Subscribe to Our Youtube Channel
Related Manuals for Millennium USB-RS485 ISO
Summary of Contents for Millennium USB-RS485 ISO
- Page 1 USB TO SERIAL CONVERTER MODEL: USB-RS485 ISO USER MANUAL VER 1.0 MILLENNIUM TECHNOLOGIES 440, MASTER MIND 1, ROYAL PALMS ESTATE’ AAREY MILK COLONY, GOREGAON (EAST), MUMBAI – 400065, INDIA. PH: - 91-22-65229736, 91-22-28794703...
- Page 2 TABLE OF CONTENTS INTRODUCTION ........................... 1 1.1. PRODUCT DESCRIPTION ..................1 1.2. FEATURES........................1 1.3. SPECIFICATIONS ....................... 1 1.4. CONNECTION DETAILS ..................... 2 DRIVER INSTALLATION ......................3 HARDWARE INSTALLATION ....................6...
- Page 3 1. INTRODUCTION 1.1. PRODUCT DESCRIPTION The USB-RS485 ISO converter allows you to connect legacy serial devices with RS485 half-duplex interface to the USB port. It adds COM port to your computer. It provides isolated output with 2-pin terminal block connector for RS485 communications and USB-A plug is provided for USB communications.
- Page 4 Millennium Technologies USB-RS485-ISO User Manual V1.0 LED Indication Blinks when converter is transmitting the data Blinks when converter is receiving the data Dimensions L x W x H 89x23x17 mm 1.4. CONNECTION DETAILS Connector Description To connect Device to Computer using Standard USB...
- Page 5 Please proceed with the following steps to install the device driver: 1. Please insert the CD as bound with USB-RS485 ISO converter into your CD/DVD ROM, and run the "CDM v (latest version) WHQL Certified.exe" file locate within the CD driver.
- Page 6 Millennium Technologies USB-RS485-ISO User Manual V1.0 2. Click ‘Next’ to proceed. 3. Wait while the device drivers are being installed. March 30, 2016...
- Page 7 Click ‘Finish’ to close the installation wizard. Checking the device driver installation 1. Connect the USB-RS485 ISO converter to the USB port of computer. 2. Go to “Control Panel” “Device Manager”. You can see the list of all hardware devices installed on your computer.
- Page 8 Millennium Technologies USB-RS485-ISO User Manual V1.0 3. HARDWARE INSTALLATION Step 1: Connect USB port of the converter to the USB port of computer. After connecting the USB to serial converter, then a message as “Installing Device Driver Setup” will pop-up on screen. However, the device driver needs to be installed in computer in advance.
Need help?
Do you have a question about the USB-RS485 ISO and is the answer not in the manual?
Questions and answers