Sony STR-K900 - Fm Stereo/fm-am Receiver Service Manual page 11

Name Function
Numeric
Press ALT (G) and then press
buttons
the numeric buttons to
– preset/tune to preset
stations.
– select track numbers of the
CD player, VCD player, LD
player, DVD player, MD
deck, DAT deck, or tape
deck. Press 0/10 to select
track number 10.
– select channel numbers of
the TV, VCR, satellite tuner,
Blu-ray disc recorder, hard
disc recorder, or PSX.
>10/11
Press ALT (G) and then press
>10/11 to select track
numbers over 10 of the CD
player, VCD player, LD
player, MD deck, tape deck,
TV, VCR, Blu-ray disc
recorder, hard disc recorder,
PSX, or satellite tuner.
wj Input buttons Press one of the buttons to
select the component you
want to use. When you press
any of the input buttons, the
receiver turns on. The buttons
are factory assigned to control
Sony components as follows.
You can program the remote
to control non-Sony
components following the
steps in "Programming the
remote".
Button
VIDEO1
VIDEO2
VIDEO3
DVD
MD/TAPE MD deck
SA-CD/CD Super Audio CD/CD
TUNER
AUX*
* The AUX button is not available
for receiver operation.
Name
wk TV ?/1
wl RM SET UP
a)
The MASTER VOL +, TV VOL +, TV CH + and
H buttons have tactile dots. Use the tactile dots as
references when operating the receiver.
Notes
Some functions explained in this section may not
work depending on the model.
The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
The AUX and 12 buttons on the remote are not
available for receiver operation.
Assigned Sony
component
VCR (VTR mode 3)
VCR (VTR mode 1)
VCR (VTR mode 2)
DVD player
player
Built-in tuner
Not assigned
STR-K880/K900
Function
Press to turn the TV on or off.
Press to set up the remote.
11