Related Manuals for Olarm PRO
Summary of Contents for Olarm PRO
-
Page 1: Table Of Contents
Step 1 - Locate your alarm panel Step 2 - Unbox your Olarm PRO Step 3 - Download the Olarm mobile app & register your device Step 4 - Power down the alarm panel Step 5 - Connect the connector cable... -
Page 2: Supported Models
Note that the alarm panel is not the keypad. Alarm panels are typically installed in a hidden location in the home such as a cupboard or basement. Step 2 - Unbox your Olarm PRO The Olarm PRO box includes the following:... -
Page 3: Step 3 - Download The Olarm Mobile App & Register Your Device
Step 3 - Download the Olarm mobile app & register your device Scan the QR code (left), or navigate to your App store on your device and search for ‘Olarm’. This Olarm PRO will require an active subscription to function. Please contact your installer or speak to sales@olarm.com for more information. -
Page 4: Paradox Mg5050
Step 6 - Power up the alarm panel Power up your Paradox alarm panel by reconnecting the battery and plugging the transformer back into the power source. The Olarm PRO should light up as per the next step. Step 7 - Check your Olarm PRO’s status... -
Page 5: Troubleshooting The Led States
If your device LED is red - please check the connection between the Olarm PRO and the alarm panel. If your device LED is orange - please ensure that the Olarm PRO is located in an area with good mobile signal strength and away from any metal enclosures that could be interfering with the signal. -
Page 6: Step 8 - Mount The Olarm Pro
Do NOT install the Olarm PRO inside the alarm panel box. The Olarm PRO device is NOT weather resistant, and you will need to install it in a suitable non-metal enclosure if outdoors. -
Page 7: Final Checklist
Final Checklist Olarm recommends that the following checklist be used to ensure that all aspects of the installation have been covered. Installation Position Have I mounted the Olarm PRO securely away from the alarm panel to ensure minimal signal interference? - Page 8 Panic Alarm Signal Control Room Signal Check Have I checked with the control room that the monitoring software recorded the signals? Control Room: Disarm Panic Alarm Signal Olarm PRO and Paradox SP65 Installation Olarm PRO and Paradox SP65 Installation https://help.olarm.com/portal/en/kb/articles/paradox...
- Page 9 Olarm PRO and Paradox SP6000 Installation Olarm PRO and Paradox SP6000 Installation Olarm PRO and Paradox MG5050 Installation Olarm PRO and Paradox MG5050 Installation If you have any problems, please feel free to contact Olarm Support Phone: +27 21 009 0911 Email: support@olarm.com WhatsApp: +27 60 039 0911 ...
Need help?
Do you have a question about the PRO and is the answer not in the manual?
Questions and answers