Advertisement
Quick Links
BEFORE BEGINNING YOUR INSTALLATION
Read through the instruction guide before getting started with the installation. Professional installation is recommended for
this product.
CONTENTS
150 PSI Air Compressor (Black)
1/4" NPT Stainless Steel Braided Leader Hose with Check Valve
30A In-line Fuse with Waterproof Holder
Mounting Hardware
The specific voltage requirement for this compressor is 12 volt DC, therefore installation must be done to a DC
power source of 12 volts.
SAFETY INSTRUCTIONS
Do not attempt to disassemble, repair or customize this product.
Avoid setting up any parts of this product where there is a risk of falling off or risk of coming in contact with water.
Avoid reaching out to touch or pick up any fallen or water submerged parts.
Never leave this product unattended during use.
Intended for use by adults only.
During and immediately after use, avoid touching any part of the compressor with bare hands as it is very hot
during such periods.
Avoid use of product near flames, explosive materials, aerosol products or oxygen devices.
Be sure to pump nothing other than atmospheric air.
Air sprayer or nozzle should always be pointed away from any part of the body.
PAGE 1 of 4
VXC8701B
INSTALLATION GUIDE
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Vixen Horns VXC8701B
Summary of Contents for Vixen Horns VXC8701B
- Page 1 VXC8701B INSTALLATION GUIDE BEFORE BEGINNING YOUR INSTALLATION Read through the instruction guide before getting started with the installation. Professional installation is recommended for this product. CONTENTS 150 PSI Air Compressor (Black) 1/4" NPT Stainless Steel Braided Leader Hose with Check Valve ...
- Page 2 VXC8701B INSTALLATION GUIDE The compressor has Thermal Overload Protection, if this protection activates, cut off the source of power and let the unit cool down for about 30 minutes. This will reset the system and allow you to safely resume use of the air compressor.
- Page 3 VXC8701B INSTALLATION GUIDE ELECTRICAL CONNECTION COMPRESSOR The red wire of the compressor should be connected to (+) 12-volt power source. IMPORTANT: To prevent the compressor from over running and possible damage due to an air leak, connect the compressor’s red wire to a power source in the vehicle that only gets power when the vehicle’s ignition is on.
- Page 4 VXC8701B INSTALLATION GUIDE MAINTENANCE Make sure that electrical and fitting connections are regularly inspected, cleaned and tightened when needed. Make sure mounting screws are regularly tightened if needed. Compressor features a washable air filter which should be cleaned using any mild form of liquid soap every two months if it gets dusty.
Need help?
Do you have a question about the VXC8701B and is the answer not in the manual?
Questions and answers