Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Nero Manuals
  4. Plumbing Product
  5. Zen SS316L
  6. Quick start manual

Nero Zen SS316L Quick Start Manual

Freestanding bath mixer
Hide thumbs Also See for Zen SS316L:
1
2
3
4
5
6

Advertisement

Quick Links

Download this manual
Zen SS316L
Freestanding
Bath Mixer
Versions:202405
Drawing
300
Ø44.5
WM-060073
Ø26
Finish & SKU
With Outdoor Shower Hose
NR162203a01BZ
NR162203a01BG
With PVC Shower Hose
NR162203a02BZ
NR162203a02BG
Ø160
1x Mixer Tap
1x Straight Pipe
1x Decorative Cover
2x Water Pipes
1x Mixer Box
1x Hand Shower(built-in Check Valve)
1x Shower Hose
2x Gloves
1x Allen Key Set
NR162203a01GR
NR162203a01BN
NR162203a02GR
NR162203a02BN

Advertisement

loading
Need help?

Need help?

Do you have a question about the Zen SS316L and is the answer not in the manual?

Questions and answers

Related Manuals for Nero Zen SS316L

Summary of Contents for Nero Zen SS316L

  • Page 1 Zen SS316L Freestanding Bath Mixer Versions:202405 Drawing 1x Mixer Tap 1x Straight Pipe WM-060073 Ø26 1x Decorative Cover 2x Water Pipes 1x Mixer Box 1x Hand Shower(built-in Check Valve) 1x Shower Hose 2x Gloves 1x Allen Key Set Finish & SKU With Outdoor Shower Hose Ø44.5...

  • Page 2: General Instructions

    Installation Instruction GENERAL INSTRUCTIONS: - This product must be installed by a licensed plumber. Ensure that your plumbing installation conforms to the Australian/New Zealand Standard AS/NZS 3500. - All pipework must be thoroughly flushed prior to the installation of the mixer. In-line filters must be fitted on both hot and cold supplies to prevent foreign particles from damaging the ceramic cartridge.
  • Page 3 NOTE: To install the mixer, the floor thickness must be at least 50mm. If it is insufficient, the floor should be raised by at least 30mm before installation. 1. Mark the points according to the dimensions. 2. Drill holes in the floor oat the marked points, ensuring the distance from the bathtub to the concealed box is correct.
  • Page 4 Leveling Plate Spirit Level Testing Plugs 5. Protect the concealed box while filling the 6. Remove the screws and leveling plate, take floor around it. out the spirit level and test plugs. 7. Slide the decorative cover onto the straight 8.

  • Page 5: Maintenance And Care

    9. Use an H3 Allen Key to tighten the screws 10. Insert the inlet pipe into the corresponding through the straight pipe, connecting the fixed hole of the concealed box, adjust the position pipe and the straight pipe. of the spout outlet and the bathtub, and secure them with the concealed box.