickback may occur when the nose or tip of the guide • Follow the manufacturer‘s sharpening and main- bar touches an object, or when the wood closes in and tenance instructions for the saw chain.
Page 4
- Mount the bar (4) by inserting the stud bolt (3) in the groove and push it towards the back of the starter unit properly in the hole on the bar; if it isn’t, turn the chain tension adjuster screw (6) using a screwdriver until the pin is completely inserted.
- Check the chain tension. The tension is correct when Checking the oil delivery the drive links do not slip out of the chain guides if you WARNING! Make sure the bar and the chain are hold the chain in the middle of the bar. in place when you check the oil delivery.
Page 6
Working position • To avoid tearing the bark on thick branches, always start by performing a relieving cut (1) on the underside Hold the control handle with your right hand, and the drive of the branch. tube with your left hand. Your left arm should be extended •...
MAINTENANCE AND STORAGE WARNING! To ensure that the chainsaw works WARNING! During maintenance operations: components are well-sharpened. - Disassemble the pruner rod from the brush cutter. Sharpening is necessary when: - Use protective gloves when handling the bar and • The sawdust looks like dust. chain.
Page 8
To avoid asymmetrical wear on the bar, make sure it is turned over periodically. To keep the bar in perfect working order, proceed as fol- lows: - grease the bearings on the nose sprocket (if present) with the syringe; - Clean the bar groove with the scraper (not included); - clean the lubrication holes;...
Need help?
Do you have a question about the E Series and is the answer not in the manual?
Questions and answers