My Pet Command MPCGPS3 Quick Start Manual

Thank you for your purchase of our MPCGPS3. Always read the full Manual and this Card
first before use
Please note the collar connects to your Smartphone via Bluetooth (Short Range only up to
approx. 10-15FT) Make sure Bluetooth as well as location services are ON in your
Smartphone settings for connection to take place. Also Make sure Bluetooth discovery is
ON in the collar. Tap front button and you will see Blue Flash for Bluetooth discovery to
be ON
Important: - you only need to be connected to the collar for purposes of setting up and
testing your fence only when your collar and smartphone are next to each other.
Please note no fences are stored on the APP and all fences are stored in the collar Memory
Once the collar has the fence saved, the collar works independent of the APP (And
connects to GPS satellites in the sky above only) on its own and it's not meant to be
connected to the APP and please note this is not an online tracking collar.
If you have more than 1 Collar, you connect to one collar, one at a time to setup each
collar individually and download/save fence.
Please always allow about 25FT space from house Boundary walls to the start of any
fence lines (Not Made for small yards). Also allow 5-25Ft Variance for Positioning due to
GPS Satellite Positioning
Test/Setup Procedure is: -
1.) Setup your fence with connected Collar. Also activate Fence Switch to ON and we
recommend Alarm level 3 (Refer to Manual on levels). Collar LED will blink Either
red/Green when fence is activated
READ FIRST