Line Redirection; Redirecting A Line; Canceling Line Redirection - Norstar PLUS Modular ICS 1.1 System Coordinator Manual

• •
•
•
•
•
•
• •
Line Redirection /
165
Line Redirection
!Feature
I[]
EJ
Redirecting a line
Line Redirection lets you send your external calls to a telephone
outside the office. You may choose to redirect all your external lines
or only some of them .
1. Press
!Feature
I[]
EJ .
2. Select the outgoing line to be used for redirected calls.
3. Enter the number to which calls will be redirected.
4. Select the lines to be redirected.
Canceling Line Redirection
You can cancel Line Redirection .
!Feature
I
[D []
EJ
1. Press
!Feature
I
ID[] El.
2. Select the lines that redirection is to be canceled for.
Displays while redirecting lines
9.:_
QUIT BKSP
OK
Recess den i ed
Denied In
adMin
El"lter
di9its
QulT OK
Continue entering digits. Pressl14•1
!i!~I
or fil§e
to delete incorrect digits. Press
!Hold
I
or
OK when you
are
finished.
You cannot perform line redirection on an
M7100 telephone.
Line Redirection is not allowed on your
telephone. See your system coordinator.
Enter the telephone number to which you
wish to redirect calls using one of the
following methods:
Press an external autodial button.
Enter an external telephone number {max 24
digits) then press
I Hold
I
or
OK.
Press lt1o1<1 I or OK if the line you have
chosen as the outgoing line is a private
network line that does not require you to dial
digits .
P0838263 Issue 02
page 165 of 266
Modular ICS 1.1 System Coordinator Guide