Channel Selection; Category Search; Direct Access Of Channels - Denon AVR-3806S Operating Instructions Manual

Basic Operation

Channel selection

1
Set the input source to "TUNER".
2
TUNER
Press the button on the remote control
TUNER mode.
unit to select the
3
3 Set the input source to "TUNER".
Watching the display, press the
select the XM mode.
Channel number
Channel name
Artist name/Song title
4
TUNING • ª
Press the or
desired channel.
The channel changes continuously when you press and hold
the TUNING button.
When the artist name and song title are received, they are
displayed.

Category search

1 Press the F F G G button in the XM mode.
or
• The current category name is displayed.
2
CURSOR
F F or G G button to select the
Press the
CURSOR
category, and press the
to select the channel within the selected category.

Direct access of channels

1
Press the
2
Press the
channel.
For example, if you want to access channel 123 (ex.XM123)
BAND
button to
press the Number buttons as shown below.
button to reach the
(Remote control unit)
3
Once all number have been input, press the
ENTER
If the next NUMBER button is not pressed within several
seconds, the channel automatically switches to the channel
number that was input.
Channel Category
D D or H H button
SEARCH
XM mode.
button in the
NUMBER
buttons to enter the desired
button to change the channel.
46
• "LOADING" is displayed while receiving the channel or
information.
• "UPDATING" is displayed while updating encryption code.
• When the selected channel is not available, "XM– – –" is
displayed.
• Information on the artist name, song title, category and signal
level can be checked using the STATUS button on the main
unit.
• The XM Satellite Radio channels can be preset in the same
way as AM/FM band.
Please refer to "Preset memory" and "Recalling preset
stations" ( page 44).
Basic Operation