Advertisement
Quick Links
01865 767676
sales@unicol.com
www.unicol.com
AVMT & AVMW
AVMT
AVMW
Screen Size: 33-100"
Guide Max. Weight: 150kg
Revised 15/12/21
*Please check model specific details before installing*
WARNING
Please carefully inspect the product before assembling. If you notice any apparent damage, call your
carrier claims agent and do not continue the installation until it has been reviewed. Please watch for
pinch points. Do not put your fingers between moveable parts. Do not tamper with or disassemble any
spring loaded parts. Before installing, make sure that the supporting surface will support five times the
combined load of the solution and the hardware. Never exceed the maximum load capacity. Please also
layout all components to ensure that you have all of the required parts before proceeding (see BOM list
on following page). Use of this product for anything other than its specified use may result in failure or
personal injury. This product is intended for indoor use only. We recommend using a qualified trades
person for installation. Use an assistant or lifting equipment to lift and position products.
For support, please call: +44 (0)1865 767676 or email: sales@unicol.com
Advertisement
Related Manuals for Unicol AVMT
Summary of Contents for Unicol AVMT
- Page 1 This product is intended for indoor use only. We recommend using a qualified trades person for installation. Use an assistant or lifting equipment to lift and position products. For support, please call: +44 (0)1865 767676 or email: sales@unicol.com...
-
Page 2: Tools Required
3/16 Allen Key Pozidrive Screwdriver 17mm Spanner COMPONENTS DESCRIPTION Trolley Base (AVMT only) PowaLift Module PZX Screen Mount - Back Plate PZX Screen Mount - Mounting Arms Remote Control Manual Operating Switch & cable Top & Bottom Fixings (AVWM only) Wall Fixing Brackets (AVWM only) PZX9 Converter Plate (71 - 100”... - Page 3 01865 767676 sales@unicol.com www.unicol.com AVMT – TROLLEY AVMT – STEP 2 AVMT – STEP 1 Remove the 8 x M6 x 16 socket button head Place trolley base on a flat surface and apply screws and remove the top cable cover to gain brakes by pressing down levers on each castor.
-
Page 4: Lift Operation
01865 767676 sales@unicol.com www.unicol.com AVMT – STEP 5 AVMT – STEP 6 Using another team member, lift the screen up and With the screen fitted, cable it up routing through gradually offer it up to the back plate. Gently tilting... - Page 5 When using a PZX1 or PZX3 for 33-70” screens, ‘Connect’. Continue to follow the instructions on remove rear covers and follow AVMT Steps 2, 3 & 4. the App to operate the unit. When using a PZX9 for 71-100” screens, remove rear covers and follow AVMT Steps 2 &...
- Page 6 When using a PZX1 or PZX3 for 33-70” screens, base and fix wall plate to wall (fixings not supplied). remove rear covers and follow AVMT Steps 2, 3 & 4. Tighten all screws in top and base. When using a PZX9 for 71 - 100” screens, remove rear covers and follow AVMT Steps 2 &...
- Page 7 (fixings not supplied). Tighten all screws in top and bottom brackets. Follow Steps 5,7 & 8 of AVMT instructions to complete installation. AVML7 - Platform (OPTIONAL) STEP 1 (OPTIONAL) STEP 2 (OPTIONAL) Remove the 4 x screws that hold the front clamping The Platform can be adjusted in all planes.