Subscribe to Our Youtube Channel
Related Manuals for Mx Onda MX-PI2230
Summary of Contents for Mx Onda MX-PI2230
- Page 1 USER AND INSTALLATION MANUAL INDUCTION HOB MX-PI2230 MODEL: PLEASE READ THESE INSTRUCTION MANUAL BEFORE USE...
-
Page 2: Safety Warnings
Safety Warnings Your safety is important to us. Please read this information before using your cooktop. Installation Electrical Shock Hazard • Disconnect the appliance from the mains electricity supply before carrying out any work or maintenance on it. • Connection to a good earth wiring system is essential and mandatory. - Page 3 installation. • This appliance is to be properly installed and earthed only by a suitably qualified person. • This appliance should be connected to a circuit which incorporates an isolating switch providing full disconnection from the power supply. • Failure to install the appliance correctly could invalidate any warranty or liability claims.
- Page 4 not be affected by the electromagnetic field. • Failure to follow this advice may result in death. Hot Surface Hazard • During use, accessible parts of this appliance will become hot enough to cause burns. • Do not let your body, clothing or any item other than suitable cookware contact the Induction glass until the surface is cool.
- Page 5 • Never leave any objects or utensils on the appliance. • Do not place or leave any magnetisable objects (e.g. credit cards, memory cards)or electronic devices (e.g. computers, MP3 players) near the appliance, as they may be affected by its electromagnetic field.
- Page 6 manual. All other servicing should be done by a qualified technician. • Do not use a steam cleaner to clean your cooktop. • Do not place or drop heavy objects on your cooktop. • Do not stand on your cooktop. •...
- Page 7 reduced physical,sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. •Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
- Page 8 be supervised continuously. WARNING:In order to prevent tipping of the appliance,this stabilizing means must be installed.Refer to the instructions for installation. WARNING:Use only hob guards designed by the manufactuer of the cooking appliance or indicated by the manufacture of the appliance in the instruction for use as suitable or hob guards incorporated in the appliance.The use of inappropriate guards can cause accidents.
-
Page 9: Product Overview
Product Overview Top View 1. 2000 W zone 2. 1500 W zone 3. 2300 W zone, boost to 3000W 4. Glass plate 5. Control panel... -
Page 10: Control Panel
Control Panel 1. Heating zone indicator 2. Timer control 3. Power / Timer regulating key 4. keylock control 5. ON/OFF control 6. Boost control A Word on Induction Cooking Induction cooking is a safe, advanced, efficient, and economical cooking technology. It works by electromagnetic vibrations generating heat directly in the pan, rather than indirectly through heating the glass surface. -
Page 11: Before Using Your New Induction Hob
Before using your New Induction Hob • Read this guide, taking special note of the „Safety Warnings‟ section. • Remove any protective film that may still be on your Induction hob. Using the Touch Controls • The controls respond to touch, so you don‟t need to apply any pressure. •... -
Page 12: Pan Dimensions
maximum efficiency.If you use smaller pot efficiency could be less than expected. Always centre your pan on the cooking zone. Always lift pans off the Induction hob – do not slide, or they may scratch the glass. Pan dimensions The cooking zones are up to a limit, automatically adapted to the diameter of the pan. -
Page 13: When You Have Finished Cooking
3. Select a heat setting by touching the “-“ or “+” control. • If you don‟t choose a heat setting within 1 minute, the Induction hob will automatically switch off. You will need to start again at step 1. • You can modify the heat setting at any time during cooking. -
Page 14: Locking The Controls
Using the Boost function for the right zone Boost is the function that one zone rising to a larger power in one second and lasting for 5 minutes. Thus you can get a more powerful and faster cooking. Using the Boost to get larger power 1. -
Page 15: Using The Timer
To lock the controls Touch the keylock control. The timer indicator will show “Lo“. To unlock the controls 1. Make sure the Induction hob is turned on. 2. Touch and hold the keylock control for a while 3. You can now start using your Induction hob. When the hob is in the lock mode, all the controls are disable except the ON/OFF you can always turn the induction hob off with the ON/OFF control in an emergency, but you shall unlock the hob first in the next operation... -
Page 16: Using The Timer As A Minute Minder
• You can set it to turn one cooking zone off after the set time is up. • You can set the timer up to 99 minutes. Using the Timer as a Minute Minder If you are not selecting any cooking zone 1. -
Page 17: Setting The Timer To Turn One Cooking Zone Off
Setting the timer to turn one cooking zone off Cooking zones set for this feature will: 1. Touch the “-“ or ”+” control of the heating zone that you want to set the timer for. (e.g. zone 2#) 2. Touch the “-“ or ”+” control of the timer, the minder indicator will start flashing and “30”... -
Page 18: Cooking Guidelines
Cooking Guidelines Take care when frying as the oil and fat heat up very quickly, particularly if you‟re using PowerBoost. At extremely high termperatures oil and fat will ignite spontaneously and this presents a serious fire risk. Cooking Tips • When food comes to the boil, reduce the temperature setting. •... -
Page 19: Heat Settings
2. Have all the ingredients and equipment ready. Stir-frying should be quick. If cooking large quantities, cook the food in several smaller batches. 3. Preheat the pan briefly and add two tablespoons of oil. 4. Cook any meat first, put it aside and keep warm. 5. -
Page 20: Care And Cleaning
Care and Cleaning What? How? Important! Everyday soiling on 1. Switch the power to the • When the power to the cooktop is glass (fingerprints, cooktop off. switched off, there will be no „hot marks, stains left by 2. Apply a cooktop cleaner surface‟... -
Page 21: Hints And Tips
Hints and Tips Problem Possible causes What to do The induction hob No power. Make sure the induction hob is cannot be turned on. connected to the power supply and that it is switched on. Check whether there is a power outage in your home or area. -
Page 22: Failure Display And Inspection
The induction hob or a Technical fault. Please note down the error cooking zone has letters and numbers, switch turned itself off the power to the induction hob unexpectedly, a tone off at the wall, and contact a sounds and an error qualified technician. -
Page 23: Selection Of Installation Equipment
Installation Selection of installation equipment Cut out the work surface according to the sizes shown in the drawing. For the purpose of installation and use, a minimum of 5 cm space shall be preserved around the hole. Be sure the thickness of the work surface is at least 30mm. Please select heat-resistant work surface material to avoid larger deformation caused by the heat radiation from the hotplate. -
Page 24: Before Locating The Fixing Brackets
A(mm) B(mm) C(mm) 50 mini 20 mini Air intake Air exit 5mm Before you install the hob, make sure that • the work surface is square and level, and no structural members interfere with space requirements • the work surface is made of a heat-resistant material •... -
Page 25: Adjusting The Bracket Position
Adjusting the bracket position Fix the hob on the work surface by screw 2 brackets on the bottom of hob(see picture) after installation. screw bracket Screw hole base Cautions 1. The induction hotplate must be installed by qualified personnel or technicians. We have professionals at your service. -
Page 26: Connecting The Hob To The Mains Power Supply
Connecting the hob to the mains power supply This hob must be connected to the mains power supply only by a suitably qualified person. Before connecting the hob to the mains power supply, check that: 1. the domestic wiring system is suitable for the power drawn by the hob. 2. - Page 27 This product complies with the European Directives 2004/108/EC (EMC – Electromagnetic Compatibility) and the 2006/95/EC (LVD – Low Voltage Directive) relative to Low Tension Security. “MX, MX ONDA” and its logos are trademarks of MX ONDA, S.A. Telephone of information and Technical Service: +34 902 551 501 MX ONDA, S.A.
Need help?
Do you have a question about the MX-PI2230 and is the answer not in the manual?
Questions and answers