Nikon Z6III Repair Manual
  1. Manuals
  2. Brands
  3. Nikon Manuals
  4. Digital Camera
  5. Z6III
  6. Repair manual
Nikon Z6III Repair Manual

Nikon Z6III Repair Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Nikon Z6III
Repair Manual
Ver.1.0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Z6III and is the answer not in the manual?

Questions and answers

Related Manuals for Nikon Z6III

Summary of Contents for Nikon Z6III

  • Page 1 Nikon Z6III Repair Manual Ver.1.0...

  • Page 2: Table Of Contents

    Safety precautions ...................... 4 Disclaimer of warranties and limitation of damages ........... 6 Notification ........................6 Service tools Nikon service tools ..................... 7 Standard service tools ....................7 Illustrated Service Parts List Parts Removal and Replacement Procedures Before disassembling the Product ................23 During the repairing ....................
  • Page 3 REAR FPC UNIT ..........................48 EYEPIECE BARREL UNIT ....................... 59 Assembly ........................63 EYEPIECE BARREL UNIT ....................... 63 TOP COVER ............................. 70 REAR COVER UNIT ......................... 71 REAR FPC UNIT ..........................79 HINGE UNIT ............................. 89 BACK DISPLAY COVER UNIT ......................90 REAR COVER UNIT .........................

  • Page 4: Introduction

    ● For purposes of this Repair Manual, "Nikon" means Nikon Corporation, and all direct and indirect affiliated companies, including without limitation, Nikon Inc. ● This Repair Manual is solely intended for Nikon products imported into and sold in the Unit- ed States by Nikon Inc.

  • Page 5: Notations Used In This Repair Manual

    For the camera serial numbers, refer to the documentation provided with the camera (the Reference Guide). ● The serial number may be required when you contact Nikon with CAUTION regards to the Product. Make sure not to lose the serial numbered...
  • Page 6 Read this first ● No part of this Repair Manual may be reproduced, transmitted, transcribed, stored in a re- trieval system, or translated into any language in any form, by any means, without Nikon's prior written permission. ● Illustrations shown in this Repair Manual may differ from the actual Product.

  • Page 7: Safety Precautions

    Product from being able to be attached and will cause problems when shooting. In such cases, accurate adjustments and repair will be required and it is recom- mended that you contact Nikon for service repairs. ● If the Product contains a lithium-ion battery, then inappropriate use, transportation, recycling, reuse, or disposal of the lithium-ion battery may cause a fire, explosion or other damage or injury.
  • Page 8 Safety policy and procedure ● All Product safety issues must be managed according to the following points. ● If any of the following conditions are visible, stop repairing the Product and contact Nikon's customer service at www.nikonproductsupport.com. – There are burnt or melted components or traces on the outside of the Product, or other heat-related damage (including scorching on charging terminals or other connection terminals).

  • Page 9: Disclaimer Of Warranties And Limitation Of Damages

    ● All the information, descriptions, materials, and products provided on or in connection with this Repair Manual are provided by Nikon on an "as-is basis" and in "the form that can only be provided if possible'' unless otherwise expressly specified in writing by Nikon. With re-...

  • Page 10: Service Tools

    This section shows the tools used to repair products. The standard service tools are commercially available and can be purchased from third party retailers. Nikon hereby disclaims all responsibility and liability for any tools or other items purchased from third party retailers.

  • Page 11: Illustrated Service Parts List

    Illustrated Service Parts List ● The parts marked in gray in the illustration cannot be replaced individually as replacing them will affect the camera function. If you need to replace these parts, use the CAMERA BODY UNIT (US) IMPORTANT (143UW). ●...
  • Page 12 1A-17035FA x2 6A-17045FD2 138NU 13J86 13W4W x2 1428S 13J9F 1380Y x3 13E8H 1384Y 13E8J 138R9 6A-17045FD2...
  • Page 13 13S9K 13D5F 13D5G（10） 138R9 x2 12H45 6A-17045FA 12H45 13J82 13J5H x2 13S7W 13D73 13D72 126ZG 127RF 12H45 x2 6A-17045FD2...
  • Page 14 13J7Y 13E8S 12H47 x3 13J7Z 12U6M x2 12S07 x2...
  • Page 15 12S2T x2 134BG x2 13H19 12H45 x2 134BG 138R9 x2 13J4V 13J80 12A8Y 13G2U 132C8 132C9 x2 13P0K 6A-17045FD2 138R9 13H2W H1-17060FD2 134BG 134BG x2 1382U x2 12S2T...
  • Page 16 1K100-035 12U2M-A0V322 13F09 1K685-799 140T1 13F58 1334K 12G7R 1K685-799 1K100-035 129S9-A0M96H...
  • Page 17 6A-17040FD2 13J7T 13Y47 13J7X...
  • Page 18 6A-17040FA 13G2D 6A-17050FD2 139RS 13E8P 1K010-830...
  • Page 19 129PR 129PT 12R6D x2 1355K 13J6U 127MZ 6A-17040FD2 x2 6A-17040FD2 x2 127N0 127N1 12P05 T1-01500SX1 127N2 12G6G 12H6M...
  • Page 20 142SG 1227B 122FN T2-02300SX1 1276Z 134N6 11A2T 13E5Z 134A8 x2 13D87 13D7L 13F5B 6A-14025FA x2 12Z11 13F0F 12Z83 13J7G 12Z13 1278Z 1278E 1317S 1276H 13F0G 114SA 13F49 1276G 1322P 13S3Y 13E6A 1276J 13D89 6A-17030FA 13J7H...
  • Page 21 13J7F 13J7C 12H46 13J7J 12R78 x2 13J79 1A-17035FD2 x3 134BK x2 142SG 13J95 6A-17040FA x3 13P0J 13G27 13H2X 6A-17045FA x2 13S78 13J7L 13P0H 13D86 11W3P 6A-17040FA x4 13D7Z 12A9R 6A-17035FD2 x6 6A-17035FD2...
  • Page 22 The parts highlighted in purple are not included with the CAMERA BODY UNIT (143UW) 143UW...
  • Page 23 Item code Parts name Q'ty 13J87 FIXING PLATE 13D4Y SPONGE 13J83 TRIPOD PLATE UNIT 1A-20050FD2 SCREW 13J86 HEAT SINK 6A-17045FD2 SCREW 13E8J HEAT DISSIPATION SHEET 13J82 IF COVER UNIT 12H45 SCREW 13S9K TOP COVER UNIT 13J5H SCREW 6A-17045FA SCREW 13J7Y BOTTOM COVER UNIT 13J7Z BOTTOM COVER PLATE UNIT...
  • Page 24 Item code Parts name Q'ty 13E8S POWER CONNECTER CAP 13Y47 SPONGE 13J7T HEAT SINK 13J7X IF GRIP UNIT 6A-17050FD2 SCREW 13E8R BATTERY LOCK LEVER SPRING 1K010-830 SCREW 139RS BATTERY CONTACT PCB UINT 13G2D HARNESS T2-02300SX1 STEEL BALL 13J6U EVF PANEL UNIT 127MZ SPRING 129PT...
  • Page 25 Item code Parts name Q'ty 13D87 DELETE BUTTON 114SA LOCK KNOB 13S3Y SPRING 11A2T SPRING 13J7L REAR FPC UNIT 6A-17035FD2 SCREW 13D7Z TRIPOD FIXING PLATE 13D86 MOLD 13G27 HINGE FIXING PLATE 13F58 SHEET 13J7F BACK MONITOR UNIT 13J7J HINGE COVER 12H46 SCREW 13S78...

  • Page 26: Parts Removal And Replacement Procedures

    Parts Removal and Replace- ment Procedures Before disassembling the Product ● As for the Product powered on by the power switch, before disas- sembling the Product, be sure to check that the Product is pow- ered off and that the battery has been removed. ●...

  • Page 27: Reference Pages For Replacement Procedures By Major Parts

    Reference Pages for Replacement Procedures by Major Parts BOTTOM COVER Disassembly P.19 - P.24 , P.26 - P.27 Assembly P.105 - P.107 , P.109 - P.112 REAR COVER UNIT Disassembly P.19 - P.24 , P.38 - P.51 Assembly P.65 - P.90 , P.109 - P.112 TOP COVER UNIT Disassembly P.19 - P.24 , P.26 - P.29 , P.52...

  • Page 28: Disassembly

    Disassembly 1. Exterior Section CABLE CLIP UNIT IF COVER (MIC SIDE) CABLE CLIP UNIT (13F09) LICENSE LABEL(US_30-) LICENSE LABEL(US_30-) (140T1) SHOE COVER...

  • Page 29: Eyepiece Unit

    EYEPIECE UNIT EYEPIECE UNIT (12U2M-A0V322) BATTERY CAP UNIT BATTERY CAP UNIT (129S9) BATTERY CAP UNIT NAME PLATE NAME PLATE (1334K)

  • Page 30: Neck-Strap Ring

    NECK-STRAP RING NECK-STRAP RING COVER (1K685-799) x 2 NECK-STRAP RING (1K100-035) x 2 DIOPTER ADJUSTMENT KNOB DIOPTER ADJUSTMENT KNOB COVER (12G7R) Cutter, etc. This is covered with DOUBLE STICK TAPE. Apply ethyl alcohol and use a Ethyl alcohol cutter or other fine-tipped tool to remove it.

  • Page 31: Rear Section

    REAR SECTION SCREW (1382U) x 2 SCREW (134BG) SCREW (134BG) x 2 SCREW (12S2T) SCREW (134BG) x 2 SCREW (134BG) SCREW (1382U) x 2 SCREW (12S2T) DIOPTER ADJUSTMENT KNOB (13H2W) SCREW (H1-17060FD2)
  • Page 32 SCREW (134BG) MEDIA COVER UNIT SCREW (12H45) x 2 SCREW (134BG) SCREW (12S2T) SCREW (13H19)

  • Page 33: Heat Sink

    Boss x 2 HEAT SINK SCREW (6A-17045FD2) Non-reusable SCREW SCREW (138R9) x 3 HEAT SINK (13J80) Boss x 2...
  • Page 34 HEAT DISSIPATION HEAT DISSIPATION SHEET (132C8) SHEET (132C9) HEAT DISSIPATION SHEET (13G2U) HEAT DISSIPATION HEAT DISSIPATION SHEET (13J4V) SHEET (13P0K) SHEET (132C9) GASKET (12A8Y)

  • Page 35: Evf Unit

    EVF UNIT Do not touch ‫ە‬ the red parts of EVF UNIT (13T20) the EVF UNIT (13T20). BOTTOM COVER SCREW SCREW (12S07) x 2 (12H47) x 3 SCREW SCREW (12S07) (12H47) x 3 SCREW (12U6M) x 2 SCREW (12U6M) x 2 SCREW (12S07)
  • Page 36 BOTTOM COVER PLATE UNIT (13J7Z) BOTTOM COVER UNIT BOTTOM COVER UNIT (13J7Y) POWER CONNECTER CAP (13E8S)

  • Page 37: Top Cover Section

    TOP COVER section SCREW (12H45) SCREW (6A-17045FD2) SCREW #206 (6A-17045FD2) IF COVER (MIC SIDE) SCREW (12H45)
  • Page 38 SCREW (6A-17045FA) SCREW (13J5H) x 2 SCREW (138R9) x 2 Non-reusable SCREW SCREW (13J5H) x 2 SCREW (138R9) x 2 SCREW (6A-17045FA) Non-reusable SCREW TOP COVER UNIT (13S9K)
  • Page 39 2. FRONT BODY IF COVER UNIT IF COVER UNIT (13J82) SCREW (12H45) WMA CABLE (13S7W) WMA ANTENNA PCB DOUBLE STICK TAPE (127RF) (126ZG) Boss x 5 Hook...
  • Page 40 IF COVER (USB SIDE) (13D72) IF COVER (MIC SIDE) (13D73) MAIN PCB UNIT MAIN PCB UNIT...
  • Page 41 SCREW (1A-17035FA) MAIN PCB UNIT SCREW (6A-17045FD2) Boss x 2 Non-reusable SCREW HEAT DISSIPATION SCREW (138R9) SHEET (13E8J) Non-reusable part SCREW (6A-17045FD2) HEAT SINK (13J86) Boss x 2...
  • Page 42 SPONGE HEAT DISSIPATION (13W4W) x 2 SHEET (138NU) HEAT DISSIPATION SHEET (1428S) HEAT DISSIPATION SHEET (13E8H) HEAT DISSIPATION SHEET (13J9F) HEAT DISSIPATION SHEET (1384Y) SPONGE (1380Y) x 3...
  • Page 43 SCREW (1A-20050FD2) x 2 TRIPOD BASE UNIT (13J83) Boss x 2 FIXING PLATE (13J87) Boss x 2 SPONGE (13D4Y) SCREW Non-reusable SCREW (138R9) x 2 SPONGE (13Y38) SPONGE (13S77)
  • Page 44 SCREW (6A-17050FD2) SCREW (6A-17040FA) BATTERY CONTACT PCB UNIT (139RS) HARNESS (13G2D) Boss x 2 Do not touch the red parts of the ‫ە‬ BATTERY CONTACT PCB UNIT SCREW (1K010-830) BATTERY LOCK BATTERY LOCK LEVER LEVER (13E8P) SPRING SPRING hook...
  • Page 45 BATTERY LOCK LEVER SPRING (13E8R) BATTERY LOCK LEVER SPRING SPRING hook IF GRIP UNIT (13J7X)
  • Page 46 SPONGE (13Y47) SCREW (6A-17040FD2) x 2 HEAT SINK (13J7T) Boss x 2...
  • Page 47 3. REAR COVER Section REAR COVER UNIT HEAT DISSIPATION SHEET (13P0H) SHEET (12A9R) HEAT DISSIPATION SPONGE SHEET (13P0J) (13H2X) SPONGE (13J95) SCREW (6A-17045FA) x 2 SCREW SCREW (13S78) (6A-17045FA) x 2 SCREW (13S78)
  • Page 48 SCREW (12H46) HINGE COVER (13J7J)
  • Page 49 SCREW (1A-17035FD2) x 3 BACK MONITOR UNIT Boss x 2 (13J7F) HINGE FIXING PLATE (13G27) SHEET (13F58) REAR COVER UNIT (142SG)
  • Page 50 BACK DISPLAY COVER UNIT BACK DISPLAY COVER UNIT (13J7C) Hook x 7 SCREW (12R78) x 2 HINGE UNIT Solder points x 4 Black Blue Yellow...

  • Page 51: Rear Fpc Unit

    Boss x 2 HINGE UNIT (13J79) SCREW (134BK) x 2 REAR FPC UNIT SCREW (6A-17040FA) x 3 REAR FPC UNIT...
  • Page 52 SCREW (6A-17040FA) x 4 MOLD MOLD (13D86) SCREW (6A-17040FA) x 4 Boss x 5 SCREW (6A-17035FD2) TRIPOD FIXING PLATE (13D7Z) Boss x 2...
  • Page 53 SCREW (6A-17035FD2) x 6 SPONGE (11W3P) REAR OPERATION RETAINER PLATE UNIT MEDIA SHAFT GND PLATE REAR OPERATION RETAINER PLATE Boss x 9 REAR FPC UNIT (13J7L) Do not touch the red parts of the REAR ‫ە‬ FPC UNIT. Boss x 21...
  • Page 54 SPRING (11A2T) STEEL BALL STEEL BALL (T2-02300SX1) SPRING SPRING (13S3Y) LOCK KNOB (114SA)
  • Page 55 DELETE BUTTON (13D87) FOURTH BUTTON (13D89) Boss x 2 RUBBER (1276J) Boss x 2...
  • Page 56 OK BUTTON (1276G) MULTI SELECTOR I BUTTON (1278E) (1276H) SPONGE (1317S) ACCESS LAMP WINDOW (1278Z) Boss x 2 RUBBER (12Z13) AF-ON BUTTON (12Z83) REAR HEAT SINK UNIT Boss x 8...
  • Page 57 MOLD (12Z11) RUBBER (122FN) DISP BUTTON (1277B) SCREW (6A-14025FA) x 2 MOLD (13F5B) Boss x 2 DISP SELECTOR (1276Z)
  • Page 58 SHEET (134N6) REAR RUBBER UNIT (13J7G) DOUBLE STICK TAPE SCREW (6A-17030FA) CLICK SPRING (1322P) MEDIA COVER UNIT Boss x 2...
  • Page 59 MEDIA COVER HINGE SHAFT (13E5Z) SPRING MEDIA COVER UNIT SPRING (13E6A) SPRING SPRING hook x 3 MEDIA COVER UNIT MEDIA COVER UNIT (13J7H)
  • Page 60 SPONGE (13D7L) SPONGE (13F0F) SHEET (12R6D) RUBBER (134A8) x 2 SPONGE (13F0G) SPONGE (13F49)
  • Page 61 4. TOP COVER Section TOP OLED WINDOW (13D5F) SHEET This is covered with DOUBLE STICK TAPE. Apply ethyl alcohol and use a cutter or other fine-tipped tool to remove it. Be careful not to scratch it with the cutter. Cutter, etc. Ethyl alcohol SHEET (13D5G)

  • Page 62: Eyepiece Barrel Unit

    5. EVF EYEPIECE BARREL UNIT SHEET (12R6D) x 2 SHEET (1355K) TAPE (12H6M) DOUBLE STICK TAPE...
  • Page 63 EVF DUSTPROOF SHEET (12G6G) EYE SENSOR FPC UNIT Boss x 2 EYE SENSOR FPC UNIT Hook SPRING (127N2) CLICK BALL (T1-01500SX1)
  • Page 64 SCREW (6A-17040FD2) x 2 DIOPTER ADJUSTMENT CAM CASE DIOPTER ADJUSTMENT (127N1) CAM (127N0) Boss x 2 EVF BOTTOM COVER (12P05) Hook x 4...
  • Page 65 SCREW (6A-17040FD2) x 2 EYEPIECE BARREL UNIT (129PT) SPRING (127MZ) EVF PANEL UNIT (13J6U) EYE SENSOR FPC UNIT EYEPIECE BLOCK UNIT (129PR) Boss x 2 DOUBLE STICK TAPE...

  • Page 66: Assembly

    Assembly 1. EVF EYEPIECE BARREL UNIT Mountain fold Valley fold EYE SENSOR FPC UNIT EYE SENSOR FPC UNIT EYE SENSOR FPC UNIT EYEPIECE BLOCK UNIT (129PR) Boss x 2 DOUBLE STICK TAPE...
  • Page 67 EYEPIECE BARREL UNIT (129PT) SPRING (127MZ) EVF PANEL UNIT (13J6U) SCREW (6A-17040FD2) x 2 0.15 N•m...
  • Page 68 EVF BOTTOM COVER (12P05) Hook x 4 Do not apply to the red area. ‫ە‬ Back view DIOPTER ADJUSTMENT CAM (127N0) CFD409Z DIOPTER ADJUSTMENT CAM Reference position for mounting...
  • Page 69 SCREW (6A-17040FD2) x 2 0.15 N•m DIOPTER ADJUSTMENT CAM CASE (127N1) Boss x 2 SPRING (127N2) CLICK BALL (T1-01500SX1) CFD409Z...
  • Page 70 EYE SENSOR FPC UNIT EYE SENSOR FPC UNIT Boss x 2 Hook Attaching reference position EVF DUSTPROOF SHEET (12G6G) No lifting ‫ە‬...
  • Page 71 Scribed lines DOUBLE STICK TAPE DOUBLE STICK TAPE Attaching reference position TAPE (12H6M) Attaching reference position TAPE (12H6M)
  • Page 72 SHEET (12R6D) x 2 SHEET (1355K) Attaching reference position SHEET (1355K)

  • Page 73: Top Cover

    2. TOP COVER Section TOP COVER Attaching reference SHEET (13D5G) position SHEET (13D5G) TOP OLED WINDOW (13D5F) SHEET TOP OLED WINDOW Attaching reference position...

  • Page 74: Rear Cover Unit

    3. REAR COVER Section REAR COVER UNIT RUBBER (134A8) x 2 SPONGE OS-30P SPONGE SPONGE SPONGE (13F0G) Attaching reference position...
  • Page 75 OS-30P SPONGE SPONGE (13F0G) SPONGE SPONGE (13F49) (13F49) Attaching reference position SPONGE (13F0F) SPONGE (13F0F) SPONGE (13F49) SPONGE (13F0F) OS-30P SPONGE (13F49) Attaching reference position...
  • Page 76 OS-30P SPONGE SPONGE SPONGE (13D7L) (13D7L) SPONGE (13F0F) SPONGE (13F0F) Attaching reference position SHEET (12R6D) SHEET (12R6D)
  • Page 77 MEDIA COVER UNIT (13J7H) MEDIA COVER UNIT OS-30P (13J7H) Do not apply to the red area. ‫ە‬ MEDIA COVER UNIT Align the hole positions. (13J7H) MEDIA COVER UNIT DN-C3HN SPRING (13E6A) SPRING SPRING hook x 3 MEDIA COVER MEDIA COVER UNIT UNIT...
  • Page 78 SPRING MEDIA COVER HINGE SHAFT (13E5Z) DN-C3HN SPRING MEDIA COVER HINGE SHAFT MEDIA COVER HINGE SHAFT CLICK SPRING SCREW (6A-17030FA) (1322P) 0.12 N•m CLICK SPRING DN-C3HN Do not apply to the ‫ە‬ red area. Boss x 2...
  • Page 79 REAR RUBBER UNIT REAR RUBBER UNIT (13J7G) Convex part DOUBLE STICK TAPE SHEET (134N6) SHEET...
  • Page 80 Do not apply to the red area. ‫ە‬ FG-30 HF-1076 SCREW (6A-14025FA) x 2 0.07 N•m DISP SELECTOR MOLD (13F5B) Align with the position shown in the figure. DISP SELECTOR (1276Z) Boss x 2...
  • Page 81 DISP BUTTON (1277B) DN-C3HN Do not apply to the red area. ‫ە‬ RUBBER DISP BUTTON (1277B) DN-C3HN RUBBER Align the shapes. (122FN) DISP SELECTOR Align with the position shown in the figure. DISP BUTTON DISP SELECTOR...

  • Page 82: Rear Fpc Unit

    Boss MOLD (12Z11) MOLD DISP BUTTON Align the shapes. REAR FPC UNIT REAR HEAT SINK UNIT DOUBLE STICK TAPE Boss x 8...
  • Page 83 AF-ON BUTTON RUBBER (12Z13) (12Z83) AF-ON BUTTON ACCESS I BUTTON (1278E) LAMP WINDOW (1278Z) Boss Boss x 2...
  • Page 84 Convex OK BUTTON (1276G) part MULTI SELECTOR MULTI SELECTOR (1276H) SPONGE (1317S) OK BUTTON RUBBER RUBBER (1276J) Boss x 2 MULTI SELECTOR...
  • Page 85 FOURTH BUTTON (13D89) FOURTH BUTTON Boss x 2 DELETE BUTTON (13D87) Convex part DELETE BUTTON SPRING (13S3Y) SPRING MDF-1176BE LOCK KNOB (114SA)
  • Page 86 DN-C3HN STEEL BALL (T2-02300SX1) SPRING (11A2T) STEEL BALL FG-30 STEEL BALL SPRING STEEL BALL SPRING STEEL BALL...
  • Page 87 REAR FPC UNIT (13J7L) Do not touch the red parts of ‫ە‬ the REAR FPC UNIT. Mountain fold...
  • Page 88 Do not touch the red parts of the REAR FPC UNIT. ‫ە‬ Cutout REAR FPC UNIT (13J7L) STEEL BALL SPRING Boss x 19 REAR FPC UNIT Mountain fold Valley fold...
  • Page 89 Attaching reference position SPONGE SPONGE (11W3P) REAR OPERATION RETAINER PLATE REAR OPERATION RETAINER PLATE MEDIA SHAFT GND PLATE Boss x 2 MEDIA SHAFT GND PLATE...
  • Page 90 SCREW (6A-17035FD2) x 6 0.15 N•m Boss x 5 REAR OPERATION RETAINER PLATE UNIT MEDIA SHAFT GND PLATE REAR OPERATION RETAINER PLATE UNIT SCREW (6A-17035FD2) 0.15 N•m TRIPOD FIXING PLATE (13D7Z) Boss x 2...
  • Page 91 MOLD SCREW (6A-17040FA) x 4 (13D86) SCREW (6A-17040FA) x 4 0.15 N•m MOLD Boss x 5 SCREW (6A-17040FA) x 3 0.15 N•m REAR FPC UNIT...

  • Page 92: Hinge Unit

    HINGE UNIT HINGE UNIT (13J79) HINGE UNIT Cutout Boss x 2 HINGE UNIT SCREW (134BK) x 2 0.15 N•m...

  • Page 93: Back Display Cover Unit

    Solder points x 4 HINGE UNIT Black Blue Yellow Align each cord with the position shown in the figure BACK DISPLAY COVER UNIT BACK DISPLAY COVER UNIT (13J7C) Hook x 7...
  • Page 94 BACK DISPLAY COVER UNIT BACK DISPLAY COVER UNIT HINGE UNIT HINGE UNIT SCREW (12R78) x 2 0.12 N•m SHEET (13F58) REAR COVER UNIT (142SG) SHEET Attaching reference position...
  • Page 95 HINGE FIXING PLATE (13G27) Boss x 2 SCREW (1A-17035FD2) x 3 0.20 N•m BACK MONITOR UNIT (13J7F) Boss x 2 Align the cable as shown in the image.
  • Page 96 SCREW (12H46) 0.20 N•m HINGE COVER HINGE COVER (13J7J) Boss x 2...
  • Page 97 SCREW (13S78) SCREW SCREW (6A-17045FA) x 2 (13S78) 0.12 N•m 0.20 N•m SCREW (6A-17045FA) x 2 HINGE FIXING PLATE...

  • Page 98: Rear Cover Unit

    REAR COVER UNIT SPONGE SPONGE (13H2X) SPONGE (13H2X) SPONGE (13J95) SPONGE (13J95) Attaching reference position HEAT DISSIPATION SHEET (13P0J) HEAT DISSIPATION SHEET SPONGE Attaching reference position...
  • Page 99 SHEET Attaching reference (12A9R) position SHEET HEAT DISSIPATION SHEET HEAT DISSIPATION SHEET (13P0H) (13P0H) SHEET Attaching reference position...
  • Page 100 SPONGE (13Y47) SPONGE Attaching reference position SCREW (6A-17040FD2) x 2 0.12 N•m HEAT SINK (13J7T) HEAT SINK Boss x 2...

  • Page 101: Battery Box Unit

    DOUBLE STICK TAPE Attaching reference position IF GRIP UNIT IF GRIP UNIT (13J7X) BATTERY BOX UNIT BATTERY LOCK LEVER SPRING (13E8R) BATTERY LOCK LEVER SPRING DN-C3HN BATTERY LOCK LEVER SPRING SPRING hook...
  • Page 102 BATTERY LOCK BATTERY LOCK LEVER LEVER (13E8P) SCREW (1K010-830) 0.15 N•m SPRING SPRING hook SCREW SCREW (6A-17050FD2) (6A-17040FA) 0.15 N•m 0.15 N•m BATTERY Tightening torque CONTACT PCB 0.15 N•m UNIT (139RS) HARNESS (13G2D) Boss x 2 Do not touch the red parts of the ‫ە‬...
  • Page 103 SPONGE (13Y38) FIXING PLATE (13J87) SPONGE (13S77) Boss x 2 SCREW (138R9) x 2 SPONGE (13D4Y) Non-reusable part SCREW (1A-20050FD2) x 2 0.25 N•m TRIPOD BASE UNIT (13J83) Boss x 2...

  • Page 104: Heat Sink

    HEAT SINK SPONGE (1380Y) Free from dust, fluff, dirt, etc. ‫ە‬ HEAT DISSIPATION SHEET (1384Y) HEAT DISSIPATION SHEET Attaching reference position HEAT DISSIPATION SHEET (1428S) HEAT DISSIPATION HEAT DISSIPATION SHEET (13E8H) HEAT DISSIPATION SHEET (13J9F) HEAT DISSIPATION SHEET (13J9F) SHEET (13E8H) HEAT DISSIPATION SHEET (1428S) Attaching reference position...
  • Page 105 HEAT DISSIPATION SHEET (138NU) SPONGE (13W4W) x 2 Attaching reference HEAT DISSIPATION position SHEET (13J9F) Attaching reference position HEAT DISSIPATION SHEET (138NU) SPONGE x 2 Non-reusable SCREW SCREW (138R9) 0.15 N•m HEAT SINK (13J86) SCREW (6A-17045FD2) 0.15 N•m Boss x 2...

  • Page 106: Main Pcb Unit

    HEAT DISSIPATION SHEET Non-reusable part (13E8J) HEAT DISSIPATION SHEET Attaching reference position MAIN PCB UNIT SCREW (1A-17035FA) x 2 MAIN PCB UNIT 0.15 N•m SCREW (A-17045FD2) Boss x 2...

  • Page 107: If Cover Unit

    MAIN PCB UNIT IF COVER UNIT OS-30P Do not apply to the red area. ‫ە‬ IF COVER (MIC IF COVER (USB SIDE) SIDE) (13D73) (13D72) IF COVER (MIC IF COVER (USB SIDE) SIDE) (13D73) (13D72)
  • Page 108 Cut off if the parts are replaced IF COVER (USB SIDE) (13D72) IF COVER (MIC SIDE) (13D73) DOUBLE STICK TAPE (126ZG) Attaching reference position DOUBLE STICK TAPE...
  • Page 109 WMA CABLE (13S7W) WMA ANTENNA PCB (127RF) Align with the position shown in the figure. Attaching reference position DOUBLE STICK TAPE DOUBLE STICK TAPE Guide x 5 Hook...
  • Page 110 IF COVER UNIT Boss x 2 IF COVER UNIT (13J82) SCREW (12H45) x 2 0.15 N•m...

  • Page 111: Top Cover Section

    TOP COVER SECTION Attaching reference position Attaching reference position Attaching reference position Attaching reference position TOP COVER UNIT (13S9K) TOP COVER UNIT Reference position for mounting...
  • Page 112 SCREW (6A-17045FA) TOP COVER UNIT 0.15 N•m SCREW (13J5H) x 2 SCREW (138R9) x 2 0.20 N•m Non-reusable SCREW SCREW (13J5H) x 2 SCREW (6A-17045FA) 0.20 N•m 0.15 N•m SCREW (138R9) x 2 0.15 N•m Non-reusable SCREW IF COVER (MIC SIDE) SCREW (12H45) 0.15 N•m...
  • Page 113 SCREW (12H45) 0.15 N•m SCREW (6A-17045FD2) 0.15 N•m SCREW (6A-17045FD2) Do not apply to the red area. OS-30P ‫ە‬...

  • Page 114: Bottom Cover

    BOTTOM COVER POWER CONNECTER POWER CONNECTER CAP (13E8S) BOTTOM COVER UNIT (13J7Y) Convex part Reference position for ‫ە‬ mounting BOTTOM COVER PLATE UNIT (13J7Z) BOTTOM COVER UNIT...
  • Page 115 SCREW (12H47) x 3 0.15 N•m SCREW (12S07) 0.15 N•m SCREW (12U6M) x 2 0.25 N•m SCREW (12S07) 0.15 N•m SCREW (12S07) x 2 SCREW (12H47) x 3 SCREW (12U6M) x 2...

  • Page 116: Evf Unit

    EVF UNIT EVF UNIT EVF UNIT (13T20) Do not touch ‫ە‬ the red parts of the EVF UNIT. Boss x 2 GASKET (12A8Y) Attaching reference position GASKET...

  • Page 117: Heat Sink

    HEAT SINK HEAT DISSIPATION HEAT DISSIPATION SHEET (13J4V) SHEET (13P0K) SHEET (132C9) HEAT DISSIPATION SHEET (132C9) HEAT DISSIPATION SHEET (13P0K) SHEET Attaching reference position Attaching reference position HEAT DISSIPATION HEAT DISSIPATION SHEET (132C8) SHEET (132C9) HEAT DISSIPATION SHEET (13G2U) HEAT DISSIPATION SHEET (132C9) HEAT DISSIPATION SHEET (13G2U) HEAT...

  • Page 118: Rear Section

    SCREW (6A-17045FD2) 0.15 N•m SCREW (138R9) x 2 SCREW (138R9) 0.15 N•m 0.15 N•m Non-reusable Non-reusable SCREW SCREW HEAT SINK (13J80) Boss x 2 REAR SECTION Boss x 2...
  • Page 119 SCREW (134BG) x 2 0.15 N•m SCREW (12S2T) x 2 0.15 N•m SCREW (13H19) SCREW (12H45) x 2 0.15 N•m...
  • Page 120 SCREW (134BG) MEDIA COVER UNIT 0.15 N•m Align the shapes. DIOPTER ADJUSTMENT KNOB (13H2W) DIOPTER ADJUSTMENT KNOB SCREW (H1- 17060FD2) 0.15 N•m...
  • Page 121 SCREW (134BG) SCREW (1382U) x 2 0.15 N•m 0.25 N•m SCREW (134BG) x 2 0.15 N•m SCREW (12S2T) 0.15 N•m SCREW SCREW (134BG) (134BG) SCREW (1382U) SCREW (12S2T)

  • Page 122: Neck-Strap Ring

    6. Exterior Section DIOPTER ADJUSTMENT KNOB DIOPTER ADJUSTMENT KNOB COVER (12G7R) DIOPTER ADJUSTMENT KNOB COVER Align the shapes. NECK-STRAP RING NECK-STRAP RING COVER Place the cut part of the NECK-STRAP ‫ە‬ (1K685-799) x 2 RING inside the NECK-STRAP RING COVER. Cut part Cut part NECK-...

  • Page 123: Name Plate

    NAME PLATE Attaching reference position NAME PLATE NAME PLATE (1334K) BATTERY CAP UNIT Do not apply to the red area. ‫ە‬ BATTERY CAP UNIT OS-30P BATTERY CAP UNIT (129S9) BATTERY CAP UNIT...

  • Page 124: Eyepiece Unit

    EYEPIECE UNIT EYEPIECE UNIT (12U2M-A0V322) LICENSE LABEL(US_30-) LICENSE LICENSE LABEL(US_30-) LABEL Attaching reference position...

  • Page 125: Shoe Cover

    SHOE COVER SHOE COVER LEN317A Do not apply to the red area. ‫ە‬...

  • Page 126: Cable Clip Unit

    CABLE CLIP UNIT CABLE CLIP UNIT CABLE CLIP UNIT IF COVER (MIC SIDE) (13F09)

  • Page 127: Switch Inspection Process

    Switch Inspection Process Tools and parts required: ● Your mirrorless camera Switch inspection Follow the steps below to perform a switch inspection. Inspection procedure Check the switch Operate the all switches of camera and check whether the assigned function is working. ●...

  • Page 128: Af Accuracy Inspection Process

    – Focus charts can be purchased at stores that sell camera-related products or online stores that sell camera-related products. – Nikon hereby disclaims all responsibility and liability for any focus charts or other items purchased from third party retailers. Camera settings ●...
  • Page 129 ● Diffraction correction: ON ● Automatic distortion correction: ON ● Vignette control: Standard ● Body VR: OFF ● Exposure delay mode: one to two seconds ● AF fine adjustment: OFF Shooting environment Install the camera/lens and chart, referring to the figure below. Shoot in a location that meets the following requirements: ●...

  • Page 130: Af Accuracy Inspection

    AF accuracy inspection Follow the steps below to inspect the AF accuracy. Inspection procedure Adjust the camera position 1. Adjust the shooting distance so that the entire focus chart is displayed on the screen as shown in the image below. •...
  • Page 131 Shoot the chart 1. Press the release button to shoot the target chart. 2. When checking before disassembling, check the inside of the red frame in the image, and record the focus position. 3. When checking after disassembling, confirm that there is no difference from the focus position recorded before disassembling.

  • Page 132: Vr Function Inspection Process

    – A Chart can be purchased at stores that sell camera-related products or online stores that sell camera-related products. – Nikon hereby disclaims all responsibility and liability for any focus charts or other items purchased from third party retailers. VR function inspection Follow the steps below to perform a VR function inspection.
  • Page 133 Camera settings Image quality FINE Focus mode AF-S Picture Control OFF / ON Image correction function (vignetting, diffraction, distortion) Metering method Center-weighted metering Exposure mode Shutter-priority auto (S) White balance Auto0 (Keep white) Aperture F4(Full open), The reciprocal of the focal length of a lens Shutter Speed (For example, if use a 50mm lens, set it to 1/50.)
  • Page 134 No reproduction in any form of this document, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION. Out of concern for the environment, Nikon is working to reduce its use of paper. © 2024 Nikon Corporation...

Table of Contents