Racelogic LabSat 4 Quick Start Manual

Gnss record & replay simulator

Download this manual

LabSat 4 (P) - Quick Start Guide

You can download the PDF here.

Power Supply

Battery

LabSat 4 (P) is shipped with a rechargeable, lithium-ion smart battery pack. A fully charged battery provides a unit

operation time of minimum 1 hour. You can charge the battery by connecting an external power source to

the

Power

port on the LabSat 4 unit.

Notes:

• For safety reasons, the battery will not be fully charged when shipped from us. We recommend that you charge

it fully before use or connect the LabSat 4 unit to external power the first time you use it.

• Take note of the expected replaying time and make sure that you have access to an external power source (and

the appropriate cable for it) if you think it will take more time than the battery can provide.

WARNING

• Never leave a system unattended during the charging or discharging of the battery pack.

• The battery should be fully charged when stored.

If a battery is left depleted for a prolonged period then it is likely that the performance of the battery will degrade

and may be unusable.

You can read more about the battery pack, including operation, charging, fitting, removal and handling, here.

External Power

You can apply power to the LabSat 4 (P) unit via mains power with the RLVBACS020 power supply. When you power

https://en.racelogic.support//Product_Info/LabSat_4/LabSat_4_(P)/LabSat_4_(P)_-_Quick_Start_Guide

Need help?

Do you have a question about the LabSat 4 and is the answer not in the manual?

Page 1 You can read more about the battery pack, including operation, charging, fitting, removal and handling, here. External Power You can apply power to the LabSat 4 (P) unit via mains power with the RLVBACS020 power supply. When you power https://en.racelogic.support//Product_Info/LabSat_4/LabSat_4_(P)/LabSat_4_(P)_-_Quick_Start_Guide...
Page 2 LabSat 4 unit from an external source, it will automatically charge the internal battery pack, and seamlessly switch to battery operation when the external power is removed. Replaying Connect the Device Under Test (DUT) to the RF OUT port on the rear panel on the LabSat 4 unit.
Page 3 Press the Status screen and start the playback of the file. PAUSE/PLAY button during the replay to stop the replay. The display will return to the File Selection Screen. https://en.racelogic.support//Product_Info/LabSat_4/LabSat_4_(P)/LabSat_4_(P)_-_Quick_Start_Guide...

Labsat 4p