Dialing Modes; Choosing A Dialing Mode - Norstar PLUS Modular ICS 1.1 System Coordinator Manual

152
I
Dialing modes
Dialing modes
!Featu re
I ~
ID ID
Your Norstar telephone has three dialing modes: Automatic Dial,
Pre-Dial, and Standard Dial. All three modes support on-hook
dialing. (On-hook dialing means dialing a call without picking up the
receiver.} The special features of the Automatic and Pre-Dial modes
are available only when you dial on-hook.
Standard Dial lets you make a call by s,electing a line and dialing the
number. If you have a prime line, it is selected automatically when
you lift the receiver or press
I
H•11?J~"·
I.
Automatic Dial lets you dial a number without selecting a line. Your
prime line is selected as soon as you start dialing a number.
Automatic Dial does not work if your telephone has no prime line or
if your prime line is in use .
Pre-Dial lets you enter a telephone number, check it, then change it
before actually making the call. The call is not dialed until you select
a line or line pool, or pick up the receiver. You can pre-dial both
external and internal numbers. You must, however, select the
correct type of line (external or internal) for the type of number you
have entered.
Choosing a dialing mode
You can set the dialing mode of your telephone.
1. Press
!Feature
I~
ID ID .
2. Choose the dialing mode you want.
Displays
St.andard dial
NEXT OK
The current dialing mode is shown. Press
[!]
or NEXT until the dialing mode you want
appears. Press
!Hotd
I
or
OK
to select the
displayed dialing mode.
Modular ICS 1.1 Systom Coordinator Gulde
page 15:2 of 266
P0838263 Issue 02
•
•
•
•
•
• •
•
•
• •
• •
• •
• •
• •
• •
• •
•
•
• •
•
•