13. TECHNICAL INFORMATION..................21 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference.
Put knives and cutlery with sharp points in the cutlery • basket with the points down or in a horizontal position. Do not keep the appliance door open without • supervision to prevent to fall on it. Before maintenance, deactivate the appliance and •...
Page 5
ENGLISH • The appliance can release hot steam if you open the door while a programme operates. • Do not put flammable products or items that are wet with flammable products in, near or on the appliance. 2.5 Service • Contact the Authorised Service Centre to repair the appliance.
3. PRODUCT DESCRIPTION Upper spray arm Rinse aid dispenser Lower spray arm Detergent dispenser Filters Cutlery basket Rating plate Lower basket Salt container Upper basket Air vent 3.1 Beam-on-Floor • When the appliance has a malfunction, the red light flashes.
ENGLISH 4. CONTROL PANEL On/off button Multitab button Display TimeSaver button Delay button Reset button Program button Indicators ExtraHygiene button 4.1 Indicators Indicator Description Salt indicator. It is always off while the programme operates. Rinse aid indicator. It is always off while the programme operates. 5.
Page 8
Programme Degree of soil Programme phases Options Type of load • Normal or light • Wash 45 °C • Multitab GLASS soil • Rinses • Delicate crock- • Dry ery and glass- ware • Fresh soil • Wash 60 °C •...
ENGLISH Water Energy Duration Programme (kWh) (min) 11 - 12 0.7 - 0.8 70 - 80 GLASS 30MIN PREWASH 10 - 11 0.9 - 1.0 200 - 220 EXTRA SILENT 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values.
ENGLISH signal is deactivated but it is possible to the indicators start to activate it. flash and the display is blank. 2. Press How to activate the acoustic • The indicators go off. signal for the end of programme • The indicator continues to flash.
The washing results are the same as with If the option is not applicable to the the normal programme duration. The programme, the related indicator does drying results can decrease. not come on or it flashes quickly for a few seconds and then goes off.
ENGLISH 8.2 How to fill the rinse aid CAUTION! dispenser Only use rinse aid specifically designed for dishwashers. 1. Press the release button (D) to open the lid (C). 2. Pour the rinse aid in the dispenser (A) until the liquid reaches the fill level 'max'.
Page 14
Starting a programme with delay start 1. Set a programme. 2. Press again and again until the display shows the delay time you want to set (from 1 to 24 hours). The delay indicator comes on. 3. Close the appliance door to start the countdown.
ENGLISH End of the programme automatically deactivate the appliance. When the programme is completed the 2. Close the water tap. display shows 0:00 . 1. Press the on/off button or wait for the Auto Off function to 10. HINTS AND TIPS 10.1 General without additional functions), rinse aid and salt separately for optimal...
• Do not put in the appliance items that • The filters are clean and correctly can absorb water (sponges, installed. household cloths). • The cap of the salt container is tight. • Remove remaining food from the • The spray arms are not clogged.
Page 17
ENGLISH 7. Reassemble the filters (B) and (C). 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A). 4.
• If you regularly use short duration • To maintain the performance of your programmes, these can leave appliance at its best, we recommend deposits of grease and limescale to use monthly a specific cleaning inside the appliance. To prevent this, product for dishwashers.
Page 19
ENGLISH Problem and alarm code Possible cause and solution The appliance stops and • It is normal. It provides optimal cleaning results and en- starts more times during op- ergy savings. eration. The program lasts too long. • Select the TimeSaver option to shorten the program time.
Page 20
12.1 The washing and drying results are not satisfactory Problem Possible cause and solution Poor washing results. • Refer to "Daily use", "Hints and tips" and basket loading leaflet. • Use more intensive washing programmes. • If you use multi-tablets, always switch on the option Multitab.
ENGLISH Problem Possible cause and solution There are residues of deter- • The detergent tablet got stuck in the dispenser and gent in the dispenser at the therefore was not completely washed away by water. end of the programme. • Water cannot wash away the detergent from the dis- penser.
Need help?
Do you have a question about the FAVORIT 78400VI0P and is the answer not in the manual?
Questions and answers