Cisco Linksys PLS300 User Manual page 10

Powerline av network adapter; powerline 4-port av network adapter; powerline av network kit

Hide thumbs Also See for Linksys PLS300:

Table of Contents

Chapter 3

On Adapter 1 or 2, press and hold the HomePlug Simple

Connect button

for two seconds. Then release the

button. The Power LED starts flashing.

After the Network Password is configured, Adapter 3

will restart, and the Power and Powerline LEDs

light up.

(If the Powerline LEDs do not light up, try again; repeat

steps 1-3.)

Power, Ethernet, and Powerline LEDs are Lit

NOTE:

The Powerline LED

the connection between Adapter 3 and your

powerline network has been established.

Repeat steps 1-4 to add additional Adapters, one at a

time.

Congratulations! Security has been configured for the

additional Powerline AV Adapter(s).

Powerline AV Network Adapter

indicates that

Advanced Security

Table of Contents

Show Quick Links

Table of Contents