Advertisement
Advertisement
Table of Contents
Related Manuals for ROBOfiber FC-1002-PSE
Summary of Contents for ROBOfiber FC-1002-PSE
- Page 1 FC-1002-PSE PoE+ PSE Ethernet Media Converter User Manual www.robofiber.com...
- Page 2 5. FX：Optical Fiber Port Speed Settings ❖ Power Supply Specifications Item Specification Power Input 48-56V Operating Voltage 3W Max(Without PoE Load) Power Consumption Overload Current Protection AC Plug Types © 2024 ROBOfiber, Inc. All right reserved Page 2 of 8...
- Page 3 Assignment MDI Signal Definition MDIX Signal Definition MDI Signal Definition MDIX Signal Definition BI_DA+ BI_DB+ BI_DA- BI_DB- BI_DB+ BI_DA+ BI_DC+ BI_DD+ BI_DC- BI_DD- BI_DB- BI_DA- BI_DD+ BI_DC+ BI_DD- BI_DC- Page 3 of 8 © 2024 ROBOfiber, Inc. All right reserved...
- Page 4 The PoE system was physically implemented under the specification of IEEE 802.3af-2003. Also, we know that there are two categories for the RJ45 color code - T568A and T568B. Page 4 of 8 © 2024 ROBOfiber, Inc. All right reserved...
-
Page 5: Installation
Avoid aerial cable lengths, cables cannot hold themselves; 8. Fiber Pigtails cannot be tied and should be bended as less as possible. Bending radius cannot be too small (small radius causes high fiber loss link). Page 5 of 8 © 2024 ROBOfiber, Inc. All right reserved... -
Page 6: Cable Connection Parameter
Multimode Fiber Sigle-mode Fiber Bandwidth MHZ- Bandwidth MHZ-KM Distance Distance 1000Base- SX(850nm） 220m 500m 275m 550m Single-mode Fiber 9/125um:2km 1000Base-LX Single-mode Transceiver 1310nm: 10/20km (1310nm/1550nm） Single-mode Transceiver 1550nm: 40-120km Page 6 of 8 © 2024 ROBOfiber, Inc. All right reserved... -
Page 7: Specifications
5 to 95% noncondensing Altitude ＜3000m(＜10000 ft.) MTBF 100,819 Hours MTBF Standard Telcordia SR-332 GB 25℃ Heat Dissipation 113 BTU/h （With 30W PoE） Cooling Passive Cooling Noise Level 0 dBA Page 7 of 8 © 2024 ROBOfiber, Inc. All right reserved... -
Page 8: Regulatory Information
Radio Interference Regulation of Industry Canada. 1.3 Disclaimer ROBOfiber, Inc. shall not be liable for damages of any kind, including, but not limited to, punitive, consequential or cost of cover damages, resulting from any errors in the product information or specifications set forth in this document and ROBOfiber Inc.
Need help?
Do you have a question about the FC-1002-PSE and is the answer not in the manual?
Questions and answers