D-Link D DMP-220 DMP-220 Quick Install Manual
D-Link D DMP-220 DMP-220 Quick Install Manual

D-Link D DMP-220 DMP-220 Quick Install Manual

Portable mp3 player fort windows

Advertisement

Review Package Contents

Make sure that the package contains the following items. If any items are
missing, contact the reseller.
§ DMP-210/220 Player
§ Drivers and Software on CD-ROM
§ Earphone
§ USB Cable
§ User's Manual
§ Quick Install Guide
§ 1 x AA Alkaline Battery

Driver and Manager Installation

The driver enables the Manager software to communicate with the
DMP-210/220. When you install the Manager software, the drivers will
automatically be copied to the Windows system directory.
!
Note:
Install the Manager program before connecting your
DMP-210/220 to the USB port. The Manager program
loads the appropriate drivers necessary to complete the
installation. If the device is connected before installing the
Manager program, disconnect the DMP-210/220 from the
USB port, exit the "Add New Hardware Wizard" screen and
restart your computer.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the D DMP-220 DMP-220 and is the answer not in the manual?

Questions and answers

Summary of Contents for D-Link D DMP-220 DMP-220

  • Page 1 Review Package Contents Make sure that the package contains the following items. If any items are missing, contact the reseller. § DMP-210/220 Player § Drivers and Software on CD-ROM § Earphone § USB Cable § User’s Manual § Quick Install Guide §...
  • Page 2 Driver and Manager Installation § Make sure your computer is turned on. § Insert the DMP-210/220 Driver CD into the CD-ROM. § The Autorun screen will appear automatically. § Click on the button labeled “Install Manager” Note: If the Autorun screen does not appear, click on Start and select Run.
  • Page 3 Connect the DMP-210/220 to the PC § Open the battery compartment and insert the battery supplied with this package. Be sure to match the correct polarity. § Press the Play button to turn on the DMP-210/220. The DMP-210/220 must be powered on before connecting to the computer via the USB port.
  • Page 4 Downloading Music to the DMP-210/220 § Start the Manager program by clicking on: Start > Programs > D-Link MP3 > D-Link MP3 Manager § The following screen will appear § On the Left side, select the Drive and Folder of your MP3 files.
  • Page 5 Downloading Music to the DMP-210/220 § You may also upgrade the available memory by inserting a SmartMedia Card. SmartMedia Cards are available at most electronic stores. Refer to the User’s Manual for more information. § When using SmartMedia Cards, you will need to click the button to download music to the SmartMedia memory.
  • Page 6 Playing Music on the DMP-210/220 Please refer to the following illustration for feature and button location. 1. Connect the supplied earphones to the earphone 2. Press the Play/Pause button to start playback. Playback starts from the MP3 file that you played the last time you used the DMP-210/220.
  • Page 7: Troubleshooting

    Troubleshooting PROBLEM POSSIBLE CAUSE No power Unit has not been turned on. Press the Play button to turn the power No battery is inserted. Battery is dead. I can’t hear Unit has not been turned on. Press the Play button to turn the power any music Volume is set too low.
  • Page 8: Technical Support

    D-Link provides free technical support for customers within the United States throughout the warranty period of this product. U.S. customers can contact D-Link Technical Support through our web site, e- mail or by phone. D-Link Technical Support over Telephone : (949) 790-5290 6 a.m.

This manual is also suitable for:

Dmp-210Dmp-220

Table of Contents