1 DESCRIPTION Time relay RT-SBE EKF is an electronic switching device with an adjustable time setting The relay is designed to switch on the load after the signal appears and switch it off with a time delay after the signal disappears. Time delay can be adjusted using the dials on the front panel of the relay.
Page 4
Control panel Power (green LED) Output (red LED) Time delay selection dial Time delay multiplier dial (10% - 100%) Function diagram The relay activates at signal S detection (leading edge) and deactivates with an off delay after the signal S disappears (tailing edge).
Setup: • Install and secure the relay in the intended location. • Connect the relay as per wiring diagram. • Energize the relay, the "U" LED will light up green. • Set up the required time ranges. Wiring diagram 3 OVERALL AND INSTALLATION DIMENSIONS Fig.
9.4 Service life: 10 years. Manufacturer: For information, refer to the product packaging. Importer and EKF trademark service representative: EKF ELECTRICAL SOLUTION – FZCO, Dubai Silicon Oasis, DDP, Building A2, Dubai, United Arab Emirates. Importer and EKF trademark service representative on the terri- tory of the Russian Federation: OOO «Electroresheniya»,...
Need help?
Do you have a question about the RT-SBE and is the answer not in the manual?
Questions and answers