Advertisement
Quick Links
01865 767676
sales@unicol.com
www.unicol.com
ASMW1 & ASMW2
Screen Size: 50 - 75"
Guide Max. Weight: 60kg
Revised 07/06/24
*Please check model specific details before installing*
WARNING
Please carefully inspect the product before assembling. If you notice any apparent damage, call your
carrier claims agent and do not continue the installation until it has been reviewed. Please watch for pinch
points. Do not put your fingers between moveable parts. Do not tamper with or disassemble any spring
loaded parts. Before installing, make sure that the supporting surface will support five times the combined
load of the solution and the hardware. Never exceed the maximum load capacity. Please also layout all
components to ensure that you have all of the required parts before proceeding (see BOM list on following
page). Use of this product for anything other than its specified use may result in failure or personal
injury. This product is intended for indoor use only. We recommend using a qualified trades person for
installation. Use an assistant or lifting equipment to lift and position products.
For support, please call: +44 (0)1865 767676 or email: sales@unicol.com
Advertisement
Related Manuals for Unicol ASMW1
Summary of Contents for Unicol ASMW1
- Page 1 Use of this product for anything other than its specified use may result in failure or personal injury. This product is intended for indoor use only. We recommend using a qualified trades person for installation. Use an assistant or lifting equipment to lift and position products. For support, please call: +44 (0)1865 767676 or email: sales@unicol.com...
-
Page 2: Tools Required
ASMW1 Mount camera, video bar or speaker mounts are explained on Step 6 (page 4). Screen Mount Arms AV Tray(s) (2 for ASMW1, 1 for ASMW2) Mounting as Floor-to-Wall or Floor-to- Alternative ASMW2 Mount Ceiling is included on page 6. - Page 3 01865 767676 sales@unicol.com www.unicol.com STEP 1 IMPORTANT INFORMATION Using the wall mounting slots cut out on the back plate, determine where you want to install your When opening and closing the screen bracket from mount, mark it and fix into position.
- Page 4 01865 767676 sales@unicol.com www.unicol.com STEP 4 STEP 5 Place the AV trays back into position and gently Utilising the tag locks and fixing pack provided with push the bracket back to the closed position (see your mount, attach the arms to the back of your page 5 for other tray positioning options).
- Page 5 01865 767676 sales@unicol.com www.unicol.com STEP 8 STEP 9 Once centered, ensure the bottom screws are not Push the mount back until it clicks closed. Place the screwed tight and screw down the top screws to pull cords back into their resting slots and lock the level the screen.
- Page 6 01865 767676 sales@unicol.com www.unicol.com FLOOR-TO-CEILING / FLOOR-TO-WALL STEP 1 FLOOR-TO-CEILING / FLOOR-TO-WALL STEP 2 Floor-to-Ceiling Place the Accession mount on a table or flat surface. Install your columns as per your Holding the AV trays at the bottom, push them up choice of floor plate and ceiling plate.
- Page 7 01865 767676 sales@unicol.com www.unicol.com ASMW1 TECHNICAL DRAWING ASMW2 TECHNICAL DRAWING Revised 07/06/24...
- Page 8 Any Questions? +44 (0)1865 767676 sales@unicol.com unicol.com/instructions...
Need help?
Do you have a question about the ASMW1 and is the answer not in the manual?
Questions and answers