Taking Pictures - D-Link DSC-100 User Manual

Taking Pictures

Make sure the camera power is on. Set the mode to your desired
preference. Locat the subject you want to shoot by looking through the
viewfinder.
Note: If you don't use the camera for 30 seconds, the DSC-100 will
automatically power off.
Note: The focus range for PC Camera/Webcam mode is 30cm (Macro)
to 1.5 Meters.
If you are using the DSC-100 for...
Digital Still Photos
§ Press the Power button for 3 seconds to power on the camera.
(The LED light on the rear panel will turn green)
§ Using Viewfinder to locate the object, press the shutter release
button to take pictures. The image processing time is around 1
second only
Video Recording
§ Press the Mode button until the Video Recording icon is
shown.
§ Using Viewfinder to locate the object, press and hold the
Shutter Release button.
§ The camera will take a continuous video until you release the
shutter button.
PC Camera/Webcam
§ Connect your camera to your PC. The camera will
automatically power on and switch to PC camera mode.
§ Run a webcam application such as NetMeeting (available with
Windows 98, Me, 2000 and included in this package).
§ Adjust the focus ring to get a clear image.
9