Harman Kardon SOUNDSTICKS3AM Setup Manual page 5

Step 5. Plug power cord into
power adapter.
Symptom
No sound from subwoofer, only
satellites.
No sound from satellites, only
subwoofer.
High frequencies sound dull.
This product is intended to be supplied by a listed direct plug-in power unit marked "Class 2" and output rated 16V DC minimum 1.5 A.
Step 6. Plug power adapter
into subwoofer.
Possible problem
Subwoofer volume control set at
minimum.
Satellites not connected to
subwoofer.
Satellites not positioned properly.
Step 7. Plug power cord into
wall receptacle.
Solution
Rotate subwoofer volume control clockwise until relative volume
level is appropriate.
Check connection of satellites to subwoofer.
Position and tilt (angle) loudspeakers toward listener. The sound from
the satellites is very directional due to the four-element linear array
design.
Easy Setup Guide
Step 8. Push power ON/OFF
button. Unit is on when LED
is lit. Push the subwoofer
volume knob/power ON/
OFF button. Unit is on
when the LED is lit. Use the
subwoofer volume knob
to balance the subwoofer's
volume with that of the
satellites.
www.harmankardon.com
Step 9. Adjust volume level
by touching + or – button.
Touching both the + and –
buttons mutes the audio.
When muted, touching
either button unmutes the
audio.
5