Laser 4938 Quick Start Manual

SAE CONVEX (SINGLE) FLARE
Tube Diameter
4.75mm (3/16")
5.0mm
6.0mm
SAE CONCAVED (DOUBLE) FLARE
Tube Diameter
4.75mm (3/16")
5.0mm
6.0mm
DIN CONVEX FLARE
Tube Diameter
4.75mm (3/16")
5.0mm
6.0mm
SAE CONVEX FLARE SAE DOUBLE FLARE
Consult the chart and the diagrams above and select the die specified to produce the required flare
on the diameter of brake pipe specified.
Distributed by The Tool Connection Ltd
Kineton Road, Southam, Warwickshire CV47 0DR
T +44 (0) 1926 815000 F +44 (0) 1926 815888
info@toolconnection.co.uk www.toolconnection.co.uk
Punch Die Set
OP1 4.75/5 4.75 SAE END
OP1 4.75/5 5.0 SAE END
OP1 6.0 6.0 SAE END
Punch Die Set
OP1 4.75/5 4.75 SAE
OP1 4.75/5 5.0 SAE
OP1 6.0 6.0 SAE
Punch Die Set
DIN 4.75/5.0 4.75 DIN END
DIN 4.75/5.0 5.0 DIN END
DIN 6 6.0 DIN END
DIN CONVEX FLARE
Brake Flaring Tool Set | Hydraulic
Flares pipe sizes 4.75mm (3/16") | 5mm | 6mm
This tool utilises a patented design to quickly produce high quality SAE and DIN flares on
or off the vehicle. The 4938 can produce flares on Cupro-Nickel and steel pipe as well as
coated steel piping.
The 4938 is designed to flare
4.75mm (3/16"), 5mm and 6mm
pipes by using the correct size
die and punch set supplied.
Contents
D
A. 1 x pair 4.75mm (3/16") Dies
B. 1 x pair 5mm Dies
C. 1 x pair 6mm Dies
D. 1 x "Operation 1" 4.75 (3/16") | 5mm punch (SAE)
E. 1 x "Operation 1" 6mm punch (SAE)
F. 1 x "Operation 2" 4.75 (3/16") | 5mm punch (SAE)
G. 1 x DIN 4.75/5mm punch
H. 1 x DIN 6mm punch
I. 1 x Yoke unit with handle
J. 1 x Hydraulic Ram
K. 1 x Mechanical Force Screw
www.lasertools.co.uk
K
J
A B C
I
E F G H
4938