D-Link DCS-2132L-ES Quick Install Manual

Indoor hd wi-fi camera

Download this manual

Indoor HD Wi-Fi Camera

Quick Install Guide

What's in the box

• DCS-2132L-ES Indoor HD Camera

• CAT-5 Ethernet Cable

• Power Adapter

Web-based Configuration Utility Requirements

Computer or Mobile Device with the following:

• A Windows®, Macintosh (macOS), Android, or Linux-based system

• Wireless adapter or Wi-Fi functionality

Browser Requirements:

• Internet Explorer 7 or later

• Firefox 12.0 or later

• Safari 4 or later

• Google Chrome 20.0 or later

LED Indicator DCS-2132L-ES

This indicates the current status of the DAP-2132L-ES, as detailed in the table below.

Important Notes

• We recommend using this product with the embedded web application or third-party apps.

This product CANNOT use with Sage by Hughes since it was discontinued by EchoStar;

setup wizard and mydlink account provided by D-Link are NOT supported by this product

• Latency may be observed depends on the bandwidth of your wireless network

• Minimize the number of walls and ceilings between your router and the camera

Red Solid:

• Power on process

• During FW upgrade

Green:

• Blinking - During connection process

• Solid - Successfully connected to the

network

Off: The device is power off

Page 1 This product CANNOT use with Sage by Hughes since it was discontinued by EchoStar; setup wizard and mydlink account provided by D-Link are NOT supported by this product • Latency may be observed depends on the bandwidth of your wireless network...
Page 2 Initial Setup 1. Connect the included Ethernet cable to the Ethernet port located on the back of the DCS-2132L and connect it to your router 2. Attach the external power supply to the DC Power receptor located on the rear panel of the DCS-2132L and connect it to your wall outlet or power strip 3.
Page 3 Upon successful setup, you can access live video stream by following the instructions below: 4. Connect your computer or mobile device to the wireless network that DCS- 2132L-ES is configured, and find out the IP address of DCS-2132L-ES (You may need to consult with your network provider regarding this) 5.
Page 4 Why can’t I access the embedded web app? Unplug the DCS-2132L-ES from the power outlet for at least 10 seconds and plug it back in. Wait about 30 seconds and try accessing the embedded app again. If you have multiple computers, try connecting using a different computer.