Welcome to Electrolux! Thank you for choosing our appliance. Get usage advice, brochures, trouble shooter, service and repair information: www.electrolux.com/support Subject to change without notice. CONTENTS 1. SAFETY INFORMATION................2 2. SAFETY INSTRUCTIONS................4 3. INSTALLATION....................6 4. PRODUCT DESCRIPTION................8 5.
Page 3
• Keep all packaging away from children and dispose of it appropriately. • WARNING: The appliance and its accessible parts become hot during use. Keep children and pets away from the appliance when in use and when cooling down. • If the appliance has a child safety device, it should be activated.
• Metallic objects such as knives, forks, spoons and lids should not be placed on the hob surface since they can get hot. • Do not use the appliance before installing it in the built-in structure. • Do not use a steam cleaner to clean the appliance. •...
Page 5
– Do not store any small pieces or • If the mains socket is loose, do not sheets of paper that could be pulled in, connect the mains plug. as they can damage the cooling fans • Do not pull the mains cable to disconnect or impair the cooling system.
• Switch off the appliance and let it cool WARNING! down before cleaning. • Do not use water spray and steam to Risk of fire and explosion. clean the appliance. • Fats and oil when heated can release • Clean the appliance with a moist soft flammable vapours.
Page 7
A = min. 6 mm, for double ovens from AEG, Electrolux and Zanussi. A = min. 12 mm, for double ovens from other brands. Find the video tutorial "How to install your Electrolux Induction Hob - Worktop min. min. installation" by typing out the full name 500mm 50mm indicated in the graphic below.
4. PRODUCT DESCRIPTION 4.1 Cooking surface layout Induction cooking zone Control panel 4.2 Control panel layout Use the sensor fields to operate the appliance. The displays, indicators and sounds tell which functions operate. Sensor Function Comment field On / Off To activate and deactivate the hob.
Sensor Function Comment field Hob²Hood To activate and deactivate the manual mode of the function. To select the cooking zone. To increase or decrease the time. PowerBoost To activate the function. Control bar To set a heat setting. 4.3 Heat setting displays Display Description The cooking zone is deactivated.
Page 10
Remove the object or clean the control The indicators appear when a cooking zone panel. is hot. They show the level of the residual • the hob gets too hot (e.g. when a heat for the cooking zones you are currently saucepan boils dry).
Page 11
To activate the function: touch of the timer. appears. When the indicator of the Refer to “Technical data” chapter. cooking zone starts to flash, the time counts To activate the function for a cooking up. The display switches between and the counted time (in minutes).
Page 12
Set the heat setting first. • Count Down Timer comes down • you put something on the control panel. To activate the function: touch 5.13 Power management comes on for 4 seconds. The Timer stays on. If multiple zones are active and the To deactivate the function: touch .
Page 13
5.14 Hob²Hood 2. Press for 3 seconds. The display comes on and goes off. It is an advanced automatic function which connects the hob to a special hood. Both the 3. Press for 3 seconds. hob and the hood have an infrared signal 4.
6. HINTS AND TIPS – Cookware with a diameter smaller WARNING! than the declared minimum receives only part of the power generated by Refer to Safety chapters. the cooking zone which results in slower heating. 6.1 Cookware – For both safety reasons and optimal cooking results, do not use cookware larger than indicated in "Cooking For induction cooking zones a strong...
Page 15
The data in the table is for guidance only. Heat setting Use to: Time Hints (min) Keep cooked food warm. as neces‐ Put a lid on the cookware. sary 1 - 3 Hollandaise sauce; melt: butter, choco‐ 5 - 25 Mix from time to time.
The Electrolux cooker hoods that work with this function must have the symbol Other remotely controlled appliances may block the signal. Do not use any such appliances near to the hob while Hob²Hood is on. Cooker hoods with the Hob²Hood function...
Page 17
Problem Possible cause Remedy The fuse is blown. Make sure that the fuse is the cause of the malfunction. If the fuse is blown again and again, contact a qualified electrician. You did not set the heat setting for Activate the hob again and set the 10 seconds.
10. ENERGY EFFICIENCY 10.1 Product Information according to EU and UK Ecodesign Regulations Model identification LIT81443 Type of hob Built-In Hob Number of cooking zones Heating technology Induction Diameter of circular cooking zones (Ø) Left front 21.0 cm Left rear 21.0 cm...
Need help?
Do you have a question about the LIT81443 and is the answer not in the manual?
Questions and answers