Advertisement
TABLE OF CONTENTS
BTC-CART & BTC-CART-WINCH
Receiving Instructions
After delivery, remove the packaging from the product. Inspect the product closely to determine
whether it sustained damage during transport. If damage is discovered, record a complete description of it
on the bill of lading. If the product is undamaged, discard the packaging.
NOTE: The end-user is solely responsible for confirming that product design, use, and maintenance comply
with laws, regulations, codes, and mandatory standards applied where the product is used.
Technical Service & Replacement Parts
For answers to questions not addressed in these instructions and to order replacement parts, labels, and
accessories, call our Technical Service and Parts Department at (260) 665-7586. The department can also
be contacted online at https://www.vestil.com/page-parts-request.php.
Electronic copies of Instruction Manuals
Additional copies of this instruction manual may be downloaded from
manuals.php.
Signal
Words..............................................................................................................................
Safety
Instructions.......................................................................................................................
Specifications.............................................................................................................................
National
Standards.....................................................................................................................
Exploded Views & Bills of
Assembling the
Cart...................................................................................................................
Using the
Cart.............................................................................................................................
Record of Satisfactory
Inspections &
Maintenance......................................................................................................... 9,
Labeling
Diagram.......................................................................................................................
Limited
Warranty.........................................................................................................................
TABLE OF CONTENTS
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Table of Contents
Materials................................................................................................
Condition.................................................................................................
Copyright 2021 Vestil Manufacturing Corp
Rev. 6/8/2022
Vestil Manufacturing Corp.
Fax: (260) 665-1339
www.vestil.com
BTC-CART, MANUAL
info@vestil.com
https://www.vestil.com/page-
Page 1 of 11
Page
2
2
3,
4
5
5,
6
7,
8
8,
9
9
10
10
11
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Vestil BTC-CART
Summary of Contents for Vestil BTC-CART
- Page 1 For answers to questions not addressed in these instructions and to order replacement parts, labels, and accessories, call our Technical Service and Parts Department at (260) 665-7586. The department can also be contacted online at https://www.vestil.com/page-parts-request.php. Electronic copies of Instruction Manuals Additional copies of this instruction manual may be downloaded from https://www.vestil.com/page-...
-
Page 2: Signal Words
SAFETY INSTRUCTIONS Vestil strives to identify foreseeable hazards associated with the use of its products. However, no manual can address every conceivable risk. Minimize the likelihood of injury by observing the hazards identified below and by inspecting and maintaining the product as instructed in INSPECTIONS &... -
Page 3: Specifications
SPECIFICATIONS Documents that provide specifications for BTC-CART and BTC-WINCH-CART products are available online to anyone who visits Vestil’s website. Specifications include dimensions, net weight, and capacity information. To access the appropriate specifications document, navigate to this webpage: https://www.vestil.com/product.php?FID=284. Click the “Specifications” tab. Scroll the page to the entry for the product you purchased, and click the button in the “PDF”... - Page 4 TABLE OF CONTENTS Rev. 6/8/2022 BTC-CART, MANUAL SPECIFICATIONS (continued from p.3) TABLE OF CONTENTS Copyright 2021 Vestil Manufacturing Corp Page 4 of 11...
-
Page 5: National Standards
Before putting this device into service, you must acquire a copy of the Standard. Apply all relevant parts of Part II: For the User. If instructions provided in this manual conflict with the Standard, then you should apply the instructions in the Standard. Vestil requests TECHNICAL SERVICE personnel. - Page 6 BOLT, GRADE A, Ø1/4-20 UNC x 1 LG, 36106 11005 HHCS #2 Z-PLATED NUT, HEX NUT Z-PLATED, Ø 1/4 - 20, 16-132-260 CASTER, RIGID, 4X2 36302 #5, GRADE 5 TABLE OF CONTENTS Copyright 2021 Vestil Manufacturing Corp Page 6 of 11...
-
Page 7: Assembling The Cart
Secure each bolt with a 3/8” flat washer, 3/8” lock washer, and 3/8”-16 hex nut. Overhead view Winch Flat washer Hex bolt Hex nut Lock washer Hex bolt TABLE OF CONTENTS Copyright 2021 Vestil Manufacturing Corp Page 7 of 11... -
Page 8: Using The Cart
Refer to the applicable EXPLODED VIEW (p. 5 6) to identify features. To see a video of this product in use, visit https://www.vestil.com/product.php?FID=284, scroll the page to the Videos selection bar, click the bar, and then click on video. WARNING USING THIS CART AS A FRONT END ATTACHMENT AFFECTS THE CENTER OF GRAVITY OF YOUR LIFT TRUCK. -
Page 9: Inspections & Maintenance
4. Casters: Examine each caster for significant wear, wobbling, deformations, warps, cracks, and other forms of damage. Confirm that caster brakes work properly. Apply the brakes and confirm that the cart cannot move without significant effort. TABLE OF CONTENTS Copyright 2021 Vestil Manufacturing Corp Page 9 of 11... -
Page 10: Labeling Diagram
(260) 665-7586 and asking for the Parts Department. A: Label 658 B: Label 218 C: Label 1153 D: Label 782 E: Label 212 TABLE OF CONTENTS Copyright 2021 Vestil Manufacturing Corp Page 10 of 11... - Page 11 Before providing warranty service, Vestil will require you to send the entire product, or just the defective part (or parts), to its facility in Angola, IN. What is covered under the warranty? The warranty covers defects in the following original, dynamic parts: motors, hydraulic pumps, motor controllers, and cylinders.
Need help?
Do you have a question about the BTC-CART and is the answer not in the manual?
Questions and answers