Red Mountain Valley 111401126 Assembly Instruction

Parts List:
NO.
A
B
C
D
E
1. Removable grate (C) and Pellet Chimney (D) are placed inside the fire pit shown in the picture.
2. Put the Guide Ring (B) on top of the fire pit.
3. Spread out the three support legs to protect the table top from excessive heat.
4. The Heat Shield Plate (E) acts as a non‐slip barrier while keeping out heat.
5. Put the wood or pellets between Removable Grate(C) and Pellet Chimney (D).
6. Put the Kindling block into Pellet Chimney (D).
7. Ignite the kindling block until the wood burns.
Note: Pellet or wood can be placed inside the fire to use.

Never leave the hot fire pit unwatched.

Do not move the unit during use.

Do not put away the fire pit until it has cooled down.

The fire pit should be used together with Heat Shield Plate to avoid scalding table top surface.

Fire pit gets very hot. Keep children and animals away when in use.

After fire pit has cooled, remove the Guide Ring, chimney, and grate. Check to ensure the ash has
been extinguished, and dispose. Re‐install the internal parts of the fire pit, fold the three legs,
and place it in the carry bag.
Assembly Instruction
Tabletop Smokeless Fire Pit
ITEM#: 111401126
Description
Body
Guide Ring
Removable Grate
Pellet Chimney
Heat Shield Plate
WARNINGS
Qty.
1
1
1
1
1