Subscribe to Our Youtube Channel
Related Manuals for KINGrinder K4
Summary of Contents for KINGrinder K4
- Page 1 WHAT’S IN THE BOX Grinder KINGRINDER MANUAL HAND COFFEE GRINDER Handle - Manual - K4/K6 PC Lid with black O ring White O ring & Circlip Brush...
- Page 2 HOW TO OPERATE THE GRINDER? 1.Gently rotate the adjustment nut clockwise till Stop to zero.When turn it to the 0 position for the last time, it is the correct position. Do not lock too tightly. 2.Rotate the adjustment nut anti-clockwise to the grinding click numbers. (Please refer to the advised grinding clicks below.) 3.Put 30-35g coffee beans into the grinder.
- Page 3 HOW TO CLEAN THE GRINDER? Disassemble: 1. Rotate the adjustment nut anti-clockwise for a coarser grind. 2. Hold down the burr set and remove the circlip. 3. Take out the components in order. The burr set (attached with the central shaft), the bearing cover and the spring from the burr set.
- Page 4 HOW TO USE IT BY ELECTRIC? You need to prepare: Electric screwdriver at a 15-25 torque. 6.35mm(1/4 inch) Hex Shank. Insert the Hex Shank, grasp the Separate the PC lid and handle, grinder firmly, and gradually power it then install the black O-ring. on.
Need help?
Do you have a question about the K4 and is the answer not in the manual?
Questions and answers