Table of Contents
Advertisement
When I attach the receiver to the rear of my TV or external display, I
cannot get a clear image on my TV or external display.
The metallic rear panel of some TV or external display models may cause a
wireless signal decay or interference. This will result to an unclear display
image on your TV or external display.
We recommend that you provide a clear path between the receiver and
transmitter.
The receiver with the velcro sticker would not stick to the external
display.
Clean the surfaces of the devices with a clean cloth before using the Velcro
sticker to attach the receiver to the external display. This will ensure that the
receiver will firmly attach to the external display.
The receiver cannot stand firmly in place.
Your receiver has a sticker at the bottom to make it stand firmly in place.
If the receiver cannot stand firmly in place, gently wipe the receiver's bottom
with a clean and mildly soapy damp cloth.
Notices
REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and
Restriction of Chemicals) regulatory framework, we published the chemical
substances in our products at ASUS REACH website at
http://green.asus.com/english/REACH.htm.
Federal Communications Commission Interference Statement
EW2000RX FCC ID: MSQ-EW2000RX
EW2000TX Contain Module FCC ID: MSQ-EW2000TX
This device complies with FCC Rules Part 15. Operation is subject to the
following two conditions:
•
This device may not cause harmful interference.
•
This device must accept any interference received, including interference
that may cause undesired operation.
1
E6158_EW2000_UM.indd 18
10/12/10 4:44:26 PM
Advertisement
Table of Contents
