Grizzly G0440HEP Read This First Manual
  1. Manuals
  2. Brands
  3. Grizzly Manuals
  4. Dust Collector
  5. G0440HEP
  6. Read this first manual

Grizzly G0440HEP Read This First Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
The following changes were made since the owner's manual was printed:
•
The frame now has square holes for carriage bolts.
•
The dust collection drum now has a handle for easy hood raising.
•
The dust collector cannot be wall-mounted.
•
There is now a pressure gauge for determining when to clean or replace the filters.
Aside from this information, all other content in the owner's manual applies and MUST be read and under-
stood for your own safety. IMPORTANT: Keep this update with the owner's manual for future reference.
For questions or help, contact our Tech Support at (570) 546-9663 or techsupport@grizzly.com.
Revised Specifications
Product Dimensions:
Width (side-to-side) x Depth (front-to-back) x Height ........................................62-1/2 x 33 x 96-1/2 in.
Footprint (Length x Width) ..................................................................................................... 33 x 33 in.
Revised Needed for Setup
Description
•
Assistants or Lifting Equipment .. As Needed
•
Wrenches or Sockets
•
Wrenches or Sockets
•
90° Square ................................................. 1
•
Scrap Cardboard ........................ As Needed
•
Thread Locking Compound ........ As Needed
•
Silicon Sealant ............................ As Needed
•
Duct Tape ................................... As Needed
•
Phillips Head Screwdriver #2 ..................... 1
•
Flat Head Screwdriver
•
Wrench or Socket 5.5mm ........................... 1
•
Mounting Hardware .................... As Needed
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
READ THIS FIRST
Qty
⁄
" ........................... 2
9
16
⁄
" ............................ 2
1
2
⁄
" .......................... 1
1
4
COPYRIGHT © MAY, 2021 BY GRIZZLY INDUSTRIAL, INC.
#CS21884 PRINTED IN TAIWAN
Model G0440HEP
***IMPORTANT UPDATE***
For Machines Mfd. Since 12/20,
Manual Insert Revised 11/17,
and Owner's Manual Revised 02/19

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the G0440HEP and is the answer not in the manual?

Questions and answers

Related Manuals for Grizzly G0440HEP

Summary of Contents for Grizzly G0440HEP

  • Page 1 For Machines Mfd. Since 12/20, Manual Insert Revised 11/17, and Owner's Manual Revised 02/19 For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com The following changes were made since the owner's manual was printed: •...
  • Page 2 The included pressure gauge for the Model floor surface, making it easy to unbolt and move G0440HEP provides an easy way to check if the the stand and machine later, if needed. However, filters require cleaning or replacement.
  • Page 3 Revised Parts Breakdown 232AV2 226V2 40V2 119V2 115V2 122V2 118V2 44V2 50V2 120V2 52AV2 121V2 52V2 G0440HEP Update (Mfd. Since 12/20)
  • Page 4 P0440HEP122V2 STAND SWITCH BRACKET V2.12.20 52V2 P0440HEP052V2 COLLECTION DRUM 35GAL V2.12.20 226V2 P0440HEP226V2 FILTER ADAPTER V2.12.20 P0440HEP063 FENDER WASHER 5/16 P0440HEP227 HEX BOLT 3/8-16 X 1 P0440HEP064 HANDLE HOOK 232AV2 P0440HEP232AV2 HEPA FILTER KIT V2.12.20 G0440HEP Update (Mfd. Since 12/20)
  • Page 5 AC. Collection Drum Plastic Handle ....1 AD. HEPA Canister Filter Assembly ....1 AE. Filter Collection Bag ........1 AF. Foam Tape Roll 5 x 50mm ......1 AG. Hose Clamp 7" ........... 1 Figure 4. Model G0440HEP inventory. G0440HEP Update (Mfd. Since 12/20)
  • Page 6 " ........2 BA. Hex Nuts ⁄ "-18 ........76 BB. Hex Nuts ⁄ "-16 ........15 BC. Lock Nuts ⁄ "-16 ........15 BD. Acorn Nuts ⁄ "-18 ........2 Figure 5. Contents of stand box. G0440HEP Update (Mfd. Since 12/20)
  • Page 7 Step 35. Stand Filter Assembly Gasket x 16 Filter Adapter Lower Stand Brace Figure 8. Lower stand braces attached to stand Figure 6. Attaching filter adapter to filter assembly for 55 gallon collection capacity. assembly. G0440HEP Update (Mfd. Since 12/20)
  • Page 8 55 gallon collection capacity. Square stand, as shown in Figure 11, then tighten all hardware. Figure 13. Intake cylinder attached to bottom of motor housing. Figure 11. Example of squaring stand assembly before tightening stand hardware. G0440HEP Update (Mfd. Since 12/20)
  • Page 9 (8) ⁄ "-18 hex nuts. its parts. To reduce this risk, use a forklift (or other lifting equipment) rated for weight of this machine. Figure 15. Collector mounting brackets and securing fasteners. G0440HEP Update (Mfd. Since 12/20)
  • Page 10 20. Push (1) end of air hose through strain relief x 12 hole in filter adapter. 21. Apply 3 x 6 x 300mm foam tape to mating Figure 18. Example of securing blower on intake surface of cyclone vacuum port. barrel. -10- G0440HEP Update (Mfd. Since 12/20)
  • Page 11 (see Figure 24). Note: During operation, this ring and vacuum connection to cyclone funnel will prevent col- lection bag from collapsing. Figure 22. Casters attached to lower collection drum. Figure 24. Inserting collection drum vacuum ring. -11- G0440HEP Update (Mfd. Since 12/20)
  • Page 12 34. While holding assembly in place, move col- lection drum assembly under cyclone assem- Drum Lid bly. Press cyclone funnel adapter and springs Springs down to fit under cyclone funnel. Figure 26. Installing cyclone funnel adapter. -12- G0440HEP Update (Mfd. Since 12/20)
  • Page 13 ⁄ " hose clamp (see Drum Lid Figure 33). Figure 30. Cyclone funnel connected to drum lid with flexible hose (35 gallon capacity shown and stand removed for clarity). Figure 33. Connecting vacuum hose. -13- G0440HEP Update (Mfd. Since 12/20)
  • Page 14 Figure 37. Example of filter collection bag secured to filter. 48. Once Test Run from Page 25 of owner's manual is complete, use 7" dust clamp to secure woodworking machine dust hose to inlet port. -14- G0440HEP Update (Mfd. Since 12/20)
  • Page 15 WARRANTY & RETURNS Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance.
  • Page 17 (For owner's manual revised October, 2013) The Model G0440HEP is the same machine as the Model G0440 except for the dual-filtration HEPA filter system and the included stand. Except for the differences noted in this insert, all other content in the Model G0440/G0441 owner's manual applies to this machine.
  • Page 18 " ........2 Vacuum Hose 1 ⁄ " x 98" ......1 U. Collection Drum Vacuum Ring ....1 V. Cyclone Vacuum Tube ....... 1 Figure 1. Model G0440HEP inventory. Model G0442HEP/G0601HEP (Mfd. Since 01/15) Model G0440HEP (Mfd. Since 11/17)
  • Page 19 If you cannot find an item on this list, care- fully check around/inside the machine and packaging materials. Often, these items get lost in packaging materials while unpack- ing or they are pre-installed at the factory. Model G0440HEP (Mfd. Since 11/17)
  • Page 20 MACHINE DATA SHEET Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901 MODEL G0440HEP 2 HP DUAL‐FILTRATION HEPA CYCLONE DUST COLLECTOR Product Dimensions: Weight................................410 lbs. Width (side-to-side) x Depth (front-to-back) x Height..............55-1/4 x 33 x 92 in.
  • Page 21 The information contained herein is deemed accurate as of 11/30/2017 and represents our most recent product specifications. Model G0440HEP PAGE 2 OF 3 Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. Model G0440HEP (Mfd. Since 11/17)
  • Page 22 "-16 x ⁄ " hex bolts, (32) ⁄ " flat washers, and (16) ⁄ "-16 lock nuts (see Figure 3)—only finger-tighten for now. Figure 5. Lower legs on stand assembly. Model G0442HEP/G0601HEP (Mfd. Since 01/15) Model G0440HEP (Mfd. Since 11/17)
  • Page 23 Note: Because this part of the dust collector is not accessible after assembly, consider using Medium Strength Blue Thread Locker (Grizzly Model T21854) on the bolts that secure the intake cylinder to the motor/blower housing assembly to ensure that the fasten- ers won't come loose with vibration.
  • Page 24 12. Fasten the collector assembly to the stand with (8) ⁄ "-16 x 1" hex bolts, (16) ⁄ " flat washers, and (8) ⁄ "-16 lock nuts, as shown in Figure 12. Model G0442HEP/G0601HEP (Mfd. Since 01/15) Model G0440HEP (Mfd. Since 11/17)
  • Page 25 Figure 17. Attaching HEPA filter assembly to blower housing. 17. Complete Step 10 from the G0440 Owner's Manual (see Page 20). 20. Follow assembly Steps 14–21 on Pages 22–24 in Owner's Manual to assemble collec- tion drum. Model G0440HEP (Mfd. Since 11/17)
  • Page 26 ⁄ " hex nuts, " flat washers (see Figure 21). and (16) ⁄ Adapter Gasket Wall-Mount Adapter Figure 21. Attaching wall-mount adapter. Figure 19. G0440HEP filter system completely installed. -10- Model G0442HEP/G0601HEP (Mfd. Since 01/15) Model G0440HEP (Mfd. Since 11/17)
  • Page 27 Rubber Gasket Figure 23. Attaching HEPA filter assembly to wall-mount adapter. Follow assembly Steps 14–2 on Pages 22–24 in Owner's Manual to assemble col- lection drum. Figure 25. G0440HEP wall-mount filter system completely installed. -11- Model G0440HEP (Mfd. Since 11/17)
  • Page 28 Main T27325 Wall-Mount Adapter Kit (Sold Separately) 1-10 232A 230-3 230-2 228-1 230-1 230-5 230-4 -12- Model G0442HEP/G0601HEP (Mfd. Since 01/15) Model G0440HEP (Mfd. Since 11/17)
  • Page 29 230-4 P0440HEP230-4 BAG CLAMP 445MM P0440HEP052A COLLECTION DRUM ASSY 35GAL 230-5 P0440HEP230-5 HEPA FILTER BOTTOM PLATE P0440HEP052 COLLECTION DRUM 35GAL P0440HEP231 DRUM LID PVC RUBBER SEAL 2M P0440HEP053 DRUM LID LATCH ASSEMBLY 232A P0440HEP232A HEPA FILTER KIT -13- Model G0440HEP (Mfd. Since 11/17)
  • Page 30 READ MANUAL LABEL 2W X 3.3H P0440HEP313 RETURN RED HANDLE LABEL P0440HEP306 GLASSES/RESPIRATOR DC LABEL P0440HEP314 GRIZZLY PUTTY TOUCH-UP PAINT P0440HEP307 MOTOR WARNING LABEL P0440HEP315 GRIZZLY.COM LABEL P0440HEP308 MOTOR SPEC LABEL -14- Model G0442HEP/G0601HEP (Mfd. Since 01/15) Model G0440HEP (Mfd. Since 11/17)
  • Page 31 Model G0441 Shown With Optional Stand COPYRIGHT © APRIL, 2005 BY GRIZZLY INDUSTRIAL, INC. REVISED OCTOBER, 2013 (TS) WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
  • Page 32 This manual provides critical safety instructions on the proper setup, operation, maintenance, and service of this machine/tool. Save this document, refer to it often, and use it to instruct other operators. Failure to read, understand and follow the instructions in this manual may result in fire or serious personal injury—including amputation, electrocution, or death.

  • Page 33: Table Of Contents

    Table of Contents INTRODUCTION ..........2 SECTION 4: DESIGNING THE SYSTEM ..26 Machine Description ........2 General ............26 Contact Info............ 2 Duct Material ..........26 Manual Accuracy ........... 2 Metal Duct ..........27 Identification ........... 3 Flexible Duct ..........27 G0440 Machine Data Sheet ......

  • Page 34: Introduction

    Before contacting, please get the serial number and manufacture date of your machine. This will help us help you faster. Grizzly Technical Support 1203 Lycoming Mall Circle Muncy, PA 17756 Manufacture Date Phone: (570) 546-9663 Email: techsupport@grizzly.com...

  • Page 35: Identification

    Identification Blower Motor Housing Inlet Canister Port Filter Assembly Remote Magnetic Switch Optional Stand Vacuum Hose Collection Drum Figure 1. Identification (Model G0441 shown with optional stand). To reduce the risk of serious injury when using this machine, read and understand this entire...

  • Page 36: G0440 Machine Data Sheet

    MACHINE DATA SHEET Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901 MODEL G0440 2 HP CYCLONE DUST COLLECTOR Product Dimensions: Weight................................287 lbs. Width (side-to-side) x Depth (front-to-back) x Height..............59 x 38 x 93-1/2 in. Footprint (Length x Width).......................
  • Page 37 Main Specifications: Operation Dust Collector Type......................Two-Stage (Cyclone) Approved Dust Types..........................Wood Filter Type..........................Pleated Cartridge Airflow Capacity......................1354 CFM @ 2.5 in. SP Max Static Pressure (at 0 CFM)......................10.4 in. Main Inlet Size............................. 7 in. Inlet Adapter Included............................ No Machine Collection Capacity At One Time..................

  • Page 38: G0441 Machine Data Sheet

    G0441 Machine Data Sheet MACHINE DATA SHEET Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901 MODEL G0441 3 HP CYCLONE DUST COLLECTOR Product Dimensions: Weight................................347 lbs. Width (side-to-side) x Depth (front-to-back) x Height............. 60-1/4 x 38-1/2 x 109 in. Footprint (Length x Width).......................
  • Page 39 Main Specifications: Operation Dust Collector Type......................Two-Stage (Cyclone) Approved Dust Types..........................Wood Filter Type..........................Pleated Cartridge Airflow Capacity......................1654 CFM @ 2.0 in. SP Max Static Pressure (at 0 CFM)......................14.2 in. Main Inlet Size............................. 8 in. Inlet Adapter Included............................ No Machine Collection Capacity At One Time.......................

  • Page 40: Section 1: Safety

    SECTION 1: SAFETY For Your Own Safety, Read Instruction Manual Before Operating This Machine The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words intended to convey the level of impor- tance of the safety messages.
  • Page 41 INTENdEd usAGE.­ Only­ use­ machine­ for­ its­ machine­ in­ good­ working­ condition.­ A­ machine­ intended­purpose­and­never­make­modifications­ that­ is­ improperly­ maintained­ could­ malfunction,­ ­ not­ approved­ by­ Grizzly.­ Modifying­ machine­ or­ leading­to­serious­personal­injury­or­death.­ using­ it­ differently­ than­ intended­ may­ result­ in­ ChECK dAMAGEd PARTs.­ Regularly­ inspect­...

  • Page 42: Additional Safety For Dust Collectors

    Additional Safety for Dust Collectors INTENDED USE. This dust collector is designed SUSPENDED DUST PARTICLES AND IGNITION SOURCES. DO NOT operate the dust collector in for collecting wood dust and chips from wood- working machines. DO NOT use it to collect areas where explosion risks are high.

  • Page 43: Section 2: Power Supply

    SECTION 2: POWER SUPPLY Availability Circuit Requirements Before installing the machine, consider the avail- A power supply circuit includes all electrical ability and proximity of the required power supply equipment between the breaker box or fuse panel circuit. If an existing circuit does not meet the in the building and the machine.

  • Page 44: Connection Type

    Connection Type Grounding Instructions A permanently connected (hardwired) power sup- In the event of a malfunction or breakdown, ply is typically installed with wires running through grounding provides a path of least resistance mounted and secured conduit. A disconnecting for electrical current to reduce the risk of electric means, such as a locking switch (see following shock.

  • Page 45: Section 3: Setup

    SECTION 3: SETUP Unpacking This machine presents serious injury hazards Your machine was carefully packaged for safe to untrained users. Read transportation. Remove the packaging materials through this entire manu- from around your machine and inspect it. If you al to become familiar with discover any damage, please call us immediately the controls and opera- at (570) 546-9663 for advice.

  • Page 46: G0440 Inventory

    G0440 Inventory The following is a list of items shipped with your machine. Before beginning setup, lay these items out and inventory them. If any non-proprietary parts are missing (e.g. a nut or a washer), we will gladly replace them; or for the sake of expediency, replacements can be obtained at your local hardware store.

  • Page 47: G0441 Inventory

    G0441 Inventory The following is a description of the main compo- nents shipped with your machine. Lay the compo- nents out to inventory them. Inventory: (Figure 3) A. Intake Cylinder ........... 1 B. Cyclone Funnel .......... 1 C. Intake Barrel ..........1 D.

  • Page 48: Site Considerations

    Site Considerations Weight Load Physical Environment Refer to the Machine Data Sheet for the weight The physical environment where the machine is of your machine. Make sure that the surface upon operated is important for safe operation and lon- which the machine is placed will bear the weight gevity of machine components.

  • Page 49: Wall Mounting

    Wall Mounting Wood Framed Walls, G0440 = Lag Bolts = Lag Bolts, Countersunk Before mounting, make sure you locate your dust 36" collector away from any open flames or potential ignition sources, as fine dust can easily ignite. ⁄ " If you are mounting your dust collector to a wood framed wall, you must build and install the wall 2x12 Board...

  • Page 50: Materials Needed For Concrete/Masonry Wall

    Copy the mounting hole layout pattern from the motor housing (see Figures 7–8) to your Top Row Mounting Hole Height wall mounting board, making sure the Top Row Mounting Hole Height is correct for your dust collector. Use these measurements for hole placement when mounting the Model G0440.

  • Page 51: Assembly

    Assembly Attach the intake cylinder to the bottom of the housing, as shown in Figure 11, using (4) ⁄ "-18 x ⁄ " hex bolts and (4) ⁄ " flat wash- ers. Note: Because this part of the dust collector will not be accessible after assembly, con- HEAVY LIFT! sider using medium strength thread locking...
  • Page 52 Place the intake barrel brace in position Attach the cyclone funnel to the intake barrel and mark the location of the mounting holes with a barrel gasket between them, as shown (shown in Figure 13) with a small pencil, nail, in Figure 15, using (12) ⁄...
  • Page 53 11. Attach the outlet port and filter L-braces to 12. Mount the filter to the L-braces with the brace the blower housing with the outlet gasket gaskets between them, as shown in Figure between the outlet port and the housing, as 19, using (4) ⁄...
  • Page 54 b. Connect the gray flexible hose from b. Attach the 8" x 5" gray flexible hose the outlet port to the canister adapter between the canister adapter and and secure it in place with the two 7" the muffler with two 8" hose clamps, hose clamps, as shown in Figure 21.
  • Page 55 Note—For the Model G0441 Only: If you plan to keep your machine under an 8' ceil- ing, skip Step 15. 15. Model G0441: Connect the upper and lower collection drums together and secure them with the included metal clamp and provided fasteners, as shown in Figure 25.
  • Page 56 18. Insert the rubber seal over the top lip of the 20. Move the collector drum under the dust col- collection drum rim. Pay special attention lector and connect it to the cyclone funnel to the direction of the seal, as shown in the with the clear flexible hose and the two 9"...

  • Page 57: Test Run

    Test Run 22. Fit the plastic canister collection bag over the bottom of the canister filter and clamp in place with the metal bag clamp, as shown in Figure 32. Once the assembly is complete, test run your machine to make sure it runs properly and is ready for regular operation.

  • Page 58: Section 4: Designing The System

    The dust collector is capable of collecting dust from up to three machines running simultaneously. Grizzly offers a complete line of dust collection accessories for setting up a sta- Plastic duct generates static tionary system.

  • Page 59: Metal Duct

    However, the cost of specifically Another disadvantage is the rough internal seams designed flexible duct can vary greatly. Grizzly and crimped ends that unavoidably increase static offers polyethylene hose, which is well suited for pressure loss.

  • Page 60: System Design

    Line Duct Our Workshop Planner will allow you to quickly and easily design and print a basic shop layout. Don't worry, non-Grizzly brand machines can be substituted with Grizzly machines for layout pur- Figure 38. Efficient duct layout. poses. Note: After you're finished, make sure to save your layout for later modification.

  • Page 61: Step 4. Determine Required Cfms

    Directional changes should be kept to a mini- If the machine does not have a built-in dust port, mum. The more directional change fittings use the following table to determine which size of you use directly increases the overall resis- dust port to install.

  • Page 62: Determining Main Line Duct Size

    Experiment with different combinations of blast gates open/closed to find the best results for your system. Determining Main Line Duct Size Write your determined branch line sizes on your drawing, as shown in the following Figure. The general rule of thumb for a main line duct is that the velocity of the airflow must not fall below 3500 FPM.

  • Page 63: Multiple Dust Ports

    Multiple Dust Ports Duct Approximate Approximate Dia. Static Pressure Static Pressure If your machine has multiple dust ports, add the Loss Per Foot of Loss Per Foot total CFM given for each dust port size from Rigid Pipe of Flex Pipe the table provided in the earlier subsection, Main Branch...
  • Page 64 STATIC PRESSURE (Inch/H2O) Elbows/Branches Figure 49. CFM for static pressure loss of line 6" 45˚ Y-Branch ........ 0.329 2 HP GRIZZLY DUST COLLECTOR PERFORMANCE RESULTS connected to a dust collector & router. 4" 45˚ Elbow ........0.225 Max CFM Max SP...

  • Page 65: Example Materials List

    Description Model Quantity 10.0 11.0 STATIC PRESSURE (Inch/H2O) 6" Rigid Pipe at 20' G7364 2 HP GRIZZLY DUST COLLECTOR PERFORMANCE RESULTS 4" Rigid Pipe at 10' G6162 Max CFM Max SP Volts Inlet Impeller 4" Flex Hose at 5'...

  • Page 66: System Grounding

    System Grounding Be sure that you extend the bare copper wire down all branches of the system. Do not forget to connect the wires to each other with wire nuts when two branches meet at a “Y” or “T” connec- Since plastic hose is abundant, relatively inex- tion.

  • Page 67: Section 5: Operations

    OMMEND that you read books, trade maga- zines, or get formal training before begin- ning any projects. Regardless of the con- tent in this section, Grizzly Industrial will not be held liable for accidents caused by lack of training. -35-...

  • Page 68: Section 6: Accessories

    (2) 5' straight pipes, (2) adjustable nipples, (1) risk, only install accessories recommended branch, and (1) 60˚ elbow. for this machine by Grizzly. NOTICE Refer to the newest copy of the Grizzly Catalog for other accessories available for this machine. H7499—Stand for G0440 H7509—Stand for G0441...
  • Page 69 G6163—4" Clamp W1039—Universal Adapter G7343—5" Clamp This seven step adapter provides a multitude G7361—6" Clamp of dust collection reducing options. Simply H5228—7" Clamp cut away unneeded steps with a hacksaw. H5238—8" Clamp Outside diameter step sizes include 1", 2", H5253—9" Clamp 2.5", 3", 4", 5", and 6".

  • Page 70: Section 7: Maintenance

    SECTION 7: MAINTENANCE Cleaning Filter Always disconnect power to the machine before Your new cyclone dust collector has a gentle performing maintenance. brush system inside the filter for cleaning. This Failure to do this may brush system is controlled by the red and black result in serious person- handles shown in Figure 61.

  • Page 71: Removing/Replacing Filter

    Follow the instructions below to perform this procedure. When replacing the filter for the G0440 ask for part number P0440032V2-4. For the G0441, ask for part number P04410032V2-4 from Grizzly at 800-523-4777. Canister Tools Needed Base Open-End Wrench 10mm ........
  • Page 72 Carefully lift the filter out of the canister Re-insert a filter into the canister assembly. assembly, as shown in Figure 65. Note: Make sure the bristles of the brush are straight to ensure efficient cleaning of the filter when needed. 10.

  • Page 73: Section 8: Service

    SECTION 8: SERVICE Review the troubleshooting and procedures in this section to fix or adjust your machine if a problem devel- ops. If you need replacement parts or you are unsure of your repair skills, then feel free to call our Technical Support at (570) 546-9663.

  • Page 74: Section 9: Wiring

    Technical source. Support at (570) 546-9663. The photos and diagrams included in this section are best viewed in color. You can view these pages in color at www.grizzly.com. -42- Model G0440/G0441 (Mfg. Since 03/12)

  • Page 75: G0440 Wiring Diagram

    G0440 Wiring Diagram 220V Motor Ground 1-PHASE 220 VAC DISCONNECT SWITCH (as recommended) OL_NO 220V Circuit Board 13NO NHD C-12D 14NO NHD NTH-14 ON/OFF Switch 220V Magnetic Contactor Switch and Overload Relay READ ELECTRICAL SAFETY -43- Model G0440/G0441 (Mfg. Since 03/12) ON PAGE 42!

  • Page 76: G0441 Wiring Diagram

    G0441 Wiring Diagram 220V Motor Ground 1-PHASE 220 VAC DISCONNECT SWITCH (as recommended) OL_NO 220V Circuit Board 13NO NHD C-18D 14NO ON/OFF NHD NTH-25 Switch 220V Magnetic Contactor Switch and Overload Relay READ ELECTRICAL SAFETY -44- Model G0440/G0441 (Mfg. Since 03/12) ON PAGE 42!

  • Page 77: G0440/G0441 Electrical Components

    G0440/G0441 Electrical Components CONNECTION 220V Motor Wiring Figure 67. Motor wiring. Figure 68. Motor wiring schematic. Magnetic Switch Contactor Circuit Board Overload Relay Junction Box Figure 69. G0441 magnetic switch assembly. READ ELECTRICAL SAFETY -45- Model G0440/G0441 (Mfg. Since 03/12) ON PAGE 42!

  • Page 78: Section 10: Parts

    3V3-2 3V3-3 Grizzly Cyclone Induction Motor Connections: 28-1 OUTPUT DUTY HEAT 62V2 VOLT WEIGHT CLASS DATE PHASE SER. NO. Manufactured for Grizzly in Taiwan 44V2 32V3-1 32V3 32V2-2 32V2-3 32V2-4 72V2 32V2-3 52V2A 51V2 32V2-5 34V2 52V2 -46- Model G0440/G0441 (Mfg. Since 03/12)
  • Page 79 P0440021 OUTLET GASKET 306 X 226MM 72V2 P0440072V2 MACHINE ID LABEL CSA V2.01.12 P0440022 OUTLET PORT P0440073 MODEL NO/HP/GRIZZLY LABEL (LARGE) P0440023 HEX BOLT 5/16-18 X 1 P0440074 MODEL NO/HP/GRIZZLY LABEL (SMALL) P0440024 FLAT WASHER 5/16 P0440077 EXT TOOTH WASHER 3/8...

  • Page 80: G0441 Main

    3V3-3 27A-2 Grizzly Cyclone Induction Motor 28-1 Connections: OUTPUT DUTY HEAT 68V2 VOLT WEIGHT CLASS DATE PHASE SER. NO. Manufactured for Grizzly in Taiwan 32V3-1 44V2 32V3 32V2-2 53V2A 32V2-3 32V2-4 32V2-3 78V2 51V3 32V2-5 34V2 107 108 53V2 -48-...
  • Page 81 ELECTRICITY LABEL P0441023 HEX BOLT 5/16-18 X 1 78V2 P0441078V2 MACHINE ID LABEL CSA V2.01.12 P0441024 FLAT WASHER 5/16 P0441079 MODEL NO/HP/GRIZZLY LABEL (LARGE) P0441025 HEX NUT 5/16-18 P0441080 MODEL NO/HP/GRIZZLY LABEL (SMALL) P0441026 HOSE CLAMP 8" P0441083 MUFFLER 8"...
  • Page 82 -50- Model G0440/G0441 (Mfg. Since 03/12)
  • Page 83 Would you recommend Grizzly Industrial to a friend? _____ Yes _____No Would you allow us to use your name as a reference for Grizzly customers in your area? Note: We never use names more than 3 times. _____ Yes _____No 10.
  • Page 84 FOLD ALONG DOTTED LINE Place Stamp Here GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 FOLD ALONG DOTTED LINE Send a Grizzly Catalog to a friend: Name_______________________________ Street_______________________________ City______________State______Zip______ TAPE ALONG EDGES--PLEASE DO NOT STAPLE...

  • Page 85: Warranty And Returns

    WARRANTY AND RETURNS Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance.

Table of Contents