HY-CLOR i1 Quick Start Manual

QUICK START GUIDE
Step 1 – Assembling
1 2
a
a a
a
a
a
a
b b
b b
b
b
b
c
• Fully assembled.
• Insert the flipper (a) into the cleaner,
• Please note: All robots are tested. It is
ensuring that its notch is aligned
normal to see some moisture when first
with the groove (b) on the right side
opened.
of the cylinder. It should click into
place. Push rubber cap (c) into round
opening on (b).
help@hyclor.com.au | hyclor.com.au
i
i i
i
i
i
QUICK START GUIDE
Step 2 – Charging
3 5
• Remove the rubber cap from the
charging port, and ensure it is dry. • Fully charge your device before first
use.
• Always dry the charging terminals.
Do not charge if wet • It could take up to 2.5 hours to charge.
4
• Insert charger cable into
the charging port, and keep
your device at least 3m
away from pool.
• Do not charge if it is wet.
Wait until it is completely
dry.
i
Step 3 – Customise your cleaning cycle
(Ensure your robot is fully charged before choosing a cycle)
6
When fully
charged!
All 4 lights will
be green.
• Turn on the device, and you will hear
a beep. The LED lights will turn to
solid blue.
QUICK START GUIDE
7
120min*1
(Default Cycle)
60min*2
(2 days in a row)
40min*3
(3 days in a row)
30min*4
(4 days out of 7)
• Press the power button to toggle
between cleaning cycles.
• For more information on cleaning cycle,
please refer to the user manual.
See user manuals for more details