LG LWHD1006R Owner's Manual page 13

Installation
NO. NAME OF PARTS Q'TY
1 FRAME CURTAIN 2
2 SILL SUPPORT 2
3 BOLT 2
4 NUT 2
5 SCREW (TYPE A) 13
6 SCREW (TYPE B) 3
7 SCREW (TYPE C) 5
8 FOAM-STRIP 1
9 DRAIN PIPE 1
10 FRAME GUIDE 2
11 WINDOW LOCKING BRACKET 1
12 FOAM-PE 1
SCREWDRIVER(Philips and Flatead), RULER, KNIFE, HAMMER, PENCIL, LEVEL ]
PREPARATION OF CHASSIS
Remove the screws which fasten the
cabinet at both sides and at the back.
Slide the unit from the cabinet by gripping
the base pan handle and pulling forward
while bracing the cabinet.
Cut the window sash seal to the proper
length. Peel off the backing and attach
the Foam-PE @ to the underside of
the window sash.
Insert the Frame Guides @ into the
bottom of the cabinet.
Insert the Frame Curtain O into the Upper
Guide and Frame Guides @.
_ Fasten the curtains to the unit with 4 Type
A screws ®.
Screws
Owner's Manual 13