How To Use The Tone Switch Buttons; Use The Edit Assign Buttons To Select Parameters - Roland JV-90 Owner's Manual

Mi Operation guide
@ How to use the TONE SWITCH buttons
%& The button indicator Is lit when on.
TONE SELECT
paren | i 7am || aaa
See
PERFORM P| Zz
Sam
————.—_——-—Y'
* The on/off setting you make for each Tone using the TONE SWITCH buttons ([1]—[4]) is stored as part of the Patch
settings when you use the Write operation (p.87).
@ Use the assign buttons to select parameters
Patch name
Parameter
Patch number (*) Tone 1 Tone 2
Set value
(*) U) = internal, 1; = DATA card, A/B/C /[ =preset(group),
Fy or Fk = PCM card, §,/f/ / & = wave expansion board, 3 or k =JV - 80 compatible preset
The display will show the parameter values for each Tone. Use parameter sliders 1—4 to adjust the values for Tones 1 —4.
EDIT PALETTE
OCT DOWN. DCTP jq PATCH
'CHORUS REVERS 'TK — LOCAL ~ RX <
SS—PARTSEL— G16 |@V-EXP
aE ga re
cn a reno
Edit assign buttons
7