LG LWHD1006R Owner's Manual page 15

Installation
The cabinet should be installed with a very slight tilt
(about 1/2") downward toward the outside
Adjust the bolt and the nut of Sill Support _'_for
balancing the cabinet.
Attach the cabinet to the window stool by driving
the screws t_ (Type B: Length 16ram (5/8 inch)
and below.) through the front angle into window
stool.
Pull each Frame Curtain (_) fully to each window
sash track, and repeat step 2.
Screw(Type B) Q
Sill Support (_
Sill Support (_)
iiiiiiiiiii! :' ifi_ iiiiiHiiiiiiiiiiiiii!iJiiiiiiiiii_ _ sh track
_ Front Angle
Screw(Type B) (_)
Attach each Frame Curtain C:_the window sash using
screws C>(Type C).
a,
CAUTION: Do not drill a hole in the bottom
pan. The unit is designed to operate with
approximately 1/2" of water in bottom pan.
There is no need to add water if the pan is
dry.
J
S:iiii
Slide the unit into the cabinet.
_lb CAUTION: For security purpose, reinstall
screws (Type A) at cabinet's sides.
Screw(Type A)
Pow_
Screw
(Type A)
}_ Cut the Foam-Strip ¢_ to the proper length and insert
between the upper window sash and the lower
window sash.
Owner's Manual 15