HIKVISION DS-QFV5002 Quick Start Manual

Positioning Vibration Fiber Sensing Processor
Quick Start Guide
About this Document
This Document includes instructions for using and managing the Product. Pictures,
charts, images and all other information hereinafter are for description and
explanation only.
The information contained in the Document is subject to change, without notice, due
to firmware updates or other reasons. Please find the latest version of the Document at
the Hikvision website (https://www.hikvision.com). Unless otherwise agreed,
Hangzhou Hikvision Digital Technology Co., Ltd. or its affiliates (hereinafter referred
to as "Hikvision") makes no warranties, express or implied.
Please use the Document with the guidance and assistance of professionals trained
in supporting the Product.
About this Product
This product can only enjoy the after-sales service support in the country or
region where the purchase is made.
Acknowledgment of Intellectual Property Rights
Hikvision owns the copyrights and/or patents related to the technology embodied in
the Products described in this Document, which may include licenses obtained from
third parties.
Any part of the Document, including text, pictures, graphics, etc., belongs to
Hikvision. No part of this Document may be excerpted, copied, translated, or
modified in whole or in part by any means without written permission.
and other Hikvision's trademarks and logos are the properties of
Hikvision in various jurisdictions.
Other trademarks and logos mentioned are the properties of their respective owners.
LEGAL DISCLAIMER
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS DOCUMENT AND
THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE
PROVIDED "AS IS" AND "WITH ALL FAULTS AND ERRORS". HIKVISION MAKES NO
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A
PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN
NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL,
INCIDENTAL, OR INDIRECT DAMAGES,
INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF
DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING
NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE
OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES OR LOSS.
YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT
SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR
ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM
CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY
RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF
REQUIRED.
YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND
YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE
APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A
MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING
WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR
DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT
FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF
WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF
CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO
ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF
HUMAN RIGHTS ABUSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS DOCUMENT AND THE
APPLICABLE LAW, THE LATTER PREVAILS.
© Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
1
Appearance
indicator Light
UD37362B
2
Wiring
Remove the back baffle.
Solid blue: power on.
Light off: power off.
Solid orange: tampering is triggered.
483 mm (19.02") 483 mm (19.02")
Front
Interfaces:
CHANNEL 1 CHANNEL 2 RS232
498 mm (19.61")
● In the use of the product, you must be in strict compliance with
the electrical safety regulations of the nation and region.
● The device shall not be exposed to dripping or splashing and that
no objects filled with liquids, such as vases, shall be placed on the
device.
● Caurion:To reduce the risk of fire,replace only with same type
and rating of fuse.
● The device must be connected to an earthed mains socket-outlet.
● If the device has been designed or, when required, modified for
connection to an IT power distribution system, the device
installation instructions shall so state.
● No naked flame sources, such as lighted candles, should be
placed on the device.
● This device is suitable for use in server room or cabinet only.
● Never place the device in an unstable location. The device may
fall, causing serious personal injury or death.
● Do not touch the sharp edges or corners.
● If the device is intended to be moved or used in a certain
direction, keep the required direction when moving or using the
device.
CLASS 1 LASER PRODUCT
The product meets the requirements of Class 1 laser products. Class 1 Laser
products that are safe during use, including long-term direct intrabeam viewing,
even when exposure occurs while using telescopic optics.
Do not plug and unplug optical fiber cables with electricity.
Please operate after powering off.
INPUT OUTPUT 1 OUTPUT 3
AC 220V
CLOCK OUTPUT 2 OUTPUT 4
Side
Safety Instruction