Table of Contents
Advertisement
Quick Links
User Manual and Parts
Book of the
Verti-Comb
Serial number:
Translation of the original operating
instructions
ATTENTION:
IT IS OF THE UTMOST IMPORTANCE TO READ THIS USER MANUAL
CAREFULLY PRIOR TO USING THE VERTI-COMB IN ORDER TO USE THE
MACHINE SAFELY AND TO OBTAIN THE BEST RESULTS.
1334 English 942.120.200
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Redexim Verti-Comb Series
Summary of Contents for Redexim Verti-Comb Series
- Page 1 User Manual and Parts Book of the Verti-Comb Serial number: Translation of the original operating instructions ATTENTION: IT IS OF THE UTMOST IMPORTANCE TO READ THIS USER MANUAL CAREFULLY PRIOR TO USING THE VERTI-COMB IN ORDER TO USE THE MACHINE SAFELY AND TO OBTAIN THE BEST RESULTS. 1334 English 942.120.200...
-
Page 2: Warranty Conditions
FOREWORD Congratulations on your Verti-Comb purchase! For safe and long-lasting operation of this Verti-Comb, it is necessary to read and to understand this user manual. It is impossible to work safely with this machine without complete knowledge of its content. The Verti-Comb is not a machine that works independently. -
Page 3: Safety Instructions
! SAFETY INSTRUCTIONS ! The Verti-Comb is designed for safe use. This can only be achieved if you completely follow the safety instructions described in this manual. Read and understand the manual before (Figure 1) you start using the Verti-Comb. If the machine is not used as described in this manual, this can result in injuries and/or damage Figure 1... - Page 4 If modifications to the Verti-Comb have been made, then the current CE marking is cancelled. The person that has made these modifications has to apply for a new CE marking himself. Check the Verti-Comb for loose bolts, nuts and components before every operation. If present, check the hydraulic pipelines regularly and replace these when the hydraulic pipelines are damaged or appear old.
- Page 5 Only authorised technical personnel may carry out repairs to the Verti-Comb. Keep a record of the repair activities. 5. The general applicable health & safety (Dutch: ARBO) regulations must also be followed in addition to the instructions in this user manual. Relevant traffic regulations also apply in case of using public roads.
- Page 6 Pay attention to the permitted lifting capacity of the towing vehicle. Dress appropriately. Wear sturdy shoes with steel toecaps, long trousers and tie up long hair. Do not wear loose clothing. Figure 5 7. Location of the safety stickers (Figure 5)
-
Page 7: Table Of Contents
TABLE OF CONTENTS WARRANTY CONDITIONS ................... 2 REGISTRATION CARD ..................2 SAFETY INSTRUCTIONS ..................3 TECHNICAL DATA ................... 8 FIRST INSTALLATION – TAKING THE MACHINE OFF THE PALLET .. 9 ATTACHING IT TO THE TRACTOR ............10 TRANSPORTING THE VERTI-COMB .............11 DRIVING SPEED ..................11 OPERATING THE VERTI-COMB .............12 START/STOP PROCEDURE ..............12... -
Page 8: Technical Data
TECHNICAL DATA Model Verti-Comb 1800 Verti-Comb 400 Working width 1.8 m (70.9”) only the middle 4.0 m (157.5”) section Working depth Surface treatment Surface treatment Speed Maximum 12 km/h (7.5 mph) Maximum 12 km/h (7.5 mph) Weight of basic machine 150 kg (331 lbs) 250 kg (551 lbs) Weight of basic machine... -
Page 9: First Installation - Taking The Machine Off The Pallet
FIRST INSTALLATION – TAKING THE MACHINE OFF THE PALLET Figure 6 To remove the pallet and to place the machine horizontally on the ground, you take the following steps (see Figure 6) !! NEVER CRAWL UNDER THE MACHINE !! 1. Attach a cable to lifting point (1) and to the frame of the machine (2). Make sure that the cable/crane/lift can hoist minimum 1,000 kg (2205 lbs). -
Page 10: Attaching It To The Tractor
ATTACHING IT TO THE TRACTOR Checking procedure before starting to attach the Verti-Comb: Check the Verti-Comb for visually discernable damage and repair this if safe operation of the machine is no longer guaranteed. Check whether all the nuts and bolts are tight. ... -
Page 11: Transporting The Verti-Comb
Connect the top rod (3) to the frame with the pin (2); secure the pin (2) with the supplied securing pin. Turn the top rod inwards so that it becomes pressurized. !! Make sure that all the securing pins are locked !! Start the tractor and lift the Verti-Comb off the ground. -
Page 12: Operating The Verti-Comb
OPERATING THE VERTI-COMB Before using the Verti-Comb in a location, you should check the following items: Are there loose objects in the field? First remove these objects. Are there slopes? The maximum slope is 20 degrees for this machine. Is there danger of flying objects (e.g., balls) that distract the attention of the driver? If so, the Verti-Comb CANNOT be used. -
Page 13: Disconnecting The Verti-Comb
Stopping occurs as follows: 1. Lower the speed and lift the machine from the ground. 2. Lift the machine completely and drive to the next location. DISCONNECTING THE VERTI-COMB Figure 10 The machine can be disconnected in the following manner: (see Figure 10) !! Make sure that the tractor is blocked well and cannot move on its own accord !! -
Page 14: Eu Declaration
10.0 EU DECLARATION We – Redexim BV, Utrechtseweg 127, 3702 AC Zeist, Holland – declare entirely under our own responsibility that the product VERTI-COMB WITH MACHINE NUMBER AS INDICATED ON THE MACHINE AND IN THIS MANUAL, to which this declaration relates is according to the stipulation of the 2006/42/EC directive for machines. -
Page 15: Optional: Set Of Wheels With Towing Hook
12.0 OPTIONAL: SET OF WHEELS WITH TOWING HOOK The Verti-Comb is also available including a set of wheels (optional). (Figure 11) This set can be mounted at the inside of the machine. The set of wheels is used in combination with a towing hook when another pulling vehicle is used instead of a tractor. -
Page 16: Optional: Rake Section
13.0 OPTIONAL: RAKE SECTION The Verti-Comb is also available including a rake section (optional). (Figure 12) This section can be mounted at the front side or the backside of the machine. The rake section can be used to rake (loosen) any material that is stuck. Figure 12... -
Page 17: Optional: Magnet Section
14.0 OPTIONAL: MAGNET SECTION The Verti-Comb is also available including a magnet section (optional). (Figure 13) This section can be mounted at the backside of the machine. While treating the surface, the magnet section can be used to remove steel particles from the surface. -
Page 18: Optional: Hydraulic Kit
15.0 OPTIONAL: HYDRAULIC KIT The Verti-Comb is also available including a hydraulic kit (optional). (Figure 14) This kit can be mounted on the backside of the machine by means of brackets. The hydraulic kit enables the automatic folding up or down of the side-panels and the automatic raising or lowering of the set of wheels.
Need help?
Do you have a question about the Verti-Comb Series and is the answer not in the manual?
Questions and answers