Pizza prep tables sandwich/salad units under-counter refrigerators and freezers worktop refrigerators and freezers (28 pages)
Summary of Contents for VALPRO VP19R-HC
Page 2
Do not store explosive substances such as aerosol cans with flammable propellant in this appliance. The appliance uses flammable insulation blowing gas C5H10, disposal of the appliance shall be in accordance with the regulations of federal, state, and local authorities. 1-888-VALPRO-8 / 1-813-502-0300 ValproRefrigeration.com...
Work done by unqualified individuals could potentially be dangerous and will void the warranty. Valpro accepts no responsibility for any situation resulting from work performed by untrained and/or unauthorized technicians.
All Valpro products are factory tested for performance and are free from defects when shipped. Exercise care unloading and moving equipment to site of installation to avoid damage or injury. Valpro is not responsible for damage in transit. Any claim for damages must be made by the consignee directly with the carrier.
Service, Installation & Care Manual SPECIFICATION *Due to periodic changes and regulations the specifications in these sheets is subject to change without notice. Please visit our website or contact your sales representative for more information. 1-888-VALPRO-8 / 1-813-502-0300 ValproRefrigeration.com...
Service, Installation & Care Manual INSTALLATION Valpro equipment is not designed for personal, family, or household purposes, and its sale for such purposes is not intended. In the event the equipment is so used, this warranty shall be null and void, and the equipment shall be deemed to have been sold “as is, where is”...
This allows evaporator coil to clear the ice during defrost. When the coil temperature reaches 45°F (or after 20 minutes), the unit re-starts ending the defrost cycle. The anti-condensation heaters (located on the door frames) work in conjunction with the compressor. 1-888-VALPRO-8 / 1-813-502-0300 ValproRefrigeration.com...
SOLID-STATE THERMOSTAT CONTROLS AND INDICATORS 1. CONTROLLER FRONT PANEL COMMANDS (NOTE: Some units are equipped with separate power switches, & LED display may be or BLUE) 1.1 KEY FUNCTION 1.2 KEY COMBINATION FUNCTIONS 1.3 PROCESSES INDICATED BY LEDS 1-888-VALPRO-8 / 1-813-502-0300 ValproRefrigeration.com...
Page 9
Note: Controller has a hidden menu with a submenu which can be accessed to adjust refrigeration cycle parameters. It is NOT recommended these parameters be changed unless instructed by Valpro support. Should parameter settings need to be checked or changed, please contact Valpro support for instructions and programed factory settings to ensure proper operation.
Perform routine stainless-steel cleaning with soap and water. Extreme stains or grease should be cleaned with a non-abrasive cleaner and plastic scrub pad (rub with the grain). There are also stainless- steel cleaners available which can restore the protective layer and preserve the finish. 1-888-VALPRO-8 / 1-813-502-0300 ValproRefrigeration.com...
Once decommissioned the disposal must be in accordance with applicable federal and local regulations. Information regarding proper disposal may be obtained from your local supplier and the relevant local authorities or environmental agencies. Follow measures to avoid the risk of child entrapment. 1-888-VALPRO-8 / 1-813-502-0300 ValproRefrigeration.com...
Controller Displaying Alarm codes Codes” • Controller parameters have been • Contact Valpro support to review Refrigeration cycle problems changed from factory settings. controller parameter settings. NOTE: Should unit not be cooling, turn off unit and call service. Operating unit for extended periods while not cooling can damage the compressor.
Service, Installation & Care Manual CONDITIONS: All service under this warranty, for either labor or parts, must be performed by an authorized service provider arranged by Valpro Warranty Support at 1-813-502-0300. Contact Valpro Support to initiate and dispatch warranty service. 1-888-VALPRO-8 / 1-813-502-0300...
Page 32
Service, Installation & Care Manual CONDITIONS: All service under this warranty, for either labor or parts, must be performed by an authorized service provider arranged by Valpro Warranty Support at 1-813-502-0300. Contact Valpro Support to initiate and dispatch warranty service. 1-888-VALPRO-8 / 1-813-502-0300...
Need help?
Do you have a question about the VP19R-HC and is the answer not in the manual?
Questions and answers