IDENTIFYING PARTS Components A. Tabletop x2 (A1 = Small Tabletop) C. Allen Cap Screws x18 B. Table Legs x6 D. Allen Key x1 (B1 = Small Table Legs x3)
Page 4
INSTRUCTIONS FOR USE ASSEMBLY INSTRUCTIONS Important Note: When tightening any fasteners, ensure not to tighten them more than 90% tightness to prevent damage to the product or the fastener. Step 1: Repeat this step for both tables. 1. Turn the Tabletop (A) upside down and place it on a flat surface.
CLEANING AND CARE INSTRUCTIONS - GENERAL • Cleaning: Wipe down the product’s surface using a thickly folded damp cloth. • Do not use harsh or abrasive cleaning chemicals or materials on the product; doing so may damage or scratch the surface finish. •...
ENVIRONMENTALLY FRIENDLY DISPOSAL IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH THE EUROPEAN DIRECTIVE ON WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT. • At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service.
WARRANTY The Everfurn Bohemian Nesting Coffee Tables includes a standard 12-month limited warranty against manufacturing defects and faults. Should the product be unboxed with any faulty parts, poor finishing, visible damage, or failure to perform due to a manufacturing defect or...
Need help?
Do you have a question about the Bohemian Nesting FD-CT-14 and is the answer not in the manual?
Questions and answers