Laser 7204 Instructions

Precautions
• Tighten in a steady and controlled manner and stop
applying pressure immediately the required setting
has been reached. Tightening too quickly or in a jerky
manner will result in an inaccurate final torque figure.
• Take care to stop applying further torque once the
desired setting has been reached. Over-torqueing can
damage the wrench.
• Do not adjust down to another torque setting; adjust
down to zero then back up to the desired torque setting.
• After using the wrench, unlock and turn the adjusting
lever to the lowest setting for storage. The lever will stop
when the lowest setting has been reached.
• Keep the breaker mechanism lubricated with HP grease.
• Never use the torque wrench to tighten a fastener to a
higher torque than the maximum torque setting.
• Do not use the torque wrench as a breaker bar.
• Take care of the torque wrench and keep it clean; do not
store in areas of high temperature or humidity.
• Do not use any cleaning material or solvent that may
affect the grease in the breaker mechanism.
Warranty
Our warranty policy is one year from date of purchase.
Please register your date of purchase by going to:
www.lasertools.co.uk/product-registration
To register you will be asked for the following information:
Name and Address
Retailers Name and Town
Date of purchase (always keep receipt)
Part Number and Serial Number
The Serial Number can be found on your Certificate of
Conformance in accordance with ISO 6789-1.
Guarantee
If this product fails through faulty materials or workmanship, contact our service
department direct on: +44 (0) 1926 818186. Normal wear and tear are excluded as
are consumable items and abuse.
Distributed by The Tool Connection Ltd
Kineton Road, Southam, Warwickshire CV47 0DR
T +44 (0) 1926 815000 F +44 (0) 1926 815888
info@toolconnection.co.uk www.toolconnection.co.uk
Classic Torque Wrench
Push Thru' Reversible Drive
7204-9_Instructions_V4
7204 | 7205 | 7206 | 7207 | 7208 | 7209
Instructions
Please visit:
www.lasertools.co.uk/registration
for your online Guarantee Registration
www.lasertools.co.uk