Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Redexim Verti-Air 7
Summary of Contents for Redexim Verti-Air 7
- Page 1 Verti-Air® 7 Translation of the original user manual Versie: UM145.700.000EN-2422 Applies to: 145.700.000 Verti-Air® 7 Redexim B.V. | Kwekerijweg 8 | 3709 JA Zeist | The Netherlands T: +31 (0)306 933 227 | E: redexim@redexim.com | W: www.redexim.com...
-
Page 2: Eu - Declaration Of Conformity
EU - DECLARATION OF CONFORMITY Redexim B.V. Kwekerijweg 8 3709 JA Zeist, The Netherlands declare that this “EU - DECLARATION OF CONFORMITY” is issued under our sole responsibility and belongs to the following product: VERTI-AIR® 7 WITH MACHINE NUMBER AS INDICATED ON THE MACHINE AND IN THIS... -
Page 3: Declaration Of Conformity
UK - DECLARATION OF CONFORMITY Redexim B.V. Kwekerijweg 8 3709 JA Zeist, The Netherlands declare that this “UK - DECLARATION OF CONFORMITY” is issued under our sole responsibility and belongs to the following product: VERTI-AIR® 7 WITH MACHINE NUMBER AS INDICATED ON THE MACHINE AND IN THIS... -
Page 4: Foreword
WARRANTY CONDITIONS The warranty, which applies to this product, is described in the "General sales and warranty conditions" under article 12 "Warranties" and is available on the Redexim website. You can use the QR code or URL below for this purpose. -
Page 5: Table Of Contents
TABLE OF CONTENTS EU - DECLARATION OF CONFORMITY................2 UK - DECLARATION OF CONFORMITY ................3 FOREWORD ..........................4 WARRANTY CONDITIONS ....................4 PRODUCT REGISTRATION ....................4 SAFETY INSTRUCTIONS ....................6 1.1. Obligations of the user ......................6 1.2. Maintenance, repairs and adjustments ................6 1.3. Using the machine ......................7 TECHNICAL DATA .......................8 GENERAL DESCRIPTION ...................8 SAFETY STICKERS .....................9... -
Page 6: Safety Instructions
When unskilled people use, maintain or repair the machine, this could result in injuries to the user and to third parties. This should be avoided! Use only original Redexim parts for maintenance or repairs because of the safety of the machine and of the user. -
Page 7: Using The Machine
1.3. Using the machine Attach the machine to the towing vehicle according to the regulations. Pay close attention to the risk of injury! Never use the machine in the absence of protective guards and safety stickers. Check the machine for loose bolts, nuts and components before every operation. Check whether you have a clear field of vision –... -
Page 8: Technical Data
2. TECHNICAL DATA Type 40HP met minimale hefcapaciteit 610mm (24”) achter de hef ogen van Recommended vehicle 210kg (463lbs) Required PTO power >30HP PTO speed 540RPM (CCW) Working speed Depending on the conditions and the required result Weight 210kg (463lbs) 1.16x1.26x1.07m (45.7”x49.6”x42.1”) Dimensions (LxWxH) Three-point system... -
Page 9: Safety Stickers
4. SAFETY STICKERS Safety stickers are attached on the machine. These safety stickers must always be clearly visible and legible and must be replaced if they have become damaged (Fig. 1). Fig. 1 In case of maintenance, adjustments and repair, always switch OFF the engine of the towing vehicle and the PTO. - Page 10 Be careful not to get any parts of your body jammed. 900.280.404 Use certified hearing protection when using the machine. 911.340.410...
-
Page 11: First Installation
5. FIRST INSTALLATION The machine should be prepared for use as follows (see Fig. 2, Fig. 3 and Fig. 4): Make sure that the cable/crane/lift can lift at least 2x the weight of the machine. For the correct machine weight, see chapter 2 "Technical data". Never crawl under the machine. - Page 12 Fig. 3 Fig. 4...
-
Page 13: The Pto Shaft
6. THE PTO SHAFT The description below is only an indication of how to customise the PTO shaft. The instructions described in the specific manual supplied with the PTO shaft are always leading. The PTO shaft is a very important component that takes care of the drive from the tractor to the machine. -
Page 14: Length Of The Pto Shaft
6.1. Length of the PTO shaft The length of the PTO shaft is very important. If it is too long, it can damage the drive of the tractor and/or the machine. If the overlapping length of the cylinders becomes less than 250 mm (9.8”) at any time, it can damage the PTO shaft. -
Page 15: Attaching And Detaching The Machine
7. ATTACHING AND DETACHING THE MACHINE Attaching and detaching the machine has to be done carefully. Follow the instructions below: Fig. 6 7.1. Attaching the machine Controleer de machine vóór het aankoppelen op de volgende punten: Check whether the machine is undamaged and whether it is safe to attach and use the machine. -
Page 16: Detaching The Machine
4. Set the stabilizer of the lifting arms (2) to 100 mm lateral stroke. 5. Mount the top rod (3) onto the tractor and attach it to the machine. Adjust the length of the top rod until the PTO-shaft of the machine is horizontal. If the machine is not correctly mounted behind the tractor, different PTO angles can cause vibrations in the machine's drivetrain. -
Page 17: Transport
8. TRANSPORT The user is responsible for transporting the machine on public roads. Verify the national legislation regarding the regulations. In view of the machine’s weight, it is not advised to drive faster than 20 km/h (12.4mph with a raised machine. Higher speeds can lead to hazardous situations and result in damage to the machine and tractor. -
Page 18: Putting The Machine Into Operation
9. PUTTING THE MACHINE INTO OPERATION 9.1. Safety Before starting to use the machine, check the following: 1. Are there any loose objects on the field, other than what this machine is intended for? Remove them first or keep a sufficient distance from them. 2. - Page 19 If loose components are observed or components do not function properly, the problems must be solved before using the machine. Always lower the machine carefully. 2. Drive to the location where the work should take place. 3. Slowly lower the machine to the ground. 4.
-
Page 20: Technical Information
TECHNICAL INFORMATION In general the Verti-Air® 7 is not a complicated machine. A number of technical items will be explained. If you have further questions regarding this machine, please contact your dealer. 10.1. Hydraulic control reverse spout By using the hydraulic connection ((1) Fig. 8), the position of the reverse spout (2) can be defined. As a result, air is blown out to the left, right or both sides of the machine. -
Page 21: Maintenance
MAINTENANCE 11.1. Maintenance schedule Time schedule Check point Work activities Before every use Check for loose parts, bolts and Tighten loose bolts / nuts with the correct nuts. tightening moment. General check Attach the machine to the tractor and operate the machine for 5 minutes. Listen and observe any strange movements / sounds. -
Page 22: Cleaning
11.2. Cleaning If a high-pressure cleaner is used to clean the machine, then observe the following rules: • Do not use aggressive cleaning agents that can affect the machine. • Maximum water pressure: 70 Bar (1015 PSI) • Maximum water temperature: 50°C (122°F) •... -
Page 23: Changing Gearbox Oil
11.4. Changing gearbox oil The oil in the gearbox should be changed periodically, see maintenance schedule (11.1), proceed as follows: 1. For a few minutes, let the machine run above the ground so that the oil becomes warm. 2. Stop the machine and switch off the tractor. Switch off the tractor’s engine and PTO before descending. -
Page 24: Probleemanalyse
PROBLEEMANALYSE Problem Possible cause Solution Machine vibrates PTO shafts do not align Change the length of the toplink until the shafts align. Wear & tear Check the drive system and rotor. Let machine run for a longer period. Material does not get Inlet is blocked Remove material from the inlet mesh.
Need help?
Do you have a question about the Verti-Air 7 and is the answer not in the manual?
Questions and answers