Download Print this page

My Pet Command MPC150 Operating And Training Manual

Wireless indoor pet barrier

Advertisement

Quick Links

MPC150 Wireless Indoor Pet Barrier
www.mypetcommand.com
Email: - Sales@mypetcommand.com Tel USA: - 888 686 6495
Tel Australia: - 1300 416 703
Tel UK: - 020 3936 1156

Advertisement

loading
Need help?

Need help?

Do you have a question about the MPC150 and is the answer not in the manual?

Questions and answers

Joyce Flood
June 28, 2025

How long is the fence transmitted so supposed to beep when it's plugged in

Subscribe to Our Youtube Channel

Summary of Contents for My Pet Command MPC150

  • Page 1 MPC150 Wireless Indoor Pet Barrier www.mypetcommand.com Email: - Sales@mypetcommand.com Tel USA: - 888 686 6495 Tel Australia: - 1300 416 703 Tel UK: - 020 3936 1156...
  • Page 5 50*Whistle MPC150 Wireless Indoor Pet Barrier www.mypetcommand.com Email: - Sales@mypetcommand.com Tel USA: - 888 686 6495 Tel Australia: - 1300 416 703 Tel UK: - 020 3936 1156...
  • Page 6 The MPC150 indoor pet barrier keeps your pet away from a certain room, away from trash, off of furniture etc.… just Place the barrier transmitter near the area your pet should avoid. The Barrier Transmitter creates a circular radio signal hidden fence adjustable from approx 1-8 ft in Radius.
  • Page 7 If you don’t want any static correction use plastic covers or use the collar in mode 2. Please note the MPC150 Pet Barrier has been proven safe, comfortable and effective for pets at least 6 months old weighing in at 5 pounds or more. It is not recommended that any pet wears these type of collars for more than 12 hours at a time.
  • Page 8 Barrier Transmitter: Transmits the wireless radio signal Barrier Area: Area that you wan to prevent your pet from gaining access to Receiver Collar: Receives the radio signal from the Barrier Transmitter. Contact Points: deliever the safe Progressive Static Correction when your pet enters the Barrier Area Progressive Static Correction (Mode 1): - when collar enters the radio hidden fence boundary the collar will work as follows: -...
  • Page 10 1 beeps...
  • Page 13 Hold the ON/OFF button untill it beeps once Hold the ON/OFF button untill it beeps twice to turn off.
  • Page 15 2.Turn the Barrier Transmitter ON by pressing the UP (+) button until there is a dog and bar(s) displayed in the LCD window. 3.Push the switch to A, there is dog A and bar(s) displayed in the LCD window then start the receiver collar, it automatically enters into code matching mode in 15 seconds, If the receiver collar beeps, it means code match succeeds.
  • Page 16 MPC150...
  • Page 18 Any Help/support make contact with us at: www.mypetcommand.com Email: - Sales@mypetcommand.com Tel USA: - 888 686 6495 Tel Australia: - 1300 416 703 Tel UK: - 020 3936 1156...