Subscribe to Our Youtube Channel
Related Manuals for Toro Flex-Force Power System 60V MAX 51821
Summary of Contents for Toro Flex-Force Power System 60V MAX 51821
- Page 1 Form No. 3460-495 Rev B Flex-Force Power System ™ MAX Axial Blower Model No. 51821—Serial No. 323000001 and Up Model No. 51821T—Serial No. 323000001 and Up *3460-495* Register at www.Toro.com. Original Instructions (EN)
- Page 2 Whenever you need service, genuine Toro parts, or For assistance, please see additional information, contact an Authorized Service www.Toro.com/support Dealer or Toro Customer Service and have the model for instructional videos and serial numbers of your product ready. Figure 1...
-
Page 3: Safety Alert Symbol
II. Preparation Keep bystanders and children away from the operating area. Use only the battery pack specified by Toro. Using other accessories and attachments may increase the risk of injury and fire. Plugging the battery charger into an outlet that is not 120 V can cause a fire or electric shock. - Page 4 Replace the battery pack with a genuine the tool for purposes other an its intended use Toro battery pack only; using another type of could prove dangerous to you and bystanders. battery pack may cause a fire or risk of injury.
- Page 5 IV. Maintenance and Storage Maintain the tool with care—Keep it clean and in good repair for best performance and to reduce the risk of injury. Follow the instructions for lubricating and changing accessories. Keep handles dry, clean, and free from oil and grease. When the battery pack is not in use, keep it away from metal objects such as paper clips, coins, keys, nails, and screws that can make...
-
Page 6: Safety And Instructional Decals
Safety and Instructional Decals Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. Replace any decal that is damaged or missing. decal144-3098 144-3098 decal144-3094 144-3094 1. The battery pack is 3. - Page 7 decal137-9461 137-9461 1. Battery charge status decal144-3081 144-3081 1. Warning—read the 3. Thrown object Operator’s Manual; stay hazard—keep bystanders away from moving parts; away. keep all guards and shields in place; wear eye protection; do not expose to rain. 2. Warning—keep bystanders away from the machine in all directions.
-
Page 8: Product Overview
Setup Product Overview Important: The battery pack is not fully charged when you purchase it. Before using the tool for the first time, refer to Charging the Battery Pack (page 11). Assembling the Blower Slide the blower tube onto the blower housing. You may need to press down on the tube latch for the blower tube to lock into place (Figure... -
Page 9: Specifications
Specifications (page your Authorized Service Dealer or authorized Toro Make sure that the vents on the blower are clear distributor or go to www.Toro.com for a list of all of any dust and debris. approved attachments and accessories. Align the cavity on the battery pack with the... - Page 10 Adjusting the Air Speed of the Blower To achieve maximum performance (air speed), fully depress the variable-speed trigger, then press and hold the turbo boost button for the desired amount of time (Figure To adjust the air speed as you blow, use the variable-speed trigger (Figure To maintain the current air speed, engage the speed...
-
Page 11: Charging The Battery Pack
Slide the charger into the battery pack until it is fully seated (Figure 10). To remove the charger, slide the charger backward out of the battery. Refer to the following table to interpret the LED indicator light on the battery charger. Indicator Indicates light... - Page 12 If you are located outside of the US • Do not store the tool with the battery pack installed. and Canada, please contact your authorized Toro distributor. • Clean all foreign material from the product. • When not in use, store the tool, battery pack, and battery charger out of the reach of children.
-
Page 13: Troubleshooting
Troubleshooting Perform only the steps described in these instructions. All further inspection, maintenance, and repair work must be performed by an authorized service center or a similarly qualified specialist if you cannot solve the problem yourself. Always remove the battery from the tool when troubleshooting, inspecting, maintaining, or cleaning the tool. Problem Possible Cause Corrective Action... - Page 14 Problem Possible Cause Corrective Action The LED indicator light on the battery 1. There is an error in the communication 1. Remove the battery pack from the charger is blinking red. between the battery pack and the battery charger, unplug the battery charger.
- Page 15 California Proposition 65 Warning Information What is this warning? You may see a product for sale that has a warning label like the following: WARNING: Cancer and Reproductive Harm—www.p65Warnings.ca.gov. What is Prop 65? Prop 65 applies to any company operating in California, selling products in California, or manufacturing products that may be sold in or brought into California.
Need help?
Do you have a question about the Flex-Force Power System 60V MAX 51821 and is the answer not in the manual?
Questions and answers