N8146-87 Front Bezel User's Guide Preface Thank you very much for your purchase of this product. The guide is intended to allow you to install and use the product correctly and safely. Read the guide carefully before handling the product.
Safety Precautions Observe the following notes to use the product safely. WARNING If smoke, odor, or noise is present, immediately turn off the server and disconnect the power plug from the outlet, then contact the store where you purchased the product or your maintenance service company.
Page 9
1.Components Check components according to the list below. Item Description Name Q'ty Front bezel (white) Catch Screw Security Lock Key User's Guide This document ① ② ③ ④ ⑤...
Page 10
2.Installing the Bezel to the Server Take the steps below to install the bezel to the server. ●Read the sections "Safety Precautions" and "Handling precautions" in the User's Guide of the server in which you are going to install the bezel to install or remove the bezel safely and properly.
Page 11
③ Hook Remarks (1) No part of this manual may be reproduced in any form without the prior written permission of NEC Corporation. (2) The contents of this User's Guide may be revised without prior notice. (3) The contents of this User's Guide shall not be copied or altered without the prior written permission of NEC Corporation.
Need help?
Do you have a question about the N8146-87 and is the answer not in the manual?
Questions and answers