Subscribe to Our Youtube Channel
Related Manuals for Millennium USB-RS232-ISO
Summary of Contents for Millennium USB-RS232-ISO
- Page 1 USB TO SERIAL CONVERTER MODEL: USB-RS232-ISO USER MANUAL VER 1.0 MILLENNIUM TECHNOLOGIES 440, MASTER MIND 1, ROYAL PALMS ESTATE’ AAREY MILK COLONY, GOREGAON (EAST), MUMBAI – 400065, INDIA. PH: - 91-22-65229736, 91-22-28794703...
-
Page 2: Table Of Contents
TABLE OF CONTENTS INTRODUCTION ........................... 1 1.1. PRODUCT DESCRIPTION ..................1 1.2. FEATURES........................1 1.3. SPECIFICATIONS ....................... 1 1.4. CONNECTION DETAILS ..................... 2 DRIVER INSTALLATION ......................3 HARDWARE INSTALLATION ....................6... -
Page 3: Introduction
1. INTRODUCTION 1.1. PRODUCT DESCRIPTION The USB-RS232-ISO converter allows you to connect legacy serial devices with RS232 interface to the USB port. It adds COM port to your computer. It provides isolated output with 3-pin terminal block connector for RS232 communications and USB-A plug is provided for USB communications. -
Page 4: Connection Details
Millennium Technologies USB-RS232-ISO User Manual V1.0 LED Indication Blinks when converter is transmitting the data Blinks when converter is receiving the data Dimensions L x W x H 89x23x17 mm 1.4. CONNECTION DETAILS Connector Description To connect Device to Computer using Standard USB... -
Page 5: Driver Installation
Please proceed with the following steps to install the device driver: 1. Please insert the CD as bound with USB-RS232-ISO converter into your CD/DVD ROM, and run the "CDM v (latest version) WHQL Certified.exe" file locate within the CD driver. - Page 6 Millennium Technologies USB-RS232-ISO User Manual V1.0 2. Click ‘Next’ to proceed. 3. Wait while the device drivers are being installed. March 30, 2016...
- Page 7 Millennium Technologies USB-RS232-ISO User Manual V1.0 4. Once installation is complete, Windows will notify you that it has finished installing the software. Click ‘Finish’ to close the installation wizard. Checking the device driver installation 1. Connect the USB-RS232 ISO converter to the USB port of computer.
-
Page 8: Hardware Installation
Millennium Technologies USB-RS232-ISO User Manual V1.0 3. HARDWARE INSTALLATION Step 1: Connect USB port of the converter to the USB port of computer. After connecting the USB to serial converter, then a message as “Installing Device Driver Setup” will pop-up on screen. However, the device driver needs to be installed in computer in advance.
Need help?
Do you have a question about the USB-RS232-ISO and is the answer not in the manual?
Questions and answers