Page 1
O W N E R ’ S M A N U A L V E R S I O N 0 7 1 0 2 0 2 4 Solo System...
Page 2
Congratulations! You are now the owner of a Solo® portable sauna. With Sunlighten infrared light, you are empowered to improve your quality of life. Follow our assembly instructions and sauna protocol to begin your wellness journey with the very best in infrared therapy.
COMPONENT LIST Solo Upper Dome Solo Lower Dome Solo Control Box Chromotherapy Remote SoloPad SoloPad Controller Solo Pillow Solo Curtain SPECIFICATIONS SOLO Dimensions 69” x 28” x 18” (W x L x H) 1,752.6mm x 711.2mm x 457.2mm Weight 46 lbs. (21 kg)
Solo, immediately turn it off at the control box. Keep control box within reach when using the Solo. Do not use near water. Always use a grounded electrical receptacle. Infrared waves are most effective when they can contact bare skin, making it most effective to get undressed before using the Solo System.
UNBOXING GUIDE PARTS & PIECES Your Solo System will ship packaged in a larger outer box to protect it from damage in transit, containing a smaller box. This will include the two dome sections, a pillow pad and electronics, nested inside the smaller dome.
Place the lower dome (the smaller of the two) on the floor where you plan your feet to be while lying on the pad. Insert the narrow side of the pad into the lower Solo dome with the upper cushions and connected controller.
CURTAIN & NECK PAD Your Solo curtain can be found rolled and taped to the control box packaging. The label will read ‘Spungi bamboo carbon towels.’ It will attach to a velcro strip inside the lip of the upper dome, along its edge.
SoloPad. Then unbox your control box. The main powering cable is 120 volts (UK 230V) and goes in the outlet. Unlike our cabin units, the Solo is portable and doesn’t require a dedicated electrical circuit. The connector labeled ‘Upper US’ will plug into the upper dome’s corresponding receptacle, and...
2. Temperature range is from 113-149° Fahrenheit (45-65° Celsius). 3. Set the timer on the control box. The maximum time that the Solo can be set for is 60 minutes at 1 minute intervals.
SOLOPAD CONTROLS 1. Unfold SoloPad onto a solid surface 2. Plug the SoloPad power cord into an outlet 3. Press the power button on the remote 4. Set the temperature intensity (0-9) by pressing the up and down arrows on the lower half of the remote 5.
Color selection Chromotherapy Remote Make sure your chromotherapy remote has a battery in it. During installation of your Solo domes, connect the chromotherapy light strip that arches above the edge of the upper dome to the control box. You will need to point the remote at the control box to operate your lights.
• Position your head on the pillow so that you are comfortable. The pillow should be positioned outside of the Solo domes. • Close the drop curtain to retain the heat within the Solo. It is now time to relax and enjoy the soothing heat.
SAUNA PROTOCOL Follow this quick guide for the optimal sauna experience. PRE SAUNA SESSION • Hydrate with at least 8 oz (.24 L) of water to prepare your body for an increase in core temperature. • Pre-heat for approx. 30 minutes. Increase pre-heat time to reach higher temperatures.
Are the EMF levels safe? Yes. SoloCarbon panels are 100% quality controlled by Sunlighten to ensure the safety and effectiveness of each individual heater. Our proprietary heater design virtually eliminates EMF (an average of less than 3mg) and steel conduit electrical shielding making your sauna as safe as possible.
• When unplugged, SoloPad may be wiped down with a damp cloth or an all natural disinfectant, being sure not to get the power cords wet. Sunlighten Natural Cleaner is an effective, natural and non-toxic cleaner that can be used on the SoloPad.
TESTED & CERTIFIED Sunlighten has quality control measures in place at every step of the production process to ensure you have the best product possible. We subject our designs to rigorous health and safety inspections, including third-party tests and certifications.
90 days from delivery. Labor and technician costs are not covered. Sunlighten warrants the sauna to be free of material and workmanship defects. This warranty applies only to the original purchaser and ends if ownership is transferred. The sauna must be purchased and used within one year of its manufacture date.
A return is not an option if any part of any carton has been opened. Buyer may cancel and return their sauna to Sunlighten subject to the terms and conditions of this policy. Buyer needs to provide written notice to Sunlighten via email within thirty (30) days of receipt of their sauna. Send the email to your sales rep and cc: customercare@sunlighten.com or if purchased via the online store, send...
Page 22
ETL SAFETY CERTIFIED The ETL Listed Mark is proof of product compliance (electrical, gas and other safety standards) to North American safety standards. Authorities Having Jurisdiction (AHJ’s) in 50 states and Canada and retailers accept the ETL Listed Mark as proof of product safety.
Page 24
V E R S I O N 0 7 1 0 2 0 2 4 US / CAN 7373 W. 107th St. | Overland Park, KS 66212 913.754.0831 | sunlighten.com Toll Free: 877.292.0020 International sunlighten.com or contact your local Sunlighten representative...
Need help?
Do you have a question about the Solo and is the answer not in the manual?
Questions and answers