Subscribe to Our Youtube Channel
Related Manuals for YitaHome TLCFLS-2015
Summary of Contents for YitaHome TLCFLS-2015
- Page 1 ASSEMBLY INSTRUCTIONS TLCFLS-2012 JBT-V1 TLCFLS-2014 TLCFLS-2015 TLCFLS-2013 CEILING FAN...
-
Page 2: Before You Start
ASSEMBLY INSTRUCTION ASSEMBLY INSTRUCTION Important Safety Instructions BEFORE YOU START Tools and Materials Required 1.Read all instructions and safety information before installing your new fan. Contact a licensed electrician if Review the accompanying assembly diagrams. you are not good at performing electrical work. -
Page 3: Installing The Fan
SCREWS BAG INSTALLING THE FAN Tools Required: Phillips screwdriver, a pair of pliers, straight slot screwdriver, adjustable wrench, step ladder, and wire cutters. Item Item Qty. Qty. Reference Image Reference Image INSTALLING THE FLUSH MOUNT FAN LIGHT ×4 ×2 1.Securely attach the hanging bracket to the ceiling joist using the lag bolt, flat ST5x35 Screw... - Page 4 ASSEMBLY INSTRUCTION ASSEMBLY INSTRUCTION 3.Connections 4.Hang the motor assembly onto the two pre-installed hanging bracket’ s screws, then install the other two hanging bracket’ s screws. (Figure 8) To avoid possible electrical shock, make sure the electricity is turned off at the main fuse box before wiring. It is critical that the clevis screw in the downrod support is properly installed and the installed screws are tightened.
-
Page 5: Remote Control Setting And Operation
ASSEMBLY INSTRUCTION ASSEMBLY INSTRUCTION REMOTE CONTROL SETTING AND OPERATION 1). Connect the LED lamp’ s wires to the fan motor's wires. 2). Install the LED lamp on the motor with three screws. (Figure 9) 6.Carefully install the glass lamp shade into the main body and turn clockwise to lock. - Page 6 OPERATIONS OF BUTTON WALL CONTROL AC86/CK86(DC) After the power switch is on, you can hear the “beep” sound, and must press the ”Light ON/OFF” button on the wall control immediately. The wall control pairing is successful when you hear a long “beep” sound. Tips: Please ensure that you follow the above steps and complete the entire process within 30 seconds after the power is on.
-
Page 7: Important Reminders
IMPORTANT:PAIRING BETWEEN REMOTE AND RECEIVER IMPORTANT REMINDERS 1.Note: The receiver must be correctly installed in the fan’s hanging bracket. After the power switch is on, you can hear the “beep” sound, and must press the ”Light ON/OFF” button on the wall control immediately. The wall 2.When the transmitter cannot control the receiver, please check the control pairing is successful battery level and check if similar remote controls your fan nearby... -
Page 8: Maintenance
BALANCING FAN / WOBBLING TROUBLE SHOOTING Tips Please note that all ceiling fans are not the same, even in the same 1.If your fan automatically operates after installing and powering on, it is because your fan has memorized the previous factory setting. model—some may move more or less than others.
Need help?
Do you have a question about the TLCFLS-2015 and is the answer not in the manual?
Questions and answers