HIKVISION Ultra DS-2DF8442IXS-AEL(T5) C User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Security Camera
  5. DS-2DF8442IXS-AEL(T5)
  6. User manual
HIKVISION Ultra DS-2DF8442IXS-AEL(T5) C User Manual

HIKVISION Ultra DS-2DF8442IXS-AEL(T5) C User Manual

Network speed dome
Hide thumbs Also See for Ultra DS-2DF8442IXS-AEL(T5) C:
Table of Contents

Advertisement

Quick Links

Download this manual
Network Speed Dome
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Ultra DS-2DF8442IXS-AEL(T5) C and is the answer not in the manual?

Questions and answers

Related Manuals for HIKVISION Ultra DS-2DF8442IXS-AEL(T5) C

Summary of Contents for HIKVISION Ultra DS-2DF8442IXS-AEL(T5) C

  • Page 1 Network Speed Dome User Manual...
  • Page 2 ‰‰‰‰r‰b‰ti‰n‰ use and/or processing of video data takes place. With the philosophy of "Technology for the Good", Hikvision requests that every end user of video technology and video products shall comply with all the applicable laws and r‰‰‰‰‰ti‰n‰‰ as well as ethical customs, aiming to jointly create a b‰‰〷‰r community.
  • Page 3 Network Speed Dome User Manual control, ‰‰‰‰ctin‰ a suitable network environment (the Internet or Intranet) where video products are connected, establishing and constantly ‰‰tim‰‰‰n‰ network security. Video products have made great c‰n‰r‰b‰ti‰n‰ to the improvement of social security around the ●...
  • Page 4 WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,...
  • Page 5 Network Speed Dome User Manual DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES.

  • Page 6: Table Of Contents

    Network Speed Dome User Manual Contents Chapter 1 Overview ........................1 1.1 Product ‰n‰r‰‰‰cti‰n ......................1 1.2 Key ‰‰ncti‰n .......................... 1 1.3 System Requirement ......................2 Chapter 2 Device ‰ctiv‰ti‰n and Accessing ................. 3 2.1 ‰ctiv‰‰‰ Device ........................3 2.1.1 ‰ctiv‰‰‰ Device via Web Browser .................. 3 2.1.2 ‰ctiv‰‰‰...
  • Page 7 Network Speed Dome User Manual 3.4.4 Face ‰‰c‰‰n‰ti‰n Algorithm Parameters ..............15 3.5 Face Comparison ........................17 3.5.1 Set Face Picture Library ....................17 3.5.2 Set Face Picture Comparison ..................19 3.5.3 View Face Comparison Result ..................20 3.6 Capture Target with Feature ....................20 3.6.1 Set ‰‰‰‰cti‰n Rule ......................
  • Page 8 Network Speed Dome User Manual 4.6 Set Home ‰‰‰‰ti‰n ........................ 44 4.7 Set Park ‰cti‰n ........................44 4.7.1 Set One-Touch Park ..................... 44 4.8 Set Scheduled Tasks ......................45 4.9 Set Power ‰‰〶 Memory ......................45 4.10 Set PTZ Priority ........................45 4.11 Set Privacy Mask ........................
  • Page 9 Network Speed Dome User Manual 5.2 Set Transmission Parameters ....................53 Chapter 6 Video and Audio ....................... 55 6.1 Video ‰‰〷呠n‰‰ ........................55 6.1.1 Stream Type ........................ 55 6.1.2 Video Type ........................55 6.1.3 ‰‰‰‰‰‰ti‰n ........................55 6.1.4 Bitrate Type and Max. Bitrate ..................56 6.1.5 Video Quality ......................
  • Page 10 Network Speed Dome User Manual 6.8 OSD ............................66 Chapter 7 Video Recording and Picture Capture ................ 67 7.1 Storage ‰‰〷呠n‰‰ ........................67 7.1.1 Memory Card ......................67 7.1.2 Set FTP ........................69 7.1.3 Set NAS ........................70 7.1.4 eMMC ‰r‰‰‰cti‰n ......................71 7.1.5 Set Cloud Storage ......................
  • Page 11 Network Speed Dome User Manual 8.2.4 Set Region ‰x‰tin‰ ‰‰‰‰cti‰n ..................87 8.2.5 Set Object Removal ‰‰‰‰cti‰n ..................89 8.2.6 Set ‰n‰‰〷‰n‰‰‰ Baggage ‰‰‰‰cti‰n ................91 8.2.7 Set Tracking Parameters ....................92 8.2.8 Overlay and Capture ....................93 Chapter 9 Arming Schedule and Alarm Linkage ................. 94 9.1 Set Arming Schedule ......................
  • Page 12 Network Speed Dome User Manual 10.6.2 Set Up Hik-Connect ....................106 10.6.3 Add Camera to Hik-Connect ..................107 10.7 HTTP(S) ..........................107 10.8 M‰‰tic‰‰‰ .......................... 108 10.8.1 M‰‰tic‰‰‰ Discovery ....................108 10.9 RTSP ..........................109 10.10 Set SRTP ......................... 109 10.10.1 M‰‰tic‰‰‰...
  • Page 13 Network Speed Dome User Manual 11.11 Time and Date ........................ 117 11.11.1 Synchronize Time Manually .................. 117 11.11.2 Synchronize Time by Satellite ................117 11.11.3 Set NTP Server ...................... 117 11.11.4 Set DST ........................118 11.12 Set RS-485 ........................118 11.13 Security ..........................

  • Page 14: Chapter 1 Overview

    Network Speed Dome User Manual Chapter 1 Overview 1.1 Product ‰n‰‰‰‰‰cti‰n The F Series Network Speed Dome is an ‰n‰‰‰r‰ti‰n of HD camera, PTZ m‰ti‰n control module, and video content analysis algorithms, ideal for remote monitoring. The device has basic PTZ ‰‰ncti‰n‰‰ such as presets, scans, and target tracking, and smart ‰‰ncti‰n‰‰...

  • Page 15: System Requirement

    Network Speed Dome User Manual Vehicle Arming The device detects the armed vehicle (license plates) in the monitoring scene. When the wanted vehicles are found, the device triggers alarms, and starts tracking and capturing the target. The r‰‰‰‰tim‰ target ‰‰c‰ti‰n and other related ‰n‰‰rm‰ti‰n are uploaded during tracking if properly c‰n‰〶‰‰r‰‰‰...

  • Page 16: Chapter 2 Device ‰Ctiv‰Ti‰N And Accessing

    Network Speed Dome User Manual Chapter 2 Device ‰ctiv‰ti‰n and Accessing To protect the security and privacy of the user account and data, you should set a login password to ‰ctiv‰‰‰ the device when access the device via network. Note Refer to the user manual of the ‰‰ftw‰r‰...

  • Page 17: Ctiv‰‰‰ Via Sadp

    Network Speed Dome User Manual 2.1.2 ‰ctiv‰‰‰ via SADP SADP is a tool to detect, ‰ctiv‰‰‰ and modify the IP address of the device over the LAN. Before You Start Get the SADP ‰‰ftw‰r‰ from the supplied disk or the ‰〶噠c‰‰‰ website ‰‰〷‰‰‰‰ ●...

  • Page 18: Access Device Via Web Browser

    Network Speed Dome User Manual 2) Change the device IP address to the same subnet as your computer by either modifying the IP address manually or checking Enable DHCP. 3) Input the admin password and click Modify to ‰ctiv‰‰‰ your IP address m‰‰‰‰〶c‰ti‰n‰ 2.2 Access Device via Web Browser Before You Start Check the system requirement to c‰n‰〶rm that the ‰‰‰r‰tin‰...

  • Page 19: Admin Password Recovery

    Network Speed Dome User Manual ‰‰‰‰‰tin‰ System Web Browser ‰‰‰‰‰ti‰n Windows Internet Explorer 10+ Follow pop-up prompts to ● Google Chrome 57 and complete plug-in ‰n‰‰‰‰‰‰ti‰n‰ ● earlier version Mozilla Firefox 52 and earlier ● version Google Chrome 57+ Click to download and install ●...

  • Page 20: Illegal Login Lock

    Network Speed Dome User Manual You can click Forget Password and answer the security q‰‰‰ti‰n to reset the admin password when access the device via browser. Email You can set the account security during the ‰ctiv‰ti‰n‰ Or you can go to C‰n‰〶‰‰‰‰ti‰n → System → User Management , click Account Security ‰‰〷呠n‰‰, input your email address to receive the v‰r‰‰〶c‰ti‰n code during the recovering ‰‰‰r‰ti‰n process.

  • Page 21: Chapter 3 Smart ‰‰Ncti‰N

    Network Speed Dome User Manual Chapter 3 Smart ‰‰ncti‰n 3.1 Allocate VCA Resource VCA resource ‰‰〶‰r‰ you ‰‰ti‰n‰ to enable certain VCA ‰‰ncti‰n‰ according to actual needs. It helps allocate more resources to the desired ‰‰ncti‰n‰‰ Steps 1. Click VCA on the ‰‰ft tab. 2.

  • Page 22: Set Camera Info

    Network Speed Dome User Manual 3.2.1 Set Camera Info Customize ‰‰‰c‰‰〶c ‰n‰‰rm‰ti‰n for the device. It may help ‰‰‰nti‰y a certain device when m‰‰ti‰‰‰ devices are under management. Go to VCA → Set ‰‰‰‰‰c‰ti‰n → General ‰‰〷呠n‰‰ → Camera Info. to set Camera No. and Camera Info.
  • Page 23 Network Speed Dome User Manual 2) Adjust the pan, ti‰‰‰ and zoom ‰‰‰‰ti‰n to obtain the target scene. 3) Select the Total Number of the Lanes according to the actual lane number you want to monitor in the scene. Yellow lane lines and a blue ‰‰‰‰cti‰n line are displayed on live image. 4) Click and drag the lane lines or the endpoints to set the ‰‰‰‰ti‰n‰...

  • Page 24: Picture ‰‰〷呠N

    Network Speed Dome User Manual 3.3.2 Picture ‰‰〷呠n‰‰ Captured vehicle pictures are uploaded. Picture size, quality and overlay ‰n‰‰rm‰ti‰n are c‰n‰〶‰‰r‰b‰‰‰ Go to VCA → Set ‰‰‰‰‰c‰ti‰n → Road ‰‰‰〶噠c → Advanced ‰‰〷呠n‰‰ → Overlay & Capture to start. Picture Type Select one or more picture types to upload.

  • Page 25: Set Armed License Plates

    Network Speed Dome User Manual 3.3.3 Set Armed License Plates You can specify the vehicles you want to arm by adding their license plates to the blocklist or allowlist. Steps 1. Go to VCA → Set ‰‰‰‰‰c‰ti‰n → Road ‰‰‰〶噠c → Advanced ‰‰〷呠n‰‰ → Blocklist & Allowlist . 2.
  • Page 26 Network Speed Dome User Manual Steps 1. Go to VCA → Set ‰‰‰‰‰c‰ti‰n → Face Comparison → Face R‰c‰‰n‰ti‰n → Rule . 2. Check Enable. 3. Select a c‰n‰〶‰‰r‰ti‰n mode. Normal One ‰‰‰‰cti‰n scene is allowed to set. The device captures face in the scene in set arming schedule.

  • Page 27: Operate Manual Face Capture

    Network Speed Dome User Manual Normally, the PTZ control is ‰‰‰‰m‰tic‰‰‰y locked when you enter the c‰n‰〶‰‰r‰ti‰n interface. You can manually resume the lock when the countdown is over. 2. Set ‰‰‰‰cti‰n scenes and ‰‰‰‰cti‰n areas. 1) Select a ‰‰‰‰cti‰n scene. 2) Adjust the live image to a desired scene.

  • Page 28: Overlay And Capture

    Network Speed Dome User Manual 3.4.3 Overlay and Capture Choose to c‰n‰〶‰‰r‰ capture parameters and the ‰n‰‰rm‰ti‰n you want to display on stream and picture. Display VCA Info. on Stream Display smart ‰n‰‰rm‰ti‰n on stream, including the target and rules ‰n‰‰rm‰ti‰n‰ Display Target Info.
  • Page 29 Network Speed Dome User Manual Capture Parameters Best Shot The device captures the target picture with the highest score ‰ft‰r ‰‰〷呠n‰ the parameters. Capture Threshold It refers for the quality of face to trigger capture and alarm. Higher value means b‰‰〷‰r quality should be met to trigger capture and alarm.

  • Page 30: Face Comparison

    Network Speed Dome User Manual Limited The device captures the target face according to the set tim‰‰‰ Face Exposure Enable the ‰‰ncti‰n‰ and the device ‰‰‰‰m‰tic‰‰‰y adjusts exposure level when human faces appear in the scene. Reference Brightness It refers to the reference brightness of a face in the face exposure mode. If a face in the actual scene is brighter than the set reference brightness, the device lower the exposure level.
  • Page 31 Network Speed Dome User Manual Steps 1. Go to VCA → Face Comparison → Set ‰‰‰‰‰c‰ti‰n → General ‰‰〷呠n‰‰ → Face Picture Library . 2. Create a face picture library. 1) Click to add a face picture library. 2) Input library name, threshold and remarks. Threshold Face similarity higher than the set threshold triggers face picture comparison alarm uploading.

  • Page 32: Set Face Picture Comparison

    Network Speed Dome User Manual Batch Modeling Select a face picture library, and click Batch Modeling. 6. ‰‰ti‰n‰‰‰ Repeat to create more face libraries. 3.5.2 Set Face Picture Comparison The ‰‰ncti‰n compares captured pictures with face pictures in the library and outputs comparison result.

  • Page 33: View Face Comparison Result

    Network Speed Dome User Manual 7. Click to set linkage method for the selected face library. Set linkage method. See Linkage Method ‰‰〷呠n‰‰ 3.5.3 View Face Comparison Result Steps 1. Go to ‰‰‰‰‰c‰ti‰n Display → Face Picture Comparison ‰‰‰ti‰tic‰ . 2.

  • Page 34: Overlay And Capture

    Network Speed Dome User Manual What to do next Go to Picture to search and view the captured pictures. Go to Smart Display to see currently captured target pictures. 3.6.2 Overlay and Capture Choose to c‰n‰〶‰‰r‰ capture parameters and the ‰n‰‰rm‰ti‰n you want to display on stream and picture.
  • Page 35 Network Speed Dome User Manual Capture Parameters Best Shot The device captures the target picture with the highest score ‰ft‰r ‰‰〷呠n‰ the parameters. Capture Threshold It refers for the quality of face to trigger capture and alarm. Higher value means b‰‰〷‰r quality should be met to trigger capture and alarm.

  • Page 36: Person Arming

    Network Speed Dome User Manual Limited The device captures the target face according to the set tim‰‰‰ Face Exposure Enable the ‰‰ncti‰n‰ and the device ‰‰‰‰m‰tic‰‰‰y adjusts exposure level when human faces appear in the scene. Reference Brightness It refers to the reference brightness of a face in the face exposure mode. If a face in the actual scene is brighter than the set reference brightness, the device lower the exposure level.

  • Page 37: Device Auto Person Arming

    Network Speed Dome User Manual Manual Person Arming The device tracks and captures the manually selected target and uploads the related data. Device Auto Person The device tracks and captures targets ‰‰‰‰m‰tic‰‰‰y according to the Arming ‰‰〷呠n‰ rule. 3.7.1 Device Auto Person Arming You need to set face picture libraries and auto person arming rules to realize device auto person arming.
  • Page 38 Network Speed Dome User Manual Tuning Mode The mode is only for the professional users. Tracking Capture Check to enable the device to capture the targets during the tracking. Some capture parameters are allowed to adjust. Face Capture Threshold It refers for the quality of face to trigger capture and alarm. Higher value means b‰‰〷‰r quality should be met to trigger capture and alarm.

  • Page 39: Manual Person Arming

    Network Speed Dome User Manual The validity is an internal parameter that helps judge whether the PTZ channel should lower the tracking speed or not. This parameter is the w‰‰tin‰ tim‰ level before the device lowers the tracking speed when the validity is low. Larger value means longer w‰‰tin‰ tim‰‰ Tracking ‰‰‰‰ti‰n When you set the Tracking ‰‰‰‰ti‰n as 0, the device keeps tracking the target ‰nti‰...
  • Page 40 Network Speed Dome User Manual Normal One ‰‰‰‰cti‰n scene is allowed to set. The device captures targets in the scene in the set arming schedule. See Normal Mode ‰‰〷呠n‰‰ for details. Expert The device can patrol among the ‰‰‰‰cti‰n scenes and capture target images. ‰‰‰‰cti‰n scenes and patrol schedule should be set in advance.
  • Page 41 Network Speed Dome User Manual Advanced Parameters It is used to set the parameters of the algorithm library for b‰‰〷‰r ‰‰‰‰cti‰n performance. HMS Version It refers to the current algorithm version, which cannot be edited. Capture Parameters Best Shot The device captures the target picture with the highest score ‰ft‰r ‰‰〷呠n‰ the parameters. Capture Threshold It refers for the quality of face to trigger capture and alarm.

  • Page 42: Intelligent ‰R‰〶噠C Event (Its)

    Network Speed Dome User Manual It refers to the capture tim‰‰ a face will be captured during its stay in the c‰n‰〶‰‰r‰‰ area. Unlimited The device keeps capturing the target face, which exceeds the Quick Shot Threshold during the Max. Capture Interval. Limited The device captures the target face according to the set tim‰‰‰...

  • Page 43: Vehicle ‰‰‰‰Cti‰N

    Network Speed Dome User Manual Listening Server If the device uploads alarms in listening mode via our company's SDK, you should set the IP address and port for the listening server. When the network is disconnected, data is temporarily saved on the memory card. When the network c‰nn‰cti‰n is resumed, the device ‰‰‰‰m‰tic‰‰‰y uploads the saved data to the arming host, in which case, the arming host IP address is required.
  • Page 44 Network Speed Dome User Manual Steps 1. Go to VCA → Set ‰‰‰‰‰c‰ti‰n → ITS (Intelligent ‰‰‰n‰‰‰‰‰‰ti‰n System) → Close-up Rule ‰‰〷呠n‰‰ . 2. ‰‰ti‰n‰‰‰ Click to lock PTZ control to prevent the ‰n‰‰rr‰‰ti‰n from other PTZ related ‰cti‰n during c‰n‰〶‰‰r‰ti‰n‰ Normally, the PTZ control is ‰‰‰‰m‰tic‰‰‰y locked when you enter the c‰n‰〶‰‰r‰ti‰n interface.

  • Page 45: Its Linkage And Alarm

    Network Speed Dome User Manual Set ITS Arming Schedule The device ‰‰‰‰m‰tic‰‰‰y detects among m‰‰ti‰‰‰ scenes according to the arming schedule. Before You Start Set m‰‰ti‰‰‰ ‰‰‰‰cti‰n scenes. See Set ‰‰‰‰c‰〷‰n Scene for details. Steps 1. Go to VCA → Set ‰‰‰‰‰c‰ti‰n → ITS (Intelligent ‰‰‰n‰‰‰‰‰‰ti‰n System) → Close-up Scene Alarm Schedule .

  • Page 46: Vehicle Arming

    Network Speed Dome User Manual Upload Pictures Set the parameters for the device to ‰‰‰‰m‰tic‰‰‰y upload captured pictures to FTP server or other ‰‰‰tf‰rm‰‰ See Upload by FTP to upload captured pictures by FTP. See Upload by SDK or Set ISUP to upload captured pictures to ‰‰‰tf‰rm‰‰ Upload by FTP Upload the data of vehicle ‰‰‰‰cti‰n to an FTP server.
  • Page 47 Network Speed Dome User Manual Manual vehicle arming and ‰‰‰tf‰rm‰c‰n‰r‰‰‰‰‰ vehicle arming are supported, and manual vehicle arming has a higher priority. Manual Vehicle Arming The device tracks the target manually selected by user and uploads related ‰n‰‰rm‰ti‰n‰ ‰‰‰tf‰rm‰′ C ‰n‰r‰‰‰‰‰ The device receives orders from the ‰‰‰tf‰rm and performs arming tasks.

  • Page 48: Advanced ‰‰〷呠N

    Network Speed Dome User Manual View Arming Task Go to VCA → Set ‰‰‰‰‰c‰ti‰n → ITS (Intelligent ‰‰‰n‰‰‰‰‰‰ti‰n System) → Vehicle Arming → Arming Status to view the arming tasks sent from the ‰‰‰tf‰rm‰ The device performs a single task at one tim‰‰ If it receives m‰‰ti‰‰‰ tasks, former tasks are interrupted and the device performs the latest task.

  • Page 49: Display Alarm

    Network Speed Dome User Manual The validity is an internal parameter that helps judge whether the PTZ channel should lower the tracking speed or not. This parameter is the w‰‰tin‰ tim‰ level before the device lowers the tracking speed when the validity is low. Larger value means longer w‰‰tin‰ tim‰‰ Uploading Picture ‰‰〷呠n‰‰...
  • Page 50 Network Speed Dome User Manual Go to ‰‰‰‰‰c‰ti‰n Display → Display Alarm to view the r‰‰‰‰tim‰ images. Click to go back to ‰‰‰‰‰c‰ti‰n Display. Note To use this ‰‰ncti‰n‰ you should ‰〶r‰‰ enable and c‰n‰〶‰‰r‰ certain smart ‰‰ncti‰n‰‰ ● To use this ‰‰ncti‰n‰ your web browser version should be above IE11.0.9600.17843. ●...

  • Page 51: Chapter 4 Ptz

    Network Speed Dome User Manual Chapter 4 PTZ PTZ is an ‰bbr‰v‰‰ti‰n for pan, ti‰‰‰ and zoom. It means the movement ‰‰ti‰n‰ of the camera. 4.1 PTZ Control In live view interface, you can use the PTZ control b‰‰〷‰n‰ to control the device panning, ti‰tin‰‰ and zooming.
  • Page 52 Network Speed Dome User Manual C‰m‰‰tib‰‰ The control speed is same as Keyboard Control Speed. Pedestrian Choose Pedestrian when you monitor the pedestrians. Non-motor Vehicle Choose Non-motor Vehicle when you monitor the non-motor vehicles. Motor Vehicle Choose Motor Vehicle when you monitor the motor vehicles.

  • Page 53: Set Preset

    Network Speed Dome User Manual Iris When the image is too dark, click the b‰‰〷‰n to enlarge the iris. When the image is too bright, click the b‰‰〷‰n to stop down the iris. 4.2 Set Preset A preset is a ‰r‰‰‰‰〶n‰‰ image ‰‰‰‰ti‰n‰ For the ‰‰‰〶n‰‰ preset, you can call the preset No. to view the ‰‰‰‰ti‰n‰...

  • Page 54: Set Patrol Scan

    Network Speed Dome User Manual Preset No. ‰‰ncti‰n Preset No. ‰‰ncti‰n Auto ‰〶‰‰ Set manual limits Back to origin Save manual limits Call patrol 1 Remote reboot Call patrol 2 Call OSD menu Call patrol 3 Stop a scan Call patrol 4 Start random scan Day mode Start frame scan...

  • Page 55: Set One-Touch Patrol

    Network Speed Dome User Manual It is the ‰‰r‰ti‰n staying on one patrol point. Delete the presets in patrol. Adjust the preset order. Note A patrol can be c‰n‰〶‰‰r‰‰ with 32 presets at most, and 2 presets at least. 4. Click OK to ‰〶n‰‰‰ a patrol ‰‰〷呠n‰‰ 5.

  • Page 56: Set Limit

    Network Speed Dome User Manual Note Recording stops when the space for ‰‰‰〷‰rn scan is 0%. 5. Click to complete one ‰‰‰〷‰rn scan path ‰‰〷呠n‰‰‰ 6. Click to call ‰‰‰〷‰rn scan. Stop ‰‰‰〷‰rn scan. Reset ‰‰‰〷‰rn scan path. Delete the selected ‰‰‰〷‰rn scan. Note If you need to delete all the ‰‰‰〷‰rn scans, go to C‰n‰〶‰‰‰‰ti‰n →...

  • Page 57: Set Home ‰‰‰‰Ti‰N

    Network Speed Dome User Manual 4.6 Set Home ‰‰‰‰ti‰n Home ‰‰‰‰ti‰n refers to the r‰‰‰tiv‰ ‰n‰ti‰‰ ‰‰‰‰ti‰n of the device azimuth. You can set the home ‰‰‰‰ti‰n if you need to select one point in the scene as the base point. Steps 1.

  • Page 58: Set Scheduled Tasks

    Network Speed Dome User Manual 4.8 Set Scheduled Tasks You can set the device to perform a certain task during a certain period. Steps 1. Go to C‰n‰〶‰‰‰‰ti‰n → PTZ → Scheduled Tasks . 2. Check Enable. 3. Select the task type and set the period. For ‰‰〷呠n‰ the period, refer to Set Arming Schedule . 4.

  • Page 59: Set Privacy Mask

    Network Speed Dome User Manual It refers to the tim‰ interval of PTZ ‰‰‰r‰ti‰n controlled by ‰‰‰〶‰r‰n‰ signals. When the ‰‰‰r‰ti‰n with high priority is ‰〶n‰‰‰‰‰‰ the low priority signal controls the device ‰ft‰r the ‰‰〷呠n‰ interval. 3. Click Save. 4.11 Set Privacy Mask Privacy masks cover certain areas on the live image to protect personal privacy from being live viewed and recorded.

  • Page 60: Gps C‰‰‰Br‰Ti‰N

    Network Speed Dome User Manual Note More c‰‰‰br‰ti‰n points may increase c‰‰‰br‰ti‰n accuracy, but more focusing tim‰ is required. The default amount is recommended. 3. Select the scene to display the c‰‰‰br‰ti‰n line. A red line displays on live image. 4.

  • Page 61: Verify C‰‰‰Br‰Ti‰N

    Network Speed Dome User Manual 3) Click again. A green cross shows on the point. 4) Click Add and input the precise longitude and ‰‰ti‰‰‰‰ of the point. Note You must add at least 4 points, otherwise you cannot save the points. 5) Click Save.

  • Page 62: Set Manual Compass

    Network Speed Dome User Manual Steps 1. Go to C‰n‰〶‰‰‰‰ti‰n → System → System ‰‰〷呠n‰‰ → ‰‰c‰ti‰n . 2. Select a PT Mode. Manual Use a ‰‰r‰cti‰n ‰n‰‰c‰tin‰ device to determine the North at the device ‰‰c‰ti‰n‰ and set the North for the device. For details, see Set Manual Compass . 3.

  • Page 63: Chapter 5 Live View

    Network Speed Dome User Manual Chapter 5 Live View It introduces the live view parameters, ‰‰ncti‰n icons and transmission parameters ‰‰〷呠n‰‰‰ 5.1 Live View Parameters The supported ‰‰ncti‰n‰ vary depending on the model. 5.1.1 Start and Stop Live View Click Live View. Click to start live view.

  • Page 64: Start Digital Zoom

    Network Speed Dome User Manual 5.1.5 Start Digital Zoom It helps to see a detailed ‰n‰‰rm‰ti‰n of any region in the image. Steps 1. Click to enable the digital zoom. 2. In live view image, drag the mouse to select the desired region. 3.

  • Page 65: Light

    Network Speed Dome User Manual 5.1.9 Light Click to turn on or turn ‰‰〶 the illuminator. 5.1.10 Operate Wiper For the device that has a wiper, you can control the wiper via web browser. Note Wiper ‰‰‰r‰ti‰n and ‰‰〷呠n‰‰ vary on device models. Steps 1.

  • Page 66: Conduct 3D ‰‰‰‰Ti‰N‰N

    Network Speed Dome User Manual Note The ‰‰ncti‰n may not be supported by certain device models. Steps 1. Click on the toolbar of the live view page. 2. Click a moving object in the live image. The device tracks the target and keeps it in the center of live view image. 5.1.13 Conduct 3D ‰‰‰‰ti‰n‰n‰...
  • Page 67 Network Speed Dome User Manual MULTICAST is suitable for the ‰‰‰‰‰ti‰n that there are m‰‰ti‰‰‰ clients. You should set the m‰‰tic‰‰‰ address for them before ‰‰‰‰cti‰n‰ Note For detailed ‰n‰‰rm‰ti‰n about m‰‰tic‰‰‰‰ refer to ‰‰‰‰〷c‰‰‰ . HTTP HTTP is suitable for the ‰‰‰‰‰ti‰n that the third-party needs to get the stream from the device.

  • Page 68: Chapter 6 Video And Audio

    Network Speed Dome User Manual Chapter 6 Video and Audio This part introduces the c‰n‰〶‰‰r‰ti‰n of video and audio related parameters. 6.1 Video ‰‰〷呠n‰‰ This part introduces the ‰‰〷呠n‰‰ of video parameters, such as, stream type, video encoding, and r‰‰‰‰‰ti‰n‰ Go to ‰‰〷呠n‰...

  • Page 69: Bitrate Type And Max. Bitrate

    Network Speed Dome User Manual 6.1.4 Bitrate Type and Max. Bitrate Constant Bitrate It means that the stream is compressed and ‰r‰n‰m‰‰〷‰‰ at a c‰m‰‰r‰tiv‰‰y ‰〶x‰‰ bitrate. The compression speed is fast, but mosaic may occur on the image. Variable Bitrate It means that the device ‰‰‰‰m‰tic‰‰‰y adjust the bitrate under the set Max.
  • Page 70 Network Speed Dome User Manual H.264+ H.264+ is an improved compression coding technology based on H.264. By enabling H.264+, you can ‰‰tim‰‰‰ the HDD c‰n‰‰m‰ti‰n by its maximum average bitrate. Compared to H.264, H.264+ reduces storage by up to 50% with the same maximum bitrate in most scenes. When H.264+ is enabled, Max.

  • Page 71: I-Frame Interval

    Network Speed Dome User Manual 6.1.9 I-Frame Interval I-frame interval ‰‰‰〶n‰‰ the number of frames between 2 I-frames. In H.264 and H.265, an I-frame, or intra frame, is a self-contained frame that can be independently decoded without any reference to other images. An I-frame consumes more bits than other frames.

  • Page 72: Audio Output

    Network Speed Dome User Manual Audio Input Select MicIn for the built-in microphone, and LineIn for external audio pick-up device. Note MicIn is only supported by certain models. Input Volume Adjust the volume of the audio input. Environmental Noise Filter Set it as OFF or ON.

  • Page 73: Roi

    Network Speed Dome User Manual 6.4 ROI ROI (Region of Interest) encoding helps to discriminate the ROI and background ‰n‰‰rm‰ti‰n in video compression. The technology assigns more encoding resource to the region of interest, thus to increase the quality of the ROI whereas the background ‰n‰‰rm‰ti‰n is less focused. 6.4.1 Set ROI ROI (Region of Interest) encoding helps to assign more encoding resource to the region of interest, thus to increase the quality of the ROI whereas the background ‰n‰‰rm‰ti‰n is less focused.

  • Page 74: Display Info. On Stream

    Network Speed Dome User Manual A red frame appears in the live view. 4. Drag the frame to the target area. 5. Click Save. Note Some models support target cropping. Refer to the actual device for details. ● This ‰‰ncti‰n is mutually exclusive with some ‰‰ncti‰n‰‰ ‰ft‰r enabling target cropping, some ●...
  • Page 75 Network Speed Dome User Manual Exposure ‰‰〷呠n‰‰ Exposure is controlled by the c‰mb‰n‰ti‰n of iris, ‰‰‰‰〷‰r‰ and gain. You can adjust image ‰‰〶‰c‰ by ‰‰〷呠n‰ exposure parameters. Exposure Mode Auto The iris, ‰‰‰‰〷‰r‰ and gain values are adjusted ‰‰‰‰m‰tic‰‰‰y‰ You can limit the changing ranges of iris, ‰‰‰‰〷‰r and gain by ‰‰〷呠n‰ Max. Iris Limit, Min. Iris Limit, Max.
  • Page 76 Network Speed Dome User Manual Min. Focus Distance When the distance between the scene and lens is shorter than the Min. Focus Distance, the lens does not focus. C‰m‰‰tib‰‰ This mode is only recommended for indoor devices with a bubble when you cannot get a clear image with other ‰‰ti‰n‰‰...
  • Page 77 Network Speed Dome User Manual Brightness Limit Adjust the upper limit of supplement light power. For devices with both white light and IR light, white light and IR light brightness limit can be set separately. Note The ‰‰ncti‰n varies on device ‰‰〷呠n‰‰ and device models. If you focus on an object against strong backlight, the object will be too dark to be seen clearly.

  • Page 78: Image Parameters Switch

    Network Speed Dome User Manual Set the DNR level for both space DNR and tim‰ DNR to control the noise r‰‰‰cti‰n degree. The higher level means stronger r‰‰‰cti‰n degree. White Balance White balance is the white r‰n‰‰ti‰n ‰‰ncti‰n of the camera. It is used to adjust the color temperature according to the environment.

  • Page 79: Mirror

    Network Speed Dome User Manual 2. Select a preset. 3. Check and set a tim‰ period and a linked scene mode. 4. Click Save. 6.7.3 Mirror When the live view image is the reverse of the actual scene, this ‰‰ncti‰n helps to display the image normally.

  • Page 80: Chapter 7 Video Recording And Picture Capture

    Network Speed Dome User Manual Chapter 7 Video Recording and Picture Capture This part introduces the ‰‰‰r‰ti‰n‰ of capturing video clips and snapshots, playback, and downloading captured ‰〶‰‰‰‰ 7.1 Storage ‰‰〷呠n‰‰ This part introduces the c‰n‰〶‰‰r‰ti‰n of several common storage paths. 7.1.1 Memory Card You can view the capacity, free space, status, type, and property of the memory card.
  • Page 81 The device detects the status of Hikvision memory card. You receive n‰ti‰〶c‰ti‰n‰ when your memory card is detected abnormal. Before You Start The c‰n‰〶‰‰r‰ti‰n page only appears when a Hikvision memory card is installed to the device. Steps 1. Go to C‰n‰〶‰‰‰‰ti‰n → Storage → Storage Management → Memory Card ‰‰‰‰cti‰n .

  • Page 82: Set Ftp

    Network Speed Dome User Manual It shows the percentage of the remaining lifespan. The lifespan of a memory card may be ‰n‰〶‰‰nc‰‰ by factors such as its capacity and the bitrate. You need to change the memory card if the remaining lifespan is not enough. Health Status It shows the c‰n‰‰ti‰n of your memory card.

  • Page 83: Set Nas

    Network Speed Dome User Manual Steps 1. Go to C‰n‰〶‰‰‰‰ti‰n → Event → Alarm ‰‰〷呠n‰ → FTP . 2. C‰n‰〶‰‰r‰ FTP ‰‰〷呠n‰‰‰ Server Address and Port The FTP server address and corresponding port. User Name and Password The FTP user should have the permission to upload pictures. If the FTP server supports picture uploading by anonymous users, you can check Anonymous to hide your device ‰n‰‰rm‰ti‰n during uploading.

  • Page 84: Emmc ‰R‰‰‰Cti‰N

    Network Speed Dome User Manual M‰‰ntin‰ Type Select ‰〶‰‰ system protocol according to the ‰‰‰r‰ti‰n system. Enter user name and password of the net HDD to guarantee the security if SMB/CIFS is selected. 4. Set the Server Address and File Path for the disk. Server Address The IP address of the network disk.

  • Page 85: Video Recording

    Network Speed Dome User Manual Steps C‰‰ti‰n If the cloud storage is enabled, the pictures are stored in the cloud video manager ‰〶r‰‰‰y‰ 1. Go to C‰n‰〶‰‰‰‰ti‰n → Storage → Storage Management → Cloud Storage . 2. Check Enable. 3. Set basic parameters. Protocol Version The protocol version of the cloud video manager.
  • Page 86 Network Speed Dome User Manual Note The record type is vary according to ‰‰‰〶‰r‰n‰ models. C‰ntin‰‰‰‰ The video will be recorded c‰ntin‰‰‰‰‰y according to the schedule. M‰ti‰n When m‰ti‰n ‰‰‰‰cti‰n is enabled and trigger recording is selected as linkage method, object movement is recorded.

  • Page 87: Record Manually

    Network Speed Dome User Manual The recordings are deleted when they exceed the expired tim‰‰ The expired tim‰ is c‰n‰〶‰‰r‰b‰‰‰ Note that once the recordings are deleted, they can not be recovered. 6. Click Save. 7.2.2 Record Manually Steps 1. Go to C‰n‰〶‰‰‰‰ti‰n → Local . 2.

  • Page 88: Capture ‰‰‰‰M‰Tic‰‰‰Y

    Network Speed Dome User Manual 7.3.1 Capture ‰‰‰‰m‰tic‰‰‰y This ‰‰ncti‰n can capture pictures ‰‰‰‰m‰tic‰‰‰y during c‰n‰〶‰‰r‰‰ tim‰ periods. Before You Start If event-triggered capture is required, you should c‰n‰〶‰‰r‰ related linkage methods in event ‰‰〷呠n‰‰‰ Refer to Event and Alarm for event ‰‰〷呠n‰‰‰ Steps 1.

  • Page 89: View And Download Picture

    Network Speed Dome User Manual The picture is compressed with good quality. 3. Click Save. 4. Click near the live view or play back window to capture a picture manually. 7.3.3 View and Download Picture You can search, view and download the pictures stored in the local storage or network storage. Steps 1.

  • Page 90: Chapter 8 Event And Alarm

    Network Speed Dome User Manual Chapter 8 Event and Alarm This part introduces the c‰n‰〶‰‰r‰ti‰n of events. The device takes certain response to triggered alarm. 8.1 Basic Event 8.1.1 Set M‰ti‰n ‰‰‰‰cti‰n This ‰‰ncti‰n detects moving objects in the ‰‰‰‰cti‰n region and trigger linkage ‰cti‰n‰‰ Steps 1.
  • Page 91 Network Speed Dome User Manual Figure 8-1 Set Rules 4. ‰‰ti‰n‰‰‰ Click to clear all the areas. 5. ‰‰ti‰n‰‰‰ You can set the parameters of m‰‰ti‰‰‰ areas by r‰‰‰‰tin‰ the above steps. Expert Mode You can c‰n‰〶‰‰r‰ ‰‰‰〶‰r‰n‰ m‰ti‰n ‰‰‰‰cti‰n parameters for day and night according to the actual needs.

  • Page 92: Set Video Tampering Alarm

    Network Speed Dome User Manual The higher the value of ‰‰n‰‰tiv‰‰y is, the more ‰‰n‰‰tiv‰ the m‰ti‰n ‰‰‰‰cti‰n is. If scheduled image ‰‰〷呠n‰‰ is enabled, the ‰‰n‰‰tiv‰‰y of day and night can be set separately. 3. Select an Area and click .

  • Page 93: Set Alarm Input

    Network Speed Dome User Manual Figure 8-3 Set Video Tampering Area 5. ‰‰ti‰n‰‰‰ Click to delete all the drawn areas. 6. Refer to Set Arming Schedule for ‰‰〷呠n‰ scheduled tim‰‰ Refer to Linkage Method ‰‰〷呠n‰‰ for ‰‰〷呠n‰ linkage method. 7. Click Save. 8.1.3 Set Alarm Input Alarm signal from the external device triggers the corresponding ‰cti‰n‰...

  • Page 94: Set ‰Xc‰‰Ti‰N Alarm

    Network Speed Dome User Manual Steps 1. Go to C‰n‰〶‰‰‰‰ti‰n → Event → Event and ‰‰‰‰cti‰n → Alarm Input . 2. Check Enable Alarm Input Handling. 3. Select an Alarm Input NO. and click to set alarm input. 4. Select Alarm Type from the dropdown list. Edit the Alarm Name. 5.

  • Page 95: Set Vandal-Proof Alarm

    Network Speed Dome User Manual Audio Loss ‰‰‰‰cti‰n Detect sudden loss of audio track. Sudden Increase of Sound Intensity ‰‰‰‰cti‰n Detect sudden increase of sound intensity. ‰‰n‰‰tiv‰‰y and Sound Intensity Threshold are c‰n‰〶‰‰r‰b‰‰‰ Note The lower the ‰‰n‰‰tiv‰‰y is, the more ‰‰‰n‰‰〶c‰n‰ the change should be to trigger the ●...

  • Page 96: Smart Event

    Network Speed Dome User Manual 8.2 Smart Event Note The ‰‰ncti‰n varies according to ‰‰‰〶‰r‰n‰ models. ● To enable this ‰‰ncti‰n‰ you may need to select Smart Event on VCA Resource page. For certain ● models, this ‰‰ncti‰n is supported in the Single Channel mode. See for details. For certain models, when the smart events are in use, the EIS is unavailable.

  • Page 97: Set Line Crossing ‰‰‰‰Cti‰N

    Network Speed Dome User Manual ‰‰‰‰cti‰n You can specify the object type, and the device only detects the selected Target type of objects. Figure 8-4 Draw Area 8. Click Save. 9. ‰‰ti‰n‰‰‰ Click Add, and repeat above steps to set other rules. Note Up to 4 rules can be set.
  • Page 98 Network Speed Dome User Manual Normally, the PTZ control is ‰‰‰‰m‰tic‰‰‰y locked when you enter the c‰n‰〶‰‰r‰ti‰n interface. You can manually resume the lock when the countdown is over. 4. Adjust the live image to the desired scene by using PTZ control b‰‰〷‰n‰‰ 5.

  • Page 99: Set Region Entrance ‰‰‰‰Cti‰N

    Network Speed Dome User Manual 1) Click , and drag the mouse on live image. If you want to change the size, click the b‰‰〷‰n and draw again. 2) Click , and drag the mouse on the live image. If you want to change the size, click the b‰‰〷‰n and draw again.

  • Page 100: Set Region ‰X‰Tin‰ ‰‰‰‰Cti‰N

    Network Speed Dome User Manual 2) Click , and drag the mouse on the live image. If you want to change the size, click the b‰‰〷‰n and draw again. 7. Set ‰‰‰‰cti‰n parameters. ‰‰n‰‰tiv‰‰y It stands for the ‰‰n‰‰tiv‰‰y of ‰‰‰‰ctin‰ an target. The higher the value is, the more easily the target is detected.
  • Page 101 Network Speed Dome User Manual Steps 1. Go to VCA → Set ‰‰‰‰‰c‰ti‰n → Smart Event → Region ‰x‰tin‰ ‰‰‰‰cti‰n . 2. Check Enable. 3. ‰‰ti‰n‰‰‰ Click to lock PTZ control to prevent the ‰n‰‰rr‰‰ti‰n from other PTZ related ‰cti‰n during c‰n‰〶‰‰r‰ti‰n‰...

  • Page 102: Set Object Removal ‰‰‰‰Cti‰N

    Network Speed Dome User Manual Figure 8-7 Draw Area 8. Click Save. 9. ‰‰ti‰n‰‰‰ Click Add, and repeat above steps to set other rules. Note Up to 4 rules can be set. 10. Set arming schedule. See Set Arming Schedule . 11.
  • Page 103 Network Speed Dome User Manual 5. Draw ‰‰‰‰cti‰n area. 1) Click 2) Click on the live image to draw the boundaries of the ‰‰‰‰cti‰n area, and right click to complete drawing. 6. ‰‰ti‰n‰‰‰ Set the minimum size and the maximum size for the target to improve ‰‰‰‰cti‰n accuracy.

  • Page 104: Set ‰N‰‰〷‰N‰‰‰ Baggage ‰‰‰‰Cti‰N

    Network Speed Dome User Manual 11. Set linkage method. See Linkage Method ‰‰〷呠n‰‰ . 8.2.6 Set ‰n‰‰〷‰n‰‰‰ Baggage ‰‰‰‰cti‰n ‰n‰‰〷‰n‰‰‰ baggage ‰‰‰‰cti‰n is used to detect the objects ‰‰ft over in the ‰r‰‰‰‰〶n‰‰ area. Linkage methods are triggered ‰ft‰r the object is ‰‰ft and stays in the area for a set tim‰ period. Before You Start Go to VCA →...

  • Page 105: Set Tracking Parameters

    Network Speed Dome User Manual Figure 8-9 Draw Area 8. Click Save. 9. ‰‰ti‰n‰‰‰ Click Add, and repeat above steps to set other rules. Note Up to 4 rules can be set. 10. Set arming schedule. See Set Arming Schedule . 11.

  • Page 106: Overlay And Capture

    Network Speed Dome User Manual Two modes are available. Controlled by target frame or by ti‰‰ angle of the device. By Tilt Angle The device calculates the tracking zoom r‰ti‰ ‰‰‰‰m‰tic‰‰‰y according to the ti‰‰ angle of the device. Note The ‰〷呠‰‰‰‰...

  • Page 107: Chapter 9 Arming Schedule And Alarm Linkage

    Network Speed Dome User Manual Chapter 9 Arming Schedule and Alarm Linkage Arming schedule is a customized tim‰ period in which the device performs certain tasks. Alarm linkage is the response to the detected certain incident or target during the scheduled tim‰‰ 9.1 Set Arming Schedule Set the valid tim‰...

  • Page 108: Trigger Alarm Output

    Network Speed Dome User Manual 9.2.1 Trigger Alarm Output If the device has been connected to an alarm output device, and the alarm output No. has been c‰n‰〶‰‰r‰‰‰ the device sends alarm ‰n‰‰rm‰ti‰n to the connected alarm output device when an alarm is triggered.

  • Page 109: Ftp/Nas/Memory Card Uploading

    Network Speed Dome User Manual Custom a name for the alarm output. 2. Click Manual Alarm to enable manual alarm output. 3. ‰‰ti‰n‰‰‰ Click Clear Alarm to disable manual alarm output. 9.2.2 FTP/NAS/Memory Card Uploading If you have enabled and c‰n‰〶‰‰r‰‰ the FTP/NAS/memory card uploading, the device sends the alarm ‰n‰‰rm‰ti‰n to the FTP server, network ‰‰〷‰c‰‰‰...

  • Page 110: N‰Ti‰Y Surveillance Center

    Network Speed Dome User Manual Note If you want to use STARTTLS, make sure that the protocol is supported by your email server. If you check the Enable STARTTLS while the protocol is not supported by your email sever, your email is sent with no ‰ncry‰ti‰n‰ 4) ‰‰ti‰n‰‰‰...

  • Page 111: Audible Warning

    Network Speed Dome User Manual Flashing ‰‰‰‰ti‰n The tim‰ that the ‰〶‰‰‰‰n‰ lasts when one alarm happens. Flashing Frequency The rate at which the light ‰〶‰‰‰‰‰‰ High frequency, medium frequency, low frequency, and normally on are selectable. Brightness The brightness of the light. 3.

  • Page 112: Alarm Server

    Network Speed Dome User Manual Note The ‰‰ncti‰n is only supported by certain device models. Set Alarm Server Steps 1. Go to C‰n‰〶‰‰‰‰ti‰n → Event → Alarm ‰‰〷呠n‰ → Alarm Server . 2. Enter ‰‰‰tin‰ti‰n IP or Host Name, URL, and Port. 3.

  • Page 113: Chapter 10 Network ‰‰〷呠N

    Network Speed Dome User Manual Chapter 10 Network ‰‰〷呠n‰‰ 10.1 TCP/IP TCP/IP ‰‰〷呠n‰‰ must be properly c‰n‰〶‰‰r‰‰ before you operate the device over network. IPv4 and IPv6 are both supported. Both versions can be c‰n‰〶‰‰r‰‰ simultaneously without c‰n‰〶‰ctin‰ to each other. Go to C‰n‰〶‰‰‰‰ti‰n →...

  • Page 114: Port Mapping

    Network Speed Dome User Manual Input IPv6 Address, IPv6 Subnet, IPv6 Default Gateway. Consult the network administrator for required ‰n‰‰rm‰ti‰n‰ It stands for maximum transmission unit. It is the size of the largest protocol data unit that can be communicated in a single network layer ‰r‰n‰‰cti‰n‰ The valid value range of MTU is 1280 to 1500.

  • Page 115: Set Manual Port Mapping

    Network Speed Dome User Manual 10.2.2 Set Manual Port Mapping Steps 1. Check Enable UPnP™, and choose a friendly name for the device, or you can use the default name. 2. Select the port mapping mode to Manual, and set the external port to be the same as the internal port.

  • Page 116: Snmp

    Network Speed Dome User Manual Figure 10-1 Port Mapping on Router Note The port of the network camera cannot c‰n‰〶‰c‰ with other ports. For example, some web management port of the router is 80. Change the camera port if it is the same as the management port.

  • Page 117: Access To Device Via Domain Name

    Network Speed Dome User Manual And you also need to use the ‰‰‰〶‰r‰n‰ version according to the security level required. SNMP v1 is not secure and SNMP v2 requires password for access. And SNMP v3 provides ‰ncry‰ti‰n and if you use the third version, HTTPS protocol must be enabled. 3.

  • Page 118: Accessing Via Mobile Client

    Network Speed Dome User Manual ‰ft‰r successful dial-up, the dynamic IP address of the WAN is displayed. User Name User name for dial-up network access. Password Password for dial-up network access. C‰n‰〶‰m Input your dial-up password again. 4. Click Save. 5.

  • Page 119: Set Up Hik-Connect

    - Visit ‰‰〷‰‰‰‰‰‰‰‰‰‰‰‰‰‰‰‰‰v‰‰‰‰n‰c‰m to download the ‰‰‰‰‰c‰ti‰n according to your mobile phone system. - Visit the ‰〶噠c‰‰‰ site of our company. Then go to Support → Tools → Hikvision App Store . - Scan the QR code below to download the ‰‰‰‰‰c‰ti‰n‰...

  • Page 120: Add Camera To Hik-Connect

    Network Speed Dome User Manual 2. Start the ‰‰‰‰‰c‰ti‰n and register for a Hik-Connect user account. 3. Log in ‰ft‰r r‰‰‰‰‰r‰ti‰n‰ 10.6.3 Add Camera to Hik-Connect Steps 1. Connect your mobile device to a Wi-Fi. 2. Log into the Hik-Connect app. 3.

  • Page 121: M‰‰Tic

    Network Speed Dome User Manual Note It refers to the port through which the browser accesses the device. For example, when the HTTP Port is m‰‰‰‰〶‰‰ to 81, you need to enter ‰‰〷‰‰‰‰192‰1‰8‰1‰‰‰‰81 in the browser for login. 3. Check Enable in HTTPS. Note You can click TLS ‰‰〷呠n‰‰...

  • Page 122: Rtsp

    Network Speed Dome User Manual 10.9 RTSP RTSP (Real Time Streaming Protocol) is an ‰‰‰‰‰c‰ti‰n‰‰‰y‰r controlling protocol for streaming media. Steps 1. Go to C‰n‰〶‰‰‰‰ti‰n → Network → Network Service → RTSP . 2. Enter Port. 3. Set M‰‰tic‰‰‰ parameters. Stream Type The stream type as the m‰‰tic‰‰‰...

  • Page 123: M‰‰Tic

    Network Speed Dome User Manual Video Port The video port of the selected stream. Audio Port The audio port of the selected stream. 4. Select Server C‰‰ti‰〶c‰‰‰. 5. Select Encrypted Algorithm. 6. Click Save. Note Only certain device models support this ‰‰ncti‰n‰ ●...

  • Page 124: Websocket(S)

    Network Speed Dome User Manual 10.12 WebSocket(s) WebSocket or WebSockets protocol should be enabled if you use Google Chrome 57 and its above version or Mozilla Firefox 52 and its above version to visit the device. Otherwise, live view, image capture, digital zoom, etc.

  • Page 125: Set Isup

    Network Speed Dome User Manual 10.16 Set ISUP When the device is registered on ISUP ‰‰‰tf‰rm (formerly called Ehome), you can visit and manage the device, transmit data, and forward alarm ‰n‰‰rm‰ti‰n over public network. Steps 1. Go to C‰n‰〶‰‰‰‰ti‰n → Network → ‰‰‰tf‰‰m Access → ISUP . 2.
  • Page 126 Network Speed Dome User Manual 3. Set Enhanced SDK Service parameters. 1) Check Enable to add the device to the client ‰‰ftw‰r‰ with SDK over TLS protocol. 2) ‰‰ti‰n‰‰‰ Click TLS ‰‰〷呠n‰‰ to enable the TLS version that the device supports. Refer to TLS for details.

  • Page 127: Chapter 11 System And Security

    Network Speed Dome User Manual Chapter 11 System and Security It introduces system maintenance, system ‰‰〷呠n‰‰ and security management, and explains how to c‰n‰〶‰‰r‰ relevant parameters. 11.1 View Device ‰n‰‰‰m‰ti‰n You can view device ‰n‰‰rm‰ti‰n‰ such as Device No., Model, Serial No. and Firmware Version. Enter C‰n‰〶‰‰‰‰ti‰n →...

  • Page 128: Search And Manage Log

    Network Speed Dome User Manual 2. Click Restore or Default according to your needs. Restore Reset device parameters, except user ‰n‰‰rm‰ti‰n‰ IP parameters and video format to the default ‰‰〷呠n‰‰‰ Default Reset all the parameters to the factory default. Note Be careful when using this ‰‰ncti‰n‰...

  • Page 129: Search And Export Data Aware ‰N‰‰Rm‰Ti‰N

    Network Speed Dome User Manual Go to Maintenance and Security → Maintenance → Device Debugging → Diagnose ‰n‰‰‰m‰ti‰n . Click Export. In the pop-up window, check desired diagnose ‰n‰‰rm‰ti‰n and click Export to export corresponding diagnose ‰n‰‰rm‰ti‰n of the device. 11.8 Search and Export Data Aware ‰n‰‰‰m‰ti‰n The data aware ‰‰ncti‰n is used to search and export the data of the restart, arming and capture alarm ‰‰‰ti‰tic‰‰...

  • Page 130: Time And Date

    Network Speed Dome User Manual 11.11 Time and Date You can c‰n‰〶‰‰r‰ tim‰ and date of the device by c‰n‰〶‰‰r‰n‰ tim‰ zone, tim‰ ‰ync‰r‰n‰‰‰ti‰n and Daylight Saving Time (DST). 11.11.1 Synchronize Time Manually Steps 1. Go to C‰n‰〶‰‰‰‰ti‰n → System → System ‰‰〷呠n‰‰ → Time ‰‰〷呠n‰‰ . 2.

  • Page 131: Set Dst

    Network Speed Dome User Manual Note Server Address is NTP server IP address. 5. Click Test to test server c‰nn‰cti‰n‰ 6. Click Save. 11.11.4 Set DST If the region where the device is located adopts Daylight Saving Time (DST), you can set this ‰‰ncti‰n‰...

  • Page 132: Set Mac Address Filter

    Network Speed Dome User Manual Steps 1. Go to Maintenance and Security → Security → IP Address Filter . 2. Check Enable. 3. Select the type of IP address ‰〶‰‰‰r‰ Blocklist IP addresses in the list cannot access the device. Allowlist Only IP addresses in the list can access the device.

  • Page 133: Set Qos

    Network Speed Dome User Manual Search Security Audit Logs You can search and analyze the security log ‰〶‰‰‰ of the device so as to ‰〶n‰ out the illegal intrusion and troubleshoot the security events. Steps Note This ‰‰ncti‰n is only supported by certain camera models. 1.

  • Page 134: Set Ieee 802.1X

    Network Speed Dome User Manual Note QoS needs support from network device such as router and switch. Steps 1. Go to C‰n‰〶‰‰‰‰ti‰n → Network → Network ‰‰〷呠n‰‰ → QoS . 2. Set Video/Audio DSCP, Event/Alarm DSCP and Management DSCP. Note Network can ‰‰‰nti‰y the priority of data transmission.

  • Page 135: C‰Rti‰〶C‰‰‰ Management

    Network Speed Dome User Manual Go to Maintenance and Security → Security → Login Management → Control Timeout ‰‰〷呠n‰‰ to complete ‰‰〷呠n‰‰‰ 11.13.8 C‰‰ti‰〶c‰‰‰ Management It helps to manage the server/client c‰rti‰〶c‰‰‰‰ and CA c‰rti‰〶c‰‰‰‰ and to send an alarm if the c‰rti‰〶c‰‰‰‰...
  • Page 136 Network Speed Dome User Manual 5. Click Save. The c‰rti‰〶c‰‰‰ request details are displayed in a pop-up window. 6. Copy the request content and save it as a request ‰〶‰‰‰ 7. Send the ‰〶‰‰ to a trusted-third party for signature. 8.

  • Page 137: Tls

    Network Speed Dome User Manual Install CA C‰‰ti‰〶c‰‰‰ Before You Start Prepare a CA c‰rti‰〶c‰‰‰ in advance. Steps 1. Go to Maintenance and Security → Security → C‰‰ti‰〶c‰‰‰ Management . 2. Click Import in the CA C‰‰ti‰〶c‰‰‰ list. 3. Input C‰‰ti‰〶c‰‰‰ ID. Note The input c‰rti‰〶c‰‰‰...

  • Page 138: User And Account

    Network Speed Dome User Manual C‰‰ti‰n Use the ‰‰ncti‰n with c‰‰ti‰n‰ The security risk of device internal ‰n‰‰rm‰ti‰n leakage exists when the ‰‰ncti‰n is enabled. 11.13.10 User and Account Set User Account and Permission The administrator can add, modify, or delete other accounts, and grant ‰‰‰〶‰r‰n‰ permission to ‰‰‰〶‰r‰n‰...
  • Page 139 Network Speed Dome User Manual Online Users The ‰n‰‰rm‰ti‰n of users logging into the device is shown. Go to C‰n‰〶‰‰‰‰ti‰n → System → User Management → Online Users to view the list of online users. Simultaneous Login The administrator can set the maximum number of users logging into the system through web browser simultaneously.

  • Page 140: Appendix A. Device Command

    Network Speed Dome User Manual Appendix A. Device Command Scan the following QR code to get device common serial port commands. Note that the command list contains the commonly used serial port commands for all Hikvision network cameras.

  • Page 141: Appendix B. Device C‰Mm‰N‰C‰Ti‰N Matrix

    Network Speed Dome User Manual Appendix B. Device C‰mm‰n‰c‰ti‰n Matrix Scan the following QR code to get device c‰mm‰n‰c‰ti‰n matrix. Note that the matrix contains all c‰mm‰n‰c‰ti‰n ports of Hikvision network cameras.
  • Page 142 UD31024B...

Table of Contents