Sony STR-K402 Service Manual

SERVICE MANUAL
Ver 1.0 2001. 04
Manufactured under license from Dolby Laboratories Licensing
Corporation.
"DOLBY" the double-D symbol ; "AC-3" and "Pro Logic" are
trademarks of Dolby Laboratories Licensing Corporation.
AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND
TOTAL HARMONIC
DISTORTION:
With 8 ohm loads, both
channels driven, from 40 -
20,000 Hz; rated 80 watts
per channel minimum RMS
power, with no more than
0.09% total harmonic
distortion from 250
milliwatts to rated output
Amplifier section
POWER OUTPUT
Rated Power Output at Stereo mode
(8 ohms 40 Hz - 20 kHz, THD 0.09%)
80 W + 80 W
Reference Power Output
(8 ohms 1 kHz, THD 0.7%)
1)
Front : 80 W/ch
1)
Center : 80 W
1)
Surround : 80 W/ch
Sony Corporation
9-873-895-11
2001D1600-1 Home Audio Company
© 2001.4
Shinagawa Tec Service Manual Production Group
SPECIFICATIONS
1) Depending on the sound field settings and
the sources, there may be no sound output.
Frequency response
MULTI CH IN, CD,
MD/TAPE, DVD/LD,
TV/SAT, VIDEO:
20 Hz – 20 kHz
0/– 0.5 dB (sound field,
and tone bypassed)
Inputs (Analog)
MULTI CH IN, CD,
MD/TAPE, DVD/LD,
TV/SAT, VIDEO:
Sensitivity: 250 mV
Impedance:
50 kilohms
2)
S/N : 85 dB
3)
(A, 250 mV )
2) INPUT SHORT
3) Weighted network, input level
Inputs (Digital)
DVD/LD (coaxial):
Sensitivity: –
Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
TV/SAT (Optical):
Sensitivity: –
STR-K402
Impedance: –
S/N: 100 dB
(A, 20 kHz LPF)
MD/TAPE (OUT):
Outputs
VIDEO (AUDIO OUT):
Voltages: 250 mV,
Impedance:
10 kilohms
SUB WOOFER:
Voltage: 2 V
Impedance :
1 kilohms
PHONES:
Accepts low– and
high-impedance
headphones
±6 dB at 100 Hz
TONE
and 10 kHz
Sampling frequency
48 kHz (OPTICAL IN)
96 kHz (COAXIAL IN)
FM tuner section
Tuning range 87.5 - 108.0 MHz
Antenna terminals
75 ohms, unbalanced
FM STEREO FM-AM RECEIVER
US Model
Intermediate
frequency 10.7 MHz
Mono: 18.3 dBf,
Sensitivity
2.2 µV/75 ohms
Stereo: 38.3 dBf,
22.5 µV/75 ohms
Usable sensitivity
11.2 dBf, 1 µV/75 ohms
Mono: 76 dB
S/N
Stereo: 70 dB
Harmonic distortion at 1 kHz
Mono: 0.3%
Stereo: 0.5%
Separation 45 dB at 1 kHz
Frequency response
30 Hz - 15 kHz
+0.5/-2 dB
Selectivity 60 dB at 400 kHz
— Continued on next page —